Used Short Screwdriver for sale (4,393)

Year of construction: 2016, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659480, From our demonstration tool inventory, tested and fully functional: Predpfx Aov Ipt Rsa Ejf Desoutter low-voltage screwdriver SLBN120-L550-S4Q switch-off with lever start Idle speed: 410 / 550 min-1 Torque range: 4.0 to 12 Nm Output: 1/4" Length: 301 mm Weight without battery: 1.25 kg Other tools for industrial production and maintenance on request.

Condition: used, power: 78 kW (106.05 HP), first registration: 01/2023, fuel type: gasoline, color: red, gearing type: mechanical, emission class: euro6, loading space volume: 1 m³, loading space length: 2,200 mm, loading space width: 1,680 mm, loading space height: 300 mm, Cargo compartment (W W H): 2,200 mm x 1,680 mm x 300 mm, Cargo compartment volume: 1 m³, Seats Fabric Pjdpepac Ausfx Aa Ejrf

Condition: used, Short and quick change inserts for short Prjdedbmxmspfx Aa Eef

Condition: good (used), Table size: 710x450mm Prjdpfov S Ugdex Aa Ejf Good condition!

Year of construction: 1990, condition: good (used), Short/ Nest Line Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo Prodpfxsn Arzks Aa Ejf 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult 13. El Cabinet 14. Automatic packing Unit

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,200 mm, total width: 3,400 mm, total length: 2,400 mm, overall weight: 4,500 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, Technical characteristics: CAPACITY: up to 1200 boxes per hour PULLER SPEED: up to 3m/s INSTALLED POWER: 23 kW CARDBOARD TYPE: single, double and triple wall up to 14mm and 1400GSM in standard option and HD cardboard over 2000GSM per request. MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 300mm width x 650mm length DISTANCE BETWEEN SLOTTING KNIVES: 50mm – 2200mm (500mm segmented slotting knives) WIDTH OF SLOT: 8mm Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Pedpfefivfyex Aa Esrf Circular blades x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Printing unit x 1 - The printing unit is capable of outputting single color prints of up to 1000mm of width and 870mm in length, making it the perfect choice for standard transportation box markings. The imprint can be placed anywhere on the box, including creased areas - positioned automatically. Gluing module unit x 1 -.. The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models in memory. Warranty 12 months, provided training and support for services and parts.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Predpfx Asv Tbh Roa Eef Min/Max torque range: 50 to 240 ft.lbs Working torque: 65 to 190 ft.lbs Drive: 3/4" square drive Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Condition: new, machine/vehicle number: Ripper Arm, Layout: Crusher Prjdpfx Aopa Rqkea Eef Attachment suited for: Construction machines Selling price: € 50, US$ 53,56 Advantages of using Ripper Arm 1) The shorter boom & arm make it more powerful on breaking. 2) The increased weight of boom & arm is good to keep balance on self weight of machine. 3) Much higher working efficiency, almost 6-10 times than hydraulic breaker. 4) It helps to reduce blasting work, much safer and good for environmental protection. 5) Widely used for mining, road, housing and frozen soil construction and other projects.

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: Predpfx Aeh Dxgasa Eef - capacity 400 kg / h - Delivery conveyor - mixer - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch Predpfev Imyusx Aa Esf with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Year of construction: 2014, operating hours: 7 h, condition: used, machine/vehicle number: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with connection cable fully functional without any additional accessories Item.No.: 6151654560 suitable for Desoutter CVIC II - L2 and CVIC II - H2 - screw control Pjdpfxjvxu Dvj Aa Ejrf Output: Hex 1/4F" Torque: Min.: 1.0 Nm Max.: 4.0 Nm Idle speed: 2000 rpm Weight: 0.6kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Pjdpfx Aaov Tbpzj Ejrf Other tools for industrial manufacturing and maintenance on request.

