Used Shrink for sale (510)

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Redjd S Svhjpfx Acvor Integrated socket 16 A Chain lubrification

Year of construction: 1989, condition: used, Standard equipment Rodpfx Aebriv Nscver

Condition: used, Year of construction: 2009, operating hours: 20,000 h, machine/vehicle number: FA47, Used shrink wrapper SMI SK 450FTechnical Specifications & Performance DataThe SMI SK 450F is a second hand shrink wrapper engineered for high-speed industrial packaging in beverage production and related sectors. This model is well suited to operate downstream of rinsing, filling, capping, and labeling blocks within a used bottling line, delivering stable, brandable bundles for transport and retail.Manufacturer / Model: SMI SK 450FYear: 2009Category: Shrink Wrapper (film application with shrink tunnel)Production speed: up to 28,000 bottles/hour (format dependent)Bundling rate: up to 45 bundles/minute (collation dependent)Operating type: Automatic, continuous-duty shrink wrappingInfeed configuration: Straight inline entry for high-speed linesFilm handling: Works with printed film (print-mark registration) and neutral filmPackaging styles: Film-only and tray+film configurations (subject to setup)Typical collations: 4×3 0.33 L, 3×2 0.33 L, 4×3 0.50 L, 3×2 1.5 L, 2×2 1.5 L, 3×2 1.5 L, 3×2 2.0 L, 2×2 2.0 LContainer materials: PET and glass bottles, aluminum cansProduct types: Water, juice, beer, wine, carbonated soft drinks, energy drinks, and moreTechnical measurements: Dimensions/weights available in manualsAdvanced Automation & Control SystemsDesigned for demanding beverage production, the SK 450F provides robust automation to maintain output and pack quality at speed.Operator-friendly HMI for recipe selection, format parameters, and diagnosticsAutomatic film unwinding with tension control for stable wrapping of PET, glass, and cansPrint-mark sensor for precise registration when running printed filmShrink tunnel with zoned temperature control for consistent, wrinkle-free bundlesIntegrated safety interlocks, emergency stops, and safety guards includedElectrical specifications and wiring diagrams available in the manualsProduction Line Integration CapabilitiesThis shrink wrapper integrates seamlessly into a used bottling line alongside upstream rinsing, filling, capping, and labeling systems, and downstream conveying, case handling, and palletizing.Inline interface with conveyors, accumulation tables, and inspection systemsQuick format change with recipe-based adjustments for varied collationsCompatible with multi-product schedules across water, juice, beer, wine, and mixed SKUsSynchronization options for line speed following and start/stop handshakesMachine Condition & Maintenance HistoryCondition: IN STORAGE, second hand unit from 2009Safety features included as part of the delivered scopeManuals available for operation, maintenance, and electrical referencesGener... Rodpfx Acoyhbzwjvsr

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: FA58, Used TECMI - Smipack shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for reliable bundling and shrink packaging in high-demand beverage production and industrial packaging environments. Manufactured by TECMI, the model BP802ARV 380R delivers consistent throughput and robust construction suitable for second hand and used bottling line integrations.Manufacturer: TECMIModel: BP802ARV 380RYear: 2013Production speed: 8,000–12,000 bpmFormats: PET 0.38L bottles, 24-pack bundlesContainer types: PET bottlesDimensions (X × Y × Z): 4140 × 3230 × 2095–2255 mmWeight: 1400 kgElectrical data: 440 V, 60 Hz, 27.25 kW, 45 A, 3PH+PEAdvanced Automation & Control SystemsDesigned for automatic operation, the TECMI BP802ARV 380R streamlines pack formation and shrink-wrapping with minimal operator intervention. Its architecture supports precise film handling, consistent sealing, and stable oven performance for uniform pack quality across long shifts. The electrical system is configured for industrial-duty 440 V, 60 Hz power, with optimized energy usage at 27.25 kW. Safety-rated components and clear operator stations help ensure dependable performance with straightforward controls suitable for modern production standards.Production Line Integration CapabilitiesThis shrink wrapper integrates smoothly as a standalone machine or in-line with upstream and downstream bottling equipment, including conveyors, fillers, labelers, and case handling units. It is well-suited to beverage production lines that handle PET bottles and require regular format changes for multi-pack configurations. The machine’s layout accommodates standard conveying interfaces for efficient infeed and discharge, enabling flexible installation within existing packaging machinery cells on used bottling line upgrades.Machine Condition & Maintenance HistoryThe machine is currently in storage, presenting an excellent opportunity for facilities seeking a second hand shrink wrapper ready to be recommissioned. Its year of manufacture (2013) and industrial-grade build provide a solid foundation for reliable operation after standard installation checks and start-up procedures.Operational Performance & VersatilityOptimized for PET bottle bundling in 24-pack configurations, the BP802ARV 380R provides consistent throughput across the 8,000–12,000 bpm range, supporting high-volume beverage production. The shrink tunnel delivers stable temperature control for tight, visually consistent packs. Its design supports common beverage applications where durable film seals and stable packs are critical for downstream palletizing and logistics.Installation Requirements & Site PreparationPlan for a footprint consistent with the layout dimensions (X: 4140 mm, Y: 3230 mm, Z: 2095–2255 mm). Provide a 3-phase 440 V, 60 Hz electrical supply with appropriate protection for a connected load of approximately 27.25 kW and 45 A nominal current. Ensure adequate ventilation around the shrink tunnel and safe access for operators and ma... Rsdpfx Acsyhbh Dovsr

