Used Shredders for sale (947)

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Iedpfod Dgw Ujx Ah Hjbd Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 480 mm, number of blades: 84, rotor width: 1,500 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Genox BH1500L - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 150kW (2x75kW) Drive power with VFD motor controllers and heavy duty oversized gearboxes, 80rpm shaft speed. 1500mm wide x 480mm diameter Rotor with 84pcs, 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Ibjdsxwqm Tspfx Ah Hed This is an ex-display machine used only for show at a recent exhibition and is available immediately, ex-works our EU Workshop based in Frankenthal, Germany.

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Ibedpfx Ahotql S To Hjd Shaft length: 1500 mm Weight 14,500 kg Standard configuration Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 12/2026, Bread Residue Shredder Hommel Rotormat 2000 Super "The Universal Shredder" Stainless steel construction High performance Connection: 400V, 16A-CEE plug Dimensions: 690 x 650 x 1550mm (W x D x H) Used machine, cleaned With warranty and spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Ijdjw Tqibepfx Ah Hjbd Options: Additional screen Delivery service Maintenance contract Visit our large showroom!

Condition: used, Year of construction: 2018, operating hours: 3,297 h, functionality: unexamined, Basic system equipment features: Feed belt: • Highly wear-resistant, forged special chain • Feed belt width: 1,700 mm • Feed belt length: 4,700 mm Hydraulic unit: • Feed roller and feed belt each driven separately with their own drive and gearbox. The feed belt and feed roller speeds are infinitely adjustable. Overload protection via speed monitoring and reversing mechanism. • Hydraulic tank capacity: 220 liters. Feed: • The feed roller is hydraulically driven, mounted in a pendulum bearing, and guided by two rack bars. • Feed opening: approx. 660 mm height x 1,700 mm width. Hammermill: • 46 hammers, hammer width: 80 mm • Individual hammer tips replaceable • Hammermill width: 1,700 mm Ibodpfoxc Ibfex Ah Hed • Rotor diameter: 999 mm • Rotor speed: 1,000 rpm Engine: • SCANIA turbo diesel engine, output of 478 kW, complying with the applicable Euro emission standard Drive: • Direct drive via 8 V-belts Hopper dimensions: • Hopper opening length: 4,800 mm • Hopper opening width: 2,400 mm Throughput capacity: • 200–300 m³/h or more, depending on material

Condition: good (used), Year of construction: 2025, operating hours: 380 h, functionality: fully functional, machine/vehicle number: 390, total length: 11,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 35,000 kg, hopper volume: 5 l, rotor diameter: 860 mm, rotational speed (max.): 45 rpm, power: 404.52 kW (549.99 HP), Equipment: rotational speed infinitely variable, Arjes Titan 900 Demo machine Ibsdpfx Ahjxraigj Hsd Year of manufacture: 2025 Hours: 380 Equipped with paddle rotors and/or star rotors Also standard equipped with: - Magnet - Reversible fan - Remote control

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net Iodpjd E R D Ssfx Ah Hobd - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: reconditioned (used), Year of construction: 2016, overall weight: 45,000 kg, power: 566.33 kW (769.99 HP), Mobile Shredder on tracks LINDNER UUraco 95 DK. Ibodpfx Ahjw Ip Ske Hed Diesel engine (770 HP) new approx. 3.000 hours ago. Tilting hoppe, discharge conveyor, overband magnet, radio remote control.

Condition: new, Year of construction: 2025, Arjes / Eggersmann Impaktor 250 EVO 2 - incl. 1 set of shafts NEW - Arjes Impaktor 250 EVO 2 with one set of shafts Iodjwnpwzspfx Ah Hsbd Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight: 14,500 kg Standard engine configuration: Volvo-Penta, Stage V / 129 kW Hook lift Track chassis Overband magnet with discharge container Water spraying for less dust spreading Remote control 1 set of shafts of choice, Shafts installed and incl. quick-change cassette and breaker bars Star shafts (tires, trash, plastic) Concrete shafts (demolition waste, asphalt) Paddle shafts (green waste, wood) Optional on request: - Crushing baskets for concrete and wood - Winding fans - Finger screen, disc screen - and more…

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Ibodpfx Asxtgkmoh Hed Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: good (used), Year of construction: 2022, operating hours: 2,100 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Ibsdpfx Ahswnfwqs Hsd Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: excellent (used), Bargain Zeno with 18 kW drawer-type shredder, new gearbox, screw discharge, new shaft bearings Ibedpfxsxt T E Dj Ah Hod