Condition: good (used), functionality: fully functional, Year of construction: 2018, TRUMPF TruMicro 7060 (FK03) – Ultra-Short Pulse Industrial Laser / Precision Laser System Manufacturer: TRUMPF Laser GmbH Location: Schramberg, Germany Model: TruMicro 7060 (FK03) Equipment No.: L1570M0181 Year of Manufacture: October 2018 Condition: Used, well maintained Description The TRUMPF TruMicro 7060 (FK03) is an industrial laser system designed for high-precision applications. Manufactured in Germany by TRUMPF, this device features a premium, robust construction with IP54 protection rating. Thanks to its high electrical power connectivity and highly stable 3-phase supply, this type of laser is suitable for demanding industrial manufacturing processes where high accuracy and reliability are critical. Technical Data (according to nameplate) Electrical Data Psdpfx Ajxyk I Nsa Eorf Power supply: 380 V -10% … 460 V +10%, 3AC + PE Frequency: 50 – 60 Hz Power consumption: 6 kW / 6.3 kVA Current: 9 A / 400 V Protection & Standards IP rating: IP54 Icn / SCCR: 5 kA CE certified Compliance: 21 CFR Chapter 1, Subchapter J (Laser Safety) Mechanical Data Weight: 580 / 510 kg (two values listed on nameplate) Additional Information Document number: 20-09-05-A10 Manufacturing date: October 2018 Condition & Notes Original nameplate fully intact Clean external condition

Year of construction: 2020, condition: new, machine/vehicle number: 6159326350, We are dissolving part of our demonstration tool inventory: Desoutter ESP1 control for SLBN low-voltage screwdrivers Year of manufacture: 11/2020 Article no.: 6159326350 new, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 Prjdpjv Iqcgefx Aa Ejf -SLBN010 -SLBN012 -SLBN020 The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100V or 240V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Condition: used, Zucchelli 9 Screwdrivers in stock to store or use for spare parts. Pjdpfsr H Tk Ijx Aa Eorf

Year of construction: 2016, operating hours: 3 h, condition: excellent (used), machine/vehicle number: 6159327080, We are dissolving part of our demonstration tool inventory: Desoutter extended control ESP2-A for SLBN low-voltage screwdrivers Year of manufacture: 09/2016 Article no.: 6159327080 little used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 -SLBN010 -SLBN012 -SLBN020 -SLBN030 -SLBN050 -SLBN090 -SLBN120 The ESP2A is designed to optimize the performance of Desoutter SLBN screwdrivers, reduce your energy consumption and offer up to five program settings and PLC integration, including remote start and tool activation. In addition to the OK/NIO and group IO reporting, the ESP2A offers a wide range of rundown options including pre-run reversal, slow start, tightening phase and post-run reversal. Benefits Prsdpfjv Ipnzox Aa Ejf Two tools can be connected to one ESP2A, offering unmatched flexibility and reduced installation costs. Improved production integration and traceability functionality to improve your product quality. Compatible with over 15 tools for a standardized platform, faster readjustments and lower total cost of ownership. Five cycles with 3 possible phases each offer versatility no matter where your production is headed. Multiple preset tightening strategies to replace multiple tools with a single one for a quick return on investment. Available in both lever-start and push-start tools from 0.07 N.m to 12 N.m with a full range of accessories for all your tightening needs. Fully compatible with a range of accessories to optimize your tightening process and ensure continued quality. Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2018, condition: new, machine/vehicle number: 6159327070, We are dissolving part of our demonstration tool inventory: Desoutter ESP1-HT PLUS control for SLBN low-voltage screwdrivers Year of manufacture: 04/2018 Article no.: 6159327070 used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN090 -SLBN120 ESP1-HT PLUS The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Pedpfx Aev Iqfzea Ejrf Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100 V or 240 V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Condition: excellent (used), Year of construction: 2017, Ref:11050 . 2017 Foliant Vega 400A Laminator. New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs. Equipped with: Integrated deep pile vacuum feeder and a high-speed bump separator Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system. Pneumatic high-pressure system (with integrated compressor inside machine frame) Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too. The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm). Feeder: Equipped with a rising pile front separation stream feeder and with a vacuum belt head. Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum. Overlaps are controlled, in an ‘in-run’ mode. Accuracy is +/- 2 mm under-lap (in a constant speed). Fitted with a lifting plate and its capacity is a 28 cm pile of paper. Laminator: Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4). The minimum sheet size is 20 x 30 cm. Compressor is integrated inside the machine frame as standard. Laminating unit is equipped with an adjustable twin decurl unit: • With a decurl blade for offset printed sheets decurling • With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks). Roll of a film is mounted on a quick-changed shaft with a film tension control breaker. Prjdpfx Asx Nftnoa Eef Shaft capacity is up to 3000 m of the 24 - 42 microns film. Film holder unit is equipped with an in-line trim slitter and a perforating wheel. 2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface. Pressure is pneumatically adjustable. Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. Warming up time is shorter than 10 minutes. Controlled by an interactive, easy understandable icon based touch screen System includes many automation items for an easy control of the machine and a reliable lamination. Separator: Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. Separated sheets are delivered into a vibrating jogger Laminating Films: BOPP films (24 – 42 microns) Nylon films (24 - 35 microns) Specification: Maximal Speed: single side 18 m/min. Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm Paper Weight: 115–500 g/m² Main Roller Pressure System: Pneumatic Minimal Sheets Size (w×l): 20×30 cm Maximal Sheets Size (w×l): 38x66 cm Maximal Performance: 2100 B3 / hod. Temperature Control: 80–140 °C, Warming Up Time 8 min Power Supply: 230 V AC, 50-60 Hz Power: 3150 W Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Psdex N Nlzjpfx Aa Eerf

