Used Sheet Metal Roller for sale (42,952)

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Lodpfxjinwwze Aalohd Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: new, Year of construction: 2026, For sale is a new guillotine shear directly from the manufacturer Prod-Masz. Visit our website to see our other products. Guillotine shears manually 1500 / 1.5mm the working length: 1500mm to sheet steel up to 1.2mm, Lhjdpfxocvqnye Aaljd Weight: 400 kg We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: new, Timesavers Series 12-300-WRBW Vacuum table Station 1: Pre-grinding, removal of burrs and splashes Station 2: Edge rounding using rotating deburring brush Lhedpfsymlguex Aalod Station 3: Surface finishing with Scotchband

Condition: excellent (used), Series 12-225-WRD 1st station sanding belt for removing burrs and laser spatter Ljdpfxoymlfdo Aalehd 2nd station disc for light edge rounding Pass-through width 225 mm incl. TEKA extraction system

Condition: used, Year of construction: 2007, functionality: limited functionality, Used Weber sheet metal deburring machine with extraction system Manufacturer: Weber Model: BLC 1P 1100 Year of manufacture: 2007 1 x grinding unit + 1 x brushing unit Including extraction system with ductwork Lsdpfxoyi H E De Aalshd The height adjustment of the brushing unit occasionally malfunctions or resets itself. The height control (encoder) should be inspected. The touchscreen sometimes responds poorly. For all further details, please contact us by phone.

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, Counterweight in large protective housing Lhjdpfx Aaeynhudslod

Condition: new, Year of construction: 2026, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops Ledpfx Aajc Nxwhslohd - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We are looking forward to your contact!

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm Ljdpfx Aeynmw Rsalshd 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke Lhsdjynmwkjpfx Aalsd mm 15 Rotation motor power kW 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.

Condition: like new (used), functionality: fully functional, degree of automation: manual, actuation type: manual, working width: 1,000 mm, Load capacity: 6 t Coil inner diameter: 450-550 mm Coil outer diameter: 1000 mm Stand weight: 150 kg Lodpfx Ajyww Hpjaljhd The device must be manually inserted into the inside of the metal coil; the four support arms can then be tensioned in place using the winding handle. Strong tensioning is aided by the structural design and a thrust bearing mounted behind the clamping nut. With the device fixed in place, the metal coil can be lifted to the decoiler stand by crane or forklift. The sheet metal can be continuously unwound from the stand with a suitable pulling machine, while overrun is prevented by an adjustable disc brake. Decoilers are also available new at a price of 1,440,000 HUF + VAT. There are 3 units for sale, price: 700,000 HUF / unit (1770 EUR) + VAT.

Condition: new, Year of construction: 2026, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Lodscrcgqopfx Aalohd Marking template FREE :) Price: EUR 6,600.00 Delivery costs: PLEASE ASK Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: good (used), Technical Specifications: Working length: 6040 mm Bending capacity (steel): 2.0 mm NC control Bending angle adjustment: 0 – 180° Upper beam opening: 500 mm Lsdpfx Aajyiaucolohd Dimensions (L x W x H): approx. 8300 x 1350 x 2000 mm Weight: approx. 11 t Accessories: various segmented tools rear outfeed table The seller assumes no liability for typing or data transmission errors. The machine is in a condition commensurate with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) Lhedpfx Aajc Ikrqjled the maximum working length 2140 mm the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length a table for supporting the rear plate gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: new, Year of construction: 2026, Heavy-duty hydraulic guillotine shear for universal use for trade and industry. With the hydraulic table shear GLT from Prod-Masz you can make the perfect cut with every job. - The extending table makes it easier to carry large-sized metal sheets on the table - Support table with graduation - robust and compact steel construction - high quality, durable steel knives - extremely stable and heavy cast iron construction - Ground and hardened guillotine shear knives - Back gauge system with Scala - CE approved quality - Declaration of conformity - for steel plates up to 1.2mm Ledec I T E Topfx Aaljhd - Open design suitable for endless cuts - Max. Working width: 3000 mm - Motor power 2.2 kW - HL 46 oil - pressure force 4t - Operating pressure 120-150 bar - has hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight about 1000 kg We are looking forward to your contact! We issue the invoices with 0% (intra-Community delivery)