Condition: excellent (used), Year of construction: 2017, Reiser GK512B Vacuum chamber packaging line Redjwtzd Rjpfx Acvsr 2017, Stainless vaccum chamber packaging line, consisting of Supervac GK Vacuum chamber, Supervac AT hot water shrink tank and Supervac BL15 Drying tunnel, also comes with Supervac BG450 bag opener, 3Ph

Condition: good (used), Year of construction: 2010, Wraps A700S Shrink sleeve wrapper A700S shrink wrapper, sleeve wrapper machine, sealing bar 750mm width, max product 600mm x 400mm, ideal for trays, bottles, cans, food, drinks, toiletries and more, mobile, 3Ph Rsdpswp Iuuefx Acvjr

Condition: good (used), Year of construction: 2008, Supervac GK 840 B Shrink Wrapper 9.9 KW Rodpfxequ U D Dj Acvsr 23.2 amp 700mm Belt Width Three Phase Power Fully Stainless Steel

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The following three-part packaging line is offered on behalf of the owner, consisting of: + One semi-automatic L-sealer Sealing frame: 900 x 700 mm Product conveyor belt Film separator sheet Film roll holder for PO and PE films Machine is mobile 230 V, 3 m cable Year of manufacture: 2013, manufacturer unknown + One shrink tunnel Pass-through height: 250 mm Pass-through width: 500 mm Tunnel length (hood): 1,300 mm Rod spacing: 25 mm Three-phase current, 16 A and + One product conveyor belt 1,000 x 400 mm Adjustable side guides Harting connector The machine comes from a demonstration room, has correspondingly few operating hours, and is therefore in very good overall condition. The machine location is Salzgitter. The total price of 4,275 euros is ex works, unpacked, plus VAT. The individual components of the line can also be purchased separately. The individual prices – also ex works, unpacked, plus VAT – are as follows: Redpexq Hcqjfx Acvsr L-sealer: 1,485 euros Shrink tunnel: 2,250 euros Product conveyor belt: 540 euros

Condition: ready for operation (used), Manufacturer: Beck -external sizes: 1700x1010x1400mm Rjdpfeu Nuyiex Acver -Permeable cross section: 540x240mm -The temperature range: 0-400 °C

Condition: used, Year of construction: 2007, Shrink wrapping machine BVM BMS 6030 W Rjdpfx Acsygwdfjver Year: 2007 With shrink tunnel

Condition: like new (used), Year of construction: 2018, Shrink Tunnel, Film Shrink Tunnel Manufacturer: Diez Model: HTC5030D Year of manufacture: 2018 No operating hours! Rjdex Avxrepfx Acvor Pass-through width: approx. 50 cm Pass-through height: approx. 30 cm Overall length: approx. 220 cm 21225

Condition: used, Year of construction: 2008, machine/vehicle number: FA55, Machine Overview Rjdpfxsxdnbzs Acvor The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray wrap with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container infeed system (to be provided by the line) Year of manufacture: 2008; Overhauled: 2022 Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Package configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability). Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application. Integrated diagnostics, alarm history and counters (shift/lot totals). Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status. Electrical protection degree: IP54 for the electrical system and motors. Line Integration Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies alignment with fillers, labellers and downstream conveying. Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration. Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering). Condition & Maintenance Overall status: Ready for operation. Overhaul completed in 2022 to restore full functionality. Preventive maintenance recommended: periodic inspection of film path and sealing elements, collation guides, tray magazine mechanisms, and conveyor chains/belts. Documentation and spare parts recommendations can be provided during commissioning and FAT/SAT planning. Performance & Versatility Wide format range from 0.5 L to 10 L enables use across beverage, edible oil, household/industrial liquids and similar appl...