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Pjdpox Dnilefx Aa Eorf Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: Sinar series DC K 2.5kW Laser source, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 4,500mm Condition: Very Good Hours: 22,500hrs Available February or March 2026 This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight Prodpfx Aajx Ddago Eef System footprint (L=6500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2005, Daewoo Puma TT 2000SY Twin Turret Turning Centre with Fanuc 18i-TB CNC Control With Hydrafeed Multifeed MX-1B Short Magazine Automatic Bar Feed. Swing Over Bed 800mm. Swing Over Saddle 620mm. Max Turning on Upper Turret Ø390mm. Max Turning on Lower Turret Ø300mm. Max Working Length 350mm. Max Bar Ø65mm. 'X1' Axis Travel 255mm, 'X2' Axis Travel 190mm. 'Z1' Axis Travel 800mm, 'Z2' Axis Travel 900mm. 'Y' Axis Travel 120mm (+ or - 60mm). 'B' Axis 810mm. 'C' Axis 360°. (1) Kitagawa BB08 Power Chuck Ø210. (1) CRS66 Power Collet Chuck, Gripping Range 4mm-66mm. Main Spindle Nose A2 No.6 with Ø76mm Through Hole & Ø66mm Bore of Draw Tube & Max Speed of 5,000RPM. Twin Turret each with (12) Tool Stations. Tool Size 25mm x 25mm, Boring Bar Size Ø40mm & Spindle Speeds 4,000RPM. LNS Turbo 62878680E Swarf Conveyor (2005). Puma S/No. PT 20SY0047. Hydrafeed Multifeed MX-1B Automatic Bar Feed. Approx Ø3 - Ø80mm x 1,250mm Long Bar Range with Hydrafeed Controller, S/No. 202618. Psdpex H Thbefx Aa Eerf Includes Probe Arm, Signal Tower, (2) Machine Lights & (2) KF-101P Foot Switches. Dimensions of Turning Centre Approx 4,100mm x 2,300mm x 2,600mm High, Weight Approx 11,600kg. Please note: Filtermist FX 4000 XCEL 2 Oil Mist Filter Extraction is not included with the machine.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ELB0109, cooling capacity: 720 kW (978.93 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,500 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 15 bar, volume flow: 65 m³/h, total width: 406,000 mm, total length: 225,000 mm, total height: 247,000 mm, noise level: 72 dB, input frequency: 50 Hz, Trane Air-Cooled Chiller GVUF205 X XLN – 2018 Manufacturer: Trane (France) Model: GVAF 205 X XLN Year of Manufacture: 2018 Serial Number: ELB0109 Type of Cooling: Air-cooled (screw chiller) Cooling Capacity: ~720 kW, 620kcal/h Refrigerant: R134a (2 independent circuits – 75/70 kg, GWP 1430) Power Supply: 400 V / 50 Hz / 3-phase Maximum Current (A max): 506 A Starting Current: 596 A Short-Circuit Protection (ICC-LRA): 35 kA Design Pressure: Refrigerant circuit: LP 15 bar / HP 18.8 bar Water side: 10 bar Operating Conditions: Ambient Temperature Range: –10 °C … +46 °C (optional Low Ambient Kit: up to –25 °C) Water Flow Rate: ~65 – 108 m³/h Evaporator water content: ~120 L Predjw R Ualjpfx Aa Eef Dimensions & Weight: Overall Weight: 4 414 kg Dimensions (L × W × H): 4 060 × 2 250 × 2 470 mm Key Features: High-efficiency air-cooled screw chiller. Two independent refrigerant circuits ensure reliability. Uses R134a refrigerant, environmentally compliant. Extra-Low-Noise (XLN) version – optimized for reduced sound emissions. Suitable for industrial and commercial cooling applications. Condition: ✔️ Good working condition ✔️ Regularly maintained ✔️ Immediately available