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net Iedpfx Ahegmfa Ae Hobd - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet Ibedpfel I Dx Nsx Ah Hsd incl. 7 unused spare coils

Condition: used, Year of construction: 2020, operating hours: 6,200 h, Caterpillar engine (kW/HP): 328/446 Ibodpfexvz Dgox Ah Hsd Discharge height: 2,898 mm Drop height: 1,830–4,151 mm (at 35°) Shredding unit: Screen basket: 250 mm Roller speed (min⁻¹): 1st gear: 22 | 2nd gear: 34 Roller length: 2,820 mm Roller diameter: 610 mm Throughput depending on material: 60 t/h Weight: 24.6 t Transport dimensions (L x W x H, mm): 6,940 x 2,854 x 3,268 Slow-speed 2-shaft shredder for wood and green waste. Features: Magnetic separator / Bio-cutter head / Radio remote control / Material: Very well-suited for green waste, root stocks, and all types of wood waste and reclaimed timber / Central lubrication / Screen baskets available: 80 mm round, 100 mm, 125 mm, 150 mm, 180 mm, or 250 mm.

Condition: used, HERBOLD single-shaft shredder EWS 45/200 Ibodpfx Ajw Rw U Ejh Hed With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: used, Year of construction: 2019, operating hours: 6,680 h, functionality: fully functional, overall weight: 19,000 kg, power: 390 kW (530.25 HP), Equipment: Basic Package AK560 Eco-Power: - Central axle trailer chassis with 2 axles, 80 km/h road approval - Brake system incl. ABS and lighting according to EC directive - 50 mm EC towing eye with bolt-on shoe - Tyres 385/65 R22.5 - Hydraulically adjustable support leg - Splash guards (inner and side-mounted mudguards) - Permissible total weight 19,000 kg - Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT IV emission standard - Load-dependent feed control incl. automatic reversing scraper floor - Fuel tank 450 litres - Feed roller: length 1,690 mm, diameter 510 mm, fitted with tooth segments - Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Standard: "Streusel" flail tip - Centrally positioned lubrication strips - Electric pump for operating cylinder functions (e.g. raising/lowering support foot and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off - 24 V electric control system - Separate control box at the rear of the machine - Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, graded on request) incl. tailgate - Scraper floor with 32 slats Isdpfew Swpfsx Ah Hebd - Complete remote radio control - Preparation for travel drive - Acoustic start-up warning - Paint finish: RAL2011 deep orange Optional Equipment: - Hydraulic travel drive - Drawbar extension 400 mm - Fuel tank 600 l - Additional hydraulic connection 20 l/min - Flail tip C1 bear paw with tungsten carbide - Fine shredding basket - Impact plate with strike bar - Rear conveyor 4 m - Separate drive for feed roller/scraper floor "Twin Drive" - Reinforcement plates in the loading hopper

Condition: excellent (used), Year of construction: 2025, operating hours: 50,000 h, functionality: fully functional, overall weight: 17,000 kg, rotor diameter: 640 mm, rotor length: 2,500 mm, power: 247 kW (335.83 HP), rotational speed (max.): 400 rpm, Shred & Granulation Line Ibedpsxg Thlsfx Ah Hjd - Approximate Operating hours 50,000 hours per machine. Very good condition. - Average output is 3.5 tonnes per hour - Used exclusively for clean plastics such as PP and HDPE - Includes zig zags, double bagging station - Includes chiller, control panel, and 2x units of Eriez metal removal system at bagging stations - Immaculately maintained and regularly serviced Zerma Granulator (2018) - 1600-800-3 ×7 model. 185KW. With double bagging station, zig zag and conveyor with built-in metal detection (Model K1058). Vecoplan Shredder (2009) - AZ 2500 ECO Drive. 247KW - Shredder with pre-feed conveyor and adjoining conveyor with overband ferrous removal system. Includes spare cutters and counter knife