Condition: good (used), Year of construction: 2015, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, Cheops Tray shrink packer Made By CHEOPS spol. s r.o. TERMOPAK 400TP – upto 400 Trays per hour Ability to pack tray+ film, Film only or pad+film Rjdpfsx Dantjx Acvsr For use with pop-lock or pre made trays – existing cardboard supplier details can be provided, along with existing cutters. Lifters and frames for the following formats : 200ml bottles – 24 pack 250ml bottles – 24 pack 330ml bottles – 12/24 pack 500ml 1914 style tall bottles – 12 pack 750ml bottles – 12 pack Lifting heads for: 500ml stumpy bottles – 8/12 pack In use till end of January 2026 We used on glass but with different heads could pack PET / Cans. Selling as increased production capacity.

Condition: used, Year of construction: 2000, functionality: fully functional, Tunnel originally supplied by Nodema to the customer from whom we took it back in exchange. Inspected by Nodema. Rsdpfeylnr Dsx Acver

Condition: reconditioned (used), Year of construction: 1996, Completely reconditioned BVM shrink tunnel. Rsdsuihczspfx Acvsr

Condition: not inspected (used), Year of construction: 2011, MINIPACK-TORRE SC55 – SHRINK WRAPPING MACHINE Redswu Hczepfx Acver YEAR 2011

Condition: used, Year of construction: 2008, machine/vehicle number: FA56, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process. Site Requirements Electrical supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth). Auxiliaries: 24 V DC. Rjdpfsx H Thzsx Acvsr Instrumentation voltages: 24 V AC – 230 V AC. Electrical enclosure protection: IP54; motor protection: IP54. Ambient conditions: temperature +5 °C to +40 °C; relative humidity 30%–80% non-condensing; altitude up to 1000 m a.s.l.; no harmful gases or explo...

Condition: good (used), Year of construction: 2013, SMIPack BP600 Monoblock semi auto shrink wrapper with sealing bar Rodpsx H Thhefx Acver 2013, Monoblock semi auto shrink wrapper with sealing bar, sealing bar 550mm, max output 10 packs per min, max product height 380mm, 3Ph

Condition: good (used), Rochman SVA6035 Sleeve wrapper with shrink tunnel Rochman shrink wrapper, 600mm sealing bar, adjustable temperature and speed controls, once sealed feeds into SMIPack T650EF shrink tunnel, max product height 300mm, 3Ph Rodpfx Acsx H Tgqovsr

Condition: good (used), SMIPack FP560A Lsealer and shrink tunnel Rsdpfx Aex H Tfgocvsr 2011, Semi auto L sealer, sealing bar 560mm x 430mm, max pack height 230mm, up to 1500 packs per hour, mobile, 1ph, then feeds onto SMIPack T450 shrink tunnel, adjustable temp and speed controls, mobile, 3Ph

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Redjv D If Dspfx Acver Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Condition: new, Year of construction: 2020, SEE photos + PDF layout ATTACHED 1 NEW CSP Aut. complete parquet shrink foil packing line (year 2020) never in use. Rjdpfx Aoypb U Tjcver TOTAL LINE consisting of: roller track + industrial parquet scanner + strapping machine + shrink foil packing line AVM 700 + roller conveyor + heating unit + aut. labelling + collect accumulator with double lenght cross conveyor. (see pdf layout)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Hood shrink and sealing machine Minipack-Torre Model SC 55 Film width up to max. 60 cm, 15 to 50 microns Max. product dimensions for packaging: 50x38xH20 cm, 15 kg Machine dimensions: 126x81xH131 cm, 100 kg 230V/50Hz Rsdpfx Aceyuywqovjr

Condition: used, Year of construction: 2013, Overview This shrink-wrapper was manufactured in 2013 by the Italian company OCME S.p.A.. The Vega HT 60/2 SE is a versatile film packer designed for wrapping PET, glass, or can containers into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a running line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides for square bottles and an optional bottle divider. A semi-automatic roll-lifting robot for film roll changes is also included. Optional outfeed conveyors can be provided on request. Technical data  Formats: From 0.25 L to 2.5 L; currently 1.5 L in 2×(3×2) packs Container types: PET, glass, and cans Application: All beverages and liquid products Machine configuration: Film only (with optional tray) Infeed: Adjustable guide for square bottles, bottle divider Outfeed: Optional pack conveyors Condition: Very good, immediately available Status: Installed as part of a line Redpeygkwljfx Acvjr

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 32.0348.03.85, input voltage: 380 V, power: 8 kW (10.88 HP), Equipment: documentation/manual, Manufacturer: MEURER Model: CMK/M Type: L-sealing machine + shrink tunnel Last used as a bundler for processed cheese (round cartons) Rjdpjxrnrvefx Acver Electrical power: 8 kW Voltage: 380 V Condition: very good and fully functional Machine can be inspected and tested under power