Condition: good (used), mileage: 259,951 km, power: 184 kW (250.17 HP), first registration: 02/2015, fuel type: diesel, tire size: 245/70R19,5, axle configuration: 4x2, wheelbase: 4,810 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 8,800 mm, total width: 2,550 mm, total height: 2,740 mm, loading space length: 6,120 mm, loading space width: 2,490 mm, loading space height: 600 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Digital tachograph - Trip recorder (control device) - Fixed fifth wheel - Short cab - PTO (power take-off) - Pump = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 6,700 kg, Gross weight: 12,000 kg, Total tank capacity: 180 litres, Fifth wheel: Fixed, Number of differentials locks: 1, Suspension type: Full air, Cab type: Short cab, Cruise control, Trip recorder (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Colour: White, Heated mirrors, Reversing camera, Lighting: Halogen lamp, Seat heating, Bluetooth, Blind spot sensor, Engine output: 184 kW (247 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 6, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, Pump, Seating arrangement: 1+2, Seat covering: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Fassi F38, Crane year of manufacture: 2015, Crane lifting capacity: 3800, Max. load: 485 kg at 6.05 m, Number of support legs: 2, Control position: right-hand side operation, Crane position: behind the cab, Sliding mechanism: 2, Outriggers, Hydraulic auxiliary connection: none, Load hook, FASSI F38A.0.22 / WITH REMOTE / 2X HYDRAULIC / EURO 6 = Further Information = Transmission Transmission: ZF, 6 gears, automatic Axle configuration Tyre size: 245/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tyre tread left: 12 mm; Tyre tread right: 10 mm; Suspension: Leaf spring Axle 2: Twin wheels; Tyre tread left inner: 9 mm; Tyre tread left outer: 10 mm; Tyre tread right inner: 11 mm; Tyre tread right outer: 7 mm; Suspension: Air suspension Weights Podpfsx Rbayex Aa Esrf Unladen weight: 6,700 kg Payload: 5,300 kg Gross vehicle weight: 12,000 kg Functional Crane: Fassi F38, year 2015, behind the cab Loading platform height: 104 cm Pump: Yes Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Easy! • Large, fast-changing stock • Recognisable quality • Good prices • Fair, trustworthy dealing • We speak many languages • We understand our customers • Support with import and transport • (Export) registration numbers arranged quickly • Professional technical services • The security of “recognisable quality” • And much more… Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Year of construction: 2003, condition: used, functionality: fully functional, D&K Acculam 2760 Laminator with Feeder, Exit tray and Transformer. Recently removed from a printshop. Prodpfxsx Nawne Aa Eof Machine has been in full working order and producing live jobs. Machine is sold Ex works. No cutting unit is included. Machine is located in my warehouse in Tadley/Reading UK. Video in production on request. The D&K System 2760 (often referred to as the Acculam series) is a fully automated one-sided lamination system designed for high-volume, short-run digital and offset printing. It typically includes an automatic feeder, a laminator with curl management, and a flying knife separator. Technical Specifications Max Lamination Speed Up to 60 fpm (18 meters per minute) Max Sheet Size 26" x 30" (standard) or up to 28" x 40" (B1 version) Min Sheet Size 8.5" x 11" (21.6 cm x 27.9 cm) Paper Weight Range 80 lb. Text to 18 pt. Board (approx. 115–350+ gsm) Temperature Range 180°F – 300°F (70°C – 140°C) Warm-up Time Approximately 20 minutes Electrical Requirements 230 Volt, 30 Amp, Single Phase Air Requirements 6 cfm (some models may require up to 8 cfm) System Dimensions 5' W x 14' L x 5' H Key Features Feeding System: Utilizes a state-of-the-art automatic suction feeder and belt table to ensure accurate sheet registration. Adhesion Technology: The System 2760 DN variant features two sets of heated nip rollers specifically for better adhesion to difficult digital prints like Xerox iGen or HP Indigo. Curl Management: A patented decurling system ensures sheets lay flat even when using thin paper or thick films like polyester and nylon. Versatility: Supports both thermal (heat) and pressure-sensitive (cold) lamination with optional release liner take-up for PSA products.