Year of construction: 2020, condition: good (used), Remmert LaserFLEX | Fully Automatic Loading and Unloading – Used - : Price ex location: now only €119,000 (net), previously €145,000 (net) plus dismantling, etc.! Manufacturer: Remmert Model: LaserFlex Year of manufacture: approx. 2020 Sheet format: 3015 Load capacity: 1,000 kg 220 kg/m² Maximum sheet dimensions: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (storage system not included in the sale) Original price: €250,000 (net) Manufacturer description: Equipped with two automation units – a loading unit and an unloading unit – the LaserFLEX allows for the decoupling of loading and unloading processes in laser cutting systems. After cutting, a fork unit lifts the processed metal sheet from the change table, while simultaneously a new sheet is transported from the connected storage system via a vacuum unit. As soon as the sheet is positioned next to the laser machine, the system is loaded with the workpiece by the unloader. This entire process takes just one minute. With LaserFLEX, the downtime of integrated laser cutting systems is virtually eliminated, even high-speed laser processing is optimally supported. Key features: • Changeover times of approx. one minute (with 3015 format) • Highly automated production processes • Separate loading and unloading operations for the laser cutting machine • Manufacturer-independent integration of laser systems • Flexible storage options with tower or large-scale storage systems • Reduced downtime of the processing machine • Connection of multiple laser systems in a chained layout • Integration into existing warehouse and production environments • Intuitive, graphical touch operation with visual status management • Modern industrial design Fast, flexible solution for the automation of laser systems Increased productivity in laser processing Fastest sheet changeover time on the market Seamless integration into existing production environments Handling of any sheet formats Effective supply and removal for multiple laser systems Intuitive, graphical touch operation with visual status management Lsdpfxswga E Ts Aaljhd Innovative, modern industrial design Condition: Good Available: Immediately Location: 46419 Isselburg

Condition: excellent (used), Year of construction: 2026, Timesavers Series 10 Manuel Ginder The machine is a demonstration machine which was used occasionally for demonstrations. Easy to operate and pleasant to ride. Rubber carpet with good grip and additional vacuum field for small parts. Speed infinitely variable. Ledpfxofhb N So Aalehd The machine is in our warehouse and can be viewed at any time under power, tested and accepted.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 5 processing stations, Production width: 230 - 1250 mm, Production length: 500 - 2400 mm, Material thickness: 0.63 - 1.0 (1.5) mm, Lhsdpfx Aaox Thqweljd Material type: Steel 1203, bright, Mains voltage: 400 V 50 Hz, Power: 150 kW, Hydraulic pressure: max. 150 bar, Air pressure: max. 10 bar. The control system has been renewed by SIEMENS.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,950 h, Model: Timesavers Grindingmaster 81-Series-2100-W Year: 2018 Operating Hours: 1,950 h Configuration: High-performance wide belt grinding with fixed table and Siemens control. Capacity & Working Dimensions Min. Dimensions (LxWxH): 600 x 600 x 10 mm. Max. Dimensions (LxWxH): 1680 x 1830 x 30 mm. Max. Workpiece Weight: 250 kg. Machine Opening: 1 - 100 mm. Grinding Unit (Head 1) Contact Roller: Ø 280 mm, 70° Shore Ni 37 45. Main Motor: 90 kW. Belt Speed: 8 - 22 m/sec (frequency controlled). Lhedpfx Asxxznkealsd Rotation: 2 directions. Belt Dimensions: Length 2620 mm x Width 2130 mm. Oscillation: Electronic, adjustable (2130, 1600, or 1380 mm).

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Lhjdpfx Aasx Sz D Iolod Measurements height 1300 mm This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Lhsdpfxoya Iaqe Aalod Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: new, Year of construction: 2025, Sheet metal folder RED 2200/0.8 + wheels Lsdpfxscqu Dge Aalehd Bending machine with side cutouts for bending from up and down. Thanks to it, you will make your window sill ready. In the machine's construction there is a place for bent processing at a height of 6 cm up and down. It is a modern sheet metal folding machine that bends sheet metal from three sides. max. working length: 2200 mm bending: 0.8 mm steel sheet 1.2 mm (aluminum, copper, zinc) bending beam: 15 mm bending angle max. 150 degrees max. opening: 80 mm weight: ca. 250 kg

Condition: new, Year of construction: 2026, PROD-MASZ 2.2 m Electric Sheet Metal Bending Machine for 2 mm Aluminum Sheets ✨ For Sale: Electric sheet metal bending machine from the renowned company PROD-MASZ. Specifications: ✅ Working Length: 2.2 m ✅ Maximum Sheet Thickness: 2.0 mm (Aluminum) ✅ Bending Angle: 15° ✅ Bending Beam: 18 mm ✅ Drive: Electric – simple and convenient operation ✅ Solid and durable construction for precise bending ✅ Machine is fully functional and ready for immediate use ✅ New, from current production ✅ 3-Phase Control 360V ✨ Ideal for sheet metal fabrication shops, roofing companies, and sheet metal processing. ✨ Professional, reliable, and industry-recognized equipment. ✨ Thanks to the electric drive, work becomes significantly easier and faster, leading to greater efficiency and time savings. ✨ Additional equipment: ✅ Roller shear 0.8mm - €350 ✅ Roller shear 1.2mm - €500 Lsdpfecv S A Eex Aalshd ✅ Hand folding machine €75 ✅ Magnetic setting aid up to 36cm (2 pcs) €75 ✅ Magnetic setting aid up to 65cm (2 pieces): €150 ✅ Rotary finger stop 65cm: additional €1250 ✨ Machine is available ✨ Delivery possible every Monday/Tuesday ✨ Delivery costs: € please ask We look forward to hearing from you! -> We issue invoices