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Iedsd Hkqhspfx Ah Hebd Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: excellent (used), Year of construction: 2014, operating hours: 917 h, functionality: fully functional, power: 250 kW (339.91 HP), overall weight: 19,000 kg, Doppstadt DH 812 / Wood Chipper / Shredder / Mulcher • Manufacturer: Doppstadt • Model: DH812 • Year of manufacture: 2014 • Operating hours: 917 hrs • Wood chipper • Power output: 250–370 kW • Infeed height: 95 cm • Infeed width: 1.2 m • Log diameter softwood: 60 cm • Log diameter hardwood: 48 cm • Drive power: 220 to 360 kW • Chipping rotor width: 1.2 meters • Chipping rotor diameter: 1 meter • Loading height: approx. 1.4 meters Iodpjxqfl Rofx Ah Hobd • Feed opening width: approx. 2 meters • Variable infeed speed • Easy screen basket change for quality wood chips from P16 to P100 • Hydraulic pressing device for infeed roller • LED lighting package: 1x discharge chute, 2x infeed, 1x internal lighting • Camera on discharge chute • Winter tires 600/50 R22.5 • Rear cross member with 18 tonne D=40 mm ball-type towing jaw, 12 volt socket, dual-circuit braking system, 4 hydraulic connections • Chipping blades: 6 pcs • Counter blades: 6 pcs • Chipping rotor speed: 400 to 640 rpm • Gross weight: 19,000 kg • German machine • Ready for immediate use _____ Crane: Palfinger Epsilon M70F • Manufacturer: Palfinger • Model: Epsilon M70F • Year of manufacture: 2020 • Lifting capacity: 1,280 kg at 5 meters; 890 kg at 7 meters; 660 kg at 9 meters; 540 kg at 10 meters • Maximum lifting capacity: 2,160 kg at 3 meters • Grapple: Cranab CE 280 • This offer is non-binding and subject to change. - Prior sale reserved. - Errors and/or typos excepted. - Sale subject to our general terms and conditions (GTC).

Condition: ready for operation (used), A single-shaft shredder Lindner is available. Power: 160kW, working width: 2525mm, rotor speed: 100rpm, knife system: Mono-Fix, hopper opening X/Y: 3200mm/2400mm, volume: 5.6m³, filling height: 2600mm. Machine dimensions X/Y/Z: approx. 4750mm/2500mm/3400mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible. Ijdpfx Ahoxvruij Hobd

Condition: good (used), Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Equipment: Basic package AK 315: - Central axle trailer chassis with 2 axles, 80 km/h road approval - Braking system incl. EBS and lighting according to EC directive - Tires: 385/65 R22.5 - 50 mm EC towing eye incl. slip-on shoe - Hydraulically adjustable support leg - Splash protection (inner and side mudguards) - Permissible total weight 16,000 kg - MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emission standard - Load-dependent control of material feed incl. automatic reversing of drag floor Isdpfx Ahowvub Io Hsbd - Hydraulically foldable green waste screen basket with tailgate - Impact plate with teeth - Fuel tank 300 liters - Infeed roller: length 1,420 mm, diameter 510 mm, with attached tooth segments - Two-row flail drum with 16 freely swinging cast steel flail holders and replaceable flail tips and 28 fixed ripping teeth - Standard: "Streusel plus" flail tip - Centrally arranged lubrication strips - Electric pump for actuation of cylinder functions (e.g. lifting/lowering support leg and opening/closing tail basket, folding/unfolding rear conveyor, releasing travel drive) when the engine is off - 24-V electrical control system - Separate control box at the rear of the machine - Drag floor with 29 slats - Chain drive for infeed roller and drag floor - Extended radio remote control with 2 foot switches - Acoustic start-up warning - Rear conveyor 6 m, 1,500 mm wide with anti-magnetic center section - Reinforcement plates (Hardox) on the feed hopper sides (loading edge) on both sides - Travel drive preparation - Fire extinguisher - Doppstadt telematics system - Paint finish: RAL2011 deep orange Optional equipment: - Hydraulic travel drive - Extended radio remote control with foot switch - Flail tips "Bear Claw" - Fine shredding basket - Water spraying system - Lighting package: engine compartment and rear conveyor

Year of construction: 2023, condition: new, Machine in preproduction machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net Ijdpfx Ahedv Eu Hj Hobd - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, The ideal machine for shredding both hardwood and softwood. Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control: PLC Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation as per choice (12 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,100 kg Dimensions (LxWxH): approx. 1805 x 1118 x 1650 mm Color: blue / grey The following options are available at extra cost: - Raise the shredder by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control unit for conveyor belt and overband magnet + €2,750 net (start and stop synchronised with the shredder) Requirements for the raw material: - The moisture content (absolutely dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. result in increased wear. We are pleased to offer you a free test with your material. You are invited to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight carrier and we will document the test with photos and videos. Ibedpfowzarcox Ah Hed

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm Iodod N Dn Depfx Ah Hjbd weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc