Used Sharpening Hob for sale (859)

Condition: used, Year of construction: 2008, grinding diameter 160 mm dist. between centers 645 mm centre height 320 mm Nljdoxxbzdspfx Ac Aog control SIN 840D turning speeds 27.000 U/min x-axis 550 mm y-axis 235 mm z-axis 300 mm A - axis 360 ° C-axis 270 ° total power requirement 20 kW

Condition: ready for operation (used), Year of construction: 1986, operating hours: 1,200 h, functionality: fully functional, total height: 1,520 mm, total length: 2,580 mm, total width: 1,440 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,500 rpm, feed length X-axis: 2,120 mm, feed length Y-axis: 250 mm, feed length Z-axis: 150 mm, type of input current: AC, grinding wheel diameter: 250 mm, overall weight: 3,730 kg, grinding length: 280 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 2,600 rpm, center height in crank: 115 mm, center height: 115 mm, collet bore: 55 mm, grinding spindle speed: 2,600 rpm, feed rate X-axis: 12 m/min, pivoting range: 45 °, travel distance X-axis: 2,120 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 150 mm, center width: 280 mm, grinding spindle motor power: 3,000 W, table length: 2,800 mm, table width: 250 mm, power: 6.5 kW (8.84 HP), height adjustment type: mechanical, workpiece diameter (max.): 235 mm, grinding diameter: 250 mm, input frequency: 50 Hz, disc diameter: 250 mm, input voltage: 380 V, space requirement width: 1,440 mm, space requirement length: 2,580 mm, space requirement height: 1,520 mm, grinding wheel speed: 2,100 rpm, distance table to spindle center: 362 mm, tool diameter: 235 mm, workpiece length between centers: 280 mm, distance between centers: 280 mm, Hob Sharpening Machine 33C (ZZS) 3A662 (Gear hobbing cutter grinding machine) The 33C (ZZS) model 3A662 is a specialized hob sharpening machine designed for precise sharpening and regrinding of gear hobs and gear cutting tools. Manufactured by 33C (Soviet Union), this machine is intended for industrial tool rooms and gear manufacturing facilities requiring reliable accuracy and repeatable grinding quality. The machine is suitable for sharpening hobs with a maximum diameter of 235 mm and a maximum length of 280 mm. It supports hobs with 4 to 30 flutes and allows grinding of straight and helical flutes with a helix angle range from 0° to 45°, covering a wide range of gear cutting applications. The grinding spindle is designed for grinding wheels with diameters from 200 to 250 mm. Spindle speed is adjusted via step pulleys and offers four speed stages: 1500 / 1900 / 2100 / 2600 rpm, ensuring flexibility for different tool sizes and materials. The machine is equipped with a dividing mechanism and supplied with a complete set of change gears, allowing accurate indexing during the sharpening process. A hydraulically driven table provides smooth longitudinal movement and stable grinding conditions. With overall dimensions of approximately 2580 × 1440 × 1520 mm and a machine weight of about 3730 kg, the 3A662 features a rigid and robust construction, providing excellent vibration damping and long-term operational stability. The machine operates on three-phase AC power (380 V / 50 Hz) and is supplied with original factory documentation. Key Features: Nsdpfx Acox Nprbj Aslg *Specialized hob sharpening machine *Max. hob diameter: 235 mm *Max. hob length: 280 mm *Number of flutes: 4 – 30 *Helix angle range: 0° – 45° *Grinding wheel diameter: 200 – 250 mm *Grinding spindle speeds: 1500 / 1900 / 2100 / 2600 rpm *Hydraulically driven table *Dividing mechanism with full set of change gears *Rigid industrial construction (approx. 3730 kg) *Original technical passport and manual (Russian) Typical Applications: *Sharpening and regrinding of gear hobs *Maintenance of gear cutting tools *Tool room operations in gear manufacturing *Repair and refurbishment of worn hobs *Small- and medium-series gear production support

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Nsdpfx Ascw Dg Dsc Ajlg Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Nlsdpfx Acsb Umtks Ajg