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 15257, We are currently offering a "Thalmann" double folding machine in excellent condition for sale. Exact specification: THALMANN - Twin Bending Folding Machine - Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm2) DFT system The machine is in very good technical and visual condition and is fully operational. Reason for sale: The Thalmann is being sold due to an investment in a new EVOBEND double folding machine. The unit runs perfectly and is in use daily. Technical details (Status: 12.03.2026): - Control operating hours: 5,302.1 - Pump operating hours: 853.9 - Number of cutting cycles: 2,947 - Total sheets processed: 11,800 Machine data: TD 150 – 6.4 m S5 with DFT® technology - Working length: 6,400 mm - Insertion depth: 1,250 mm - Bending beam width: 10 mm + 10 mm additional rail - Max. bending capacity: Steel sheet (S): 1.5 mm (Re 275 N/mm2) / Aluminium: 2.0 mm / Stainless steel: 1.0 mm - 180° folding capacity: 50% of bending capacity - Max. bending angle: 143° (1.0 mm: 135° / 1.5 mm: 130°) - Bending accuracy: +/- 0.5° (with crowning system) - Number of grippers / gripper travel: 4 units, +1, +1 / 15 mm - 1,250 mm - Max. opening of grippers: 35 mm - Number of backgauge fingers / travel: 4 units / 5 mm - 1,150 mm - Backgauge tolerance: +/- 0.1 mm per set, repeat accuracy - Electrical connection: 400 V / 50 Hz / 3-phase + PE - Rated current / Protection / Pump: 32 A / 63 A / 22 kW, 75 ccm - Dimensions: 8,050 x 2,250 x 2,100 mm - Weight: approx. 10,000 kg - Compressed air supply: 6 bar (Incl. control unit, total 6 servo grippers, 6 backgauge fingers) Included additional equipment and features: - Free-running cutting unit/"rotary shear": 1.5 mm steel: 1 pc. Lsdpfxsypxx As Aalohd - Curved lower clamping jaw, ratio H x D = 1:2: 1 pc. - Conical depth stop with 2-zone function: 1 pc. - Additional gripper/backgauge unit: 1 pc. - Clamping jaws made of high-strength HARDOX steel: 1 pc. - Hydraulic material thickness adjustment: 1 pc. - Automatic sheet loading and support table: 1 pc. - M-Guard remote service support (instead of TeamViewer): 1 pc. - LED bending line illumination with RGB color selection: 1 pc. The machine is also designed to allow for retrofitting of the "turnover unit" (see information on the THALMANN AG website, as stated by the previous owner—no warranty).

Condition: ready for operation (used), Year of construction: 1985, control type: manual, working width: 4,080 mm, sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), overall weight: 16,500 kg, total length: 5,300 mm, total width: 2,500 mm, total height: 2,300 mm, Cutting length 4080 mm, cutting capacity 10 mm, motor 22 KW, working high 800 mm, back gauge 1000 mm motorised, cutting line, footpedal, 4 frontarms, maschine can be lower down by 200 mm, dimension 5300x2500x2300 mm, ca. 16000 kgs Lhjdpfxehl Im Ne Aaljd

Condition: new, Year of construction: 2026, ZGH type machines are a versatile solution for sheet metal processing. They can be used universally for demanding craft operations. To create this versatile solution for all applications up to 1.2 mm sheet steel, PPHU Prod Masz drew on its years of experience in mechanical engineering. Lhodpfxjc I Tn He Aaljd The ZGH offers the optimum in precision, durability and stability. This model is equipped with a control panel. the maximum working length 3140 mm the max. thickness of the sheet for 1.2 mm (steel) the weight of the hand machine is around 2100 kilograms the lifting of the upper beam in three layers bending beam: 30 mm the max. clear width between the beams 100 mm bending angle: 150 degrees delivery to Germany 750 euros delivery date: up to 2 weeks roller shears optional for an additional charge rear stops with scale optional for an additional charge we look forward to hearing from you!