Year of construction: 1989, condition: used, Sharpening TOOL Schonberger NURNBERG TKRS location Nlsdpfx Ajcl Tttsc Aog Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client Cover startup Type negotiated description Comments GRINDING AND SAW tape Blades for circular saws and milling Dividing HAVE COMPLETE READY TO WORK

Condition: used, Sharpening machine for circular saws/rip saws IDL000829 Nlsdpfevlczvex Ac Aog - manufacturer: IMW

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Njdsxiv Ugspfx Ac Aslg Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Nlsdpfsxlfwpex Ac Aeg Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Nsdpfoxligusx Ac Aslg Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1137.05, Used tool grinding machine Njdpfx Acjwzk R Ne Aslg Manufacturer: KAPP Model: AST305B Year of manufacture: 1979 Serial number: 1137.05 With accessories

Year of construction: 2019, condition: as good as new (ex-display), Involute gear cutting tool Manufacturer: Gleason - Hurth Nsdpsfgwt Ejfx Ac Aelg Type: CH7M5R - 7B340-B1A 200 mm diameter unused delivered in a wooden crate Weight: 9.5 kg

Condition: used, Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm Nlsdozupl Nopfx Ac Ajg Control Siemens 840 D sl internal diameter 100-300 mm weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,30 x 3,80 m GLEASON-PFAUTER 300 PS Gear Skiving Machine – Year 2018 For sale is a high-performance CNC gear skiving machine type GLEASON-PFAUTER 300 PS, built in 2018. The machine is ideally suited for the precise machining of internal gears and offers excellent dynamics, advanced CNC technology, and a robust machine design. Equipped with a powerful Siemens 840D sl CNC control, this machine provides optimal conditions for efficient and repeatable gear manufacturing processes. Technical Specifications - Max. gear diameter: 450 mm - Max. module: 4 mm - Internal diameter range: 100 – 300 mm - Max. allowable skiving cutter diameter: 175 mm - Mounting surface diameter: 125 mm - Axis Travels: X-axis travel: 350 mm Y-axis travel: 300 mm Z-axis travel: 440 mm - Max. skiving head swivel angle: ±25° - Workpiece table outer diameter: 570 mm - Max. table load capacity: 5 kN - Feed Rates and Speeds X-axis feed rate: 12,000 mm/min Y-axis feed rate: 5,000 mm/min Z-axis feed rate: 8,570 mm/min - Tool speed: 0 – 3,000 rpm - Workpiece table speed: 0 – 1,500 rpm Additional Equipment / Information - CNC Siemens 840D sl - Swivel gripper slide travel: 180° - Operating voltage: 400 V - Machine weight: approx. 11 t - Space requirement: approx. 5.85 × 8.3 × 3.8 m - Hydraulic oil capacity: 150 l - Coolant capacity: 850 l - Motor and hydraulic cooling: 100 l The machine is in very good condition and is ideally suited for demanding series production and high-precision gear manufacturing applications. Inspection by appointment possible.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V Nodpfxezx Nyhe Ac Aslg control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: used, Year of construction: 1989, max. wheel diameter 120 mm gear width 400 mm max. module 10 Nlsdpfx Ajz Drcajc Aog min. module 1 total power requirement 40 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,840 x 5,025 x 2,490 m

Condition: used, Year of construction: 1983, max. wheel diameter 80 / 124 mm gear width 150 mm max. module 2 min. module 0,3 Nljdpfez Dk Afsx Ac Aog turning speeds 210 - 1680 U/min min. number of teeth 6 total power requirement 2,2 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 1,5 x 1,8 m Top condition.

Condition: used, Year of construction: 1974, max. wheel diameter 120 mm gear width 100 mm max. module 2 no. of teeth to be hobbed 6 - 325 Z helical lead min./max. 20 - 5000 mm hobbing length 130 mm range L-W-H 0,80x1,20x1,70 m Total weight, approx. 1000 kg Nlsdpfx Aez Ak T Rec Ajg

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Grinding wheel diameter 150 mm, lots of accessories good, well-maintained condition Njdpfx Acjz Dwmqo Ajlg Operating manual is available

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Nlsdpfxsy Hfm Ns Ac Aog Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: excellent (used), mount diameter: 50 mm, tool diameter: 50 mm, tool length: 330 mm, Tool presetting device WEINIG Opticontrol Swing diameter: 0 - 300 mm Nlsdpsz Eu Uzefx Ac Aeg Tool length: 0 - 330 mm Shank diameter: 50 mm

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second Nledpjxdh Hqjfx Ac Aog • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), For sale: Professional tool grinder by HASBERG, model FSS. German-made, solid and precise construction. 📊 Technical data: Manufacturer: HASBERG Model: FSS Year of manufacture: approx. 1976 Power supply: 3-phase 220/380 V Motor power: 250 W Speed: 2750 rpm Nsdpfxsy A Tqzj Ac Aslg 🛠 Condition: The item is used, shows normal signs of wear, and is in good technical condition. The machine is fully functional and ready for operation. 📦 Included: Set of collets (various diameters – as shown in the photos) Additional grinding wheels Accessories as visible in the photos ✅ Advantages: Very robust construction (German quality) Large set of collets (high value) Precise machining and tool sharpening Ideal for workshops, tool rooms, or production ℹ️ Additional information: The set for sale is exactly as shown in the pictures. Inspection on site possible. Shipment on a pallet or personal collection possible.

Condition: excellent (used), Catalog number: 8113 TECHNICAL DATA Nlsdpfsz Eavkex Ac Aog - Shaft width: 640mm - Max. thickness of the workpiece: 200mm - 4-knife shaft - Top: - Pawls - Toothed, pulling, sequential infeed shaft - Pressure roller - Planing shaft - Pressure roller - Smooth, pulling, metal outfeed shaft - Bottom: - 2 adjustable sliding rollers in the table - Main motor: 7.5kW - Electric table lifting - Smooth feed speed adjustment: 8-24m/min - Diameter of the dust extraction nozzle: 160mm - Dimensions (L/W/H): 1150x1450x1800mm - Weight: 1798kg ADVANTAGES – With knife sharpening device – Electric table lifting – Suitable for wet wood – Used thicknesser, very good condition Net price: 11900 PLN Net price: 2833 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm Nledowzyp Ispfx Ac Aog --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm >> Wet and dry, 2 chip conveyors, table diameter 2500 mm

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, total length: 6,100 mm, gear diameter: 180 mm, total height: 3,500 mm, total width: 3,000 mm, input frequency: 50 Hz, milling length: 170 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 300 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 300 mm, overall weight: 8,400 kg, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A high-performance machine for series production: the horizontal Gleason-Pfauter P 210 L, built in 2003, mills shafts, pinion shafts, and small gears up to module 4 and 180 mm in diameter at speeds of up to 4,000 rpm on the cutter and 1,000 rpm on the workpiece – designed for short cycle times and dry machining. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems with full spare parts and support availability. Modern Gleason-Pfauter kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, and we will inspect it together with you in Chemnitz. The horizontal design makes the P 210 L ideal for shaft machining: workpieces up to 830 mm are clamped between the spindle and tailstock, with 300 mm of axial travel and 100 mm of radial travel (center distance 30–130 mm). The milling head pivots by ±40°, and the tangential travel of 160 mm utilizes the full cutter length of 170 mm for long tool life. The high workpiece speed allows for multi-tooth hobbing cutters and thus the cutting performance required in the gearbox and automotive component supply sector. The machine is prepared for connection to a loading portal or a robot. Nodjz Et Rzepfx Ac Aelg Technical data: max. workpiece diameter 180 mm, max. module 4, working area radial 100 mm (30–130 mm), axial 300 mm (260–560 mm), tailstock 350 mm (480–830 mm), max. cutter diameter 180 mm, max. cutter length 170 mm, tangential travel 160 mm, cutter speed 300–4,000 rpm, max. workpiece speed 1,000 rpm, swivel angle ±40°, total connection value 50 kVA. Installation dimensions approx. 6.1 × 3.0 × 3.5 m, weight approx. 8.4 t. The machine will be delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in an air-conditioned control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometry acceptance is carried out according to the manufacturer's standard or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, distance table to spindle center: 755 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. Nedpoz Et N Refx Ac Aelg The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.