Used Shaft Furnace for sale (6,863)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale is a sintering and hardening furnace from Arnold-Schröder in very good, like-new condition, as can be seen in the pictures. Technical data: • Manufacturer: Arnold Schröder Industrieöfen • Model: ASM-20 • For temperatures up to 1300°C • Internal dimensions: approx. 250 x 350 x 200 mm (W x D x H) • Usable volume: approx. 18 liters • Power: approx. 6 kW • With Bentrup TC5050 control system • Year of manufacture: approx. 2015 • Condition: Like new, fully functional The furnace can be inspected and tested at any time! Iisdpfx Amszpzmnoljf Shipping costs via freight carrier: approx. €150 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Errors and omissions in technical data and prior sale reserved.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Ijdpfxozhg Eye Amloif Control cabinet brand new (original from THM recycling solutions GmbH) Hydr. feed pressure device (HNDE), feed hopper, Available from approximately the end of August.

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions Iisdezgtq Hjpfx Amlef 3,3 / 4,4 kw inspection gantry safety lid CE-approved Suitable for loader with “Easy Connect” overall dimensions (l x w x h) : 1.750 x 950 x 1.650 mm (open lid: H: 2.100 mm) infeed height : ± 1.350 mm dimensions drum : (l x w x h) : ± 860 x 670 x 565 mm + Loader for eurobins

Condition: used, Year of construction: 2012, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Iijdsu R Dhxspfx Amlsf Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: excellent (used), Catalog number: 8069 TECHNICAL DATA Iodpfx Asztqz Ajmljif - inlet dimension 600x960mm - outlet for shredded wood 200mm - 15kW motor - screen – for fine wood chips - shaft length 510mm - 2 shafts with counter-rotating knives - dimensions (length/width/height) 1400/1350/1900mm - weight 1450kg ADVANTAGES – very good condition – used wood chipper Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Isdpfx Aezn Icyjmleif Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final Isdpew S Iiiofx Amljif - Only 980 operating hours

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, immediately available -Tmax 1350°C -Usable internal volume (L x W x H) (mm) 600 x 500 x 500 -Batch weight 300 kg -External dimensions (L x W x H) (mm) 4200 x 2500 x 3500 -Footprint (L x W x H) (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Includes: -Protective gas buffer tank -Vacuum pump connection -4-flap design for cooling, allowing the flow direction of the gas stream to be adjusted horizontally or vertically. -Connection for liquid nitrogen, allowing the oven to cool down to -80°C. -Internal insulation made of graphite felt, protected and reinforced with CFC. We will build a second identical oven starting at the end of the year. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial ovens. Inspection in our warehouse is available upon request! Industrial oven, vacuum oven, vacuum furnaces, vacuum hardening oven, hardening furnaces, sintering oven, sintering furnaces. Iisdpfszr U Anjx Amlsf

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. Ijdpfx Amezphf Dsleif CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Year of construction: 1985, condition: good (used), machine/vehicle number: 108, Order No. 15256 Technical data: - Flexible shaft 1500 mm - 5 speeds - Belt sanding attachment - Power supply 380 V - Mobile base - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg Iijdpfx Aek Ea Tajmlsf

Year of construction: 1985, condition: good (used), machine/vehicle number: 376, Item No. 10275 Technical data: Iedpfsk E Ey Dsx Amleif - Flexible shaft 1500 mm - Infinitely variable speed control from 1000 to 12000 rpm - Power supply 380 V - Mobile base frame - Space requirement approx. W 750 x H 1400 x D 500 mm - Weight approx. 50 kg

Condition: excellent (used), Tatham Twin shaft paddle mixer Iisdpfjwfh Imjx Amlef Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base

Condition: good (used), Foundry4 Dosing Furnace TD1400DC Aluminium Melting Furnace Melting Furnace 850°C Capacity 1,400 kg Heating power 22 kW 4 units in stock Iijdpfxext Habj Amlof

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 1,000 mm, filling opening length: 1,050 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Iiodpfx Amoznnf Uoljf Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Foldable discharge conveyor. Isdpfxeu Di Azs Amljif Radio remote control.

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm - max saw blade diameter: 450mm - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm - weight approx. 2750kg Isdpfx Ameztac Njleif ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Net price: 55,900 PLN Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7960 TECHNICAL DATA - Max cutting height: 140mm - Max workpiece width: 700mm - Working width of saw shaft: 580mm - Shaft diameter: 70mm - Max saw blade diameter: 400mm From above: - Kickback pawls/anti-kickback devices - 2 feed rollers, toothed - Metal slip roller From below: - Slip roller - Kickback pawls - Smooth feed roller - Saw shaft - Smooth feed roller Iiodpfeztacisx Amlof - Metal slip roller - Stepless feed speed adjustment via inverter - Feed motor: 3kW - Main motor: 22kW - Overall dimensions (L/W/H): 1600x1300x1900mm - Weight: approx. 2000kg Net price: 46,900 PLN Net price: 11,170 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: 1 unit Forrec AE 600/30 single-shaft shredder: - Drive: 30 kW - Dimensions: 2,250 x 3,050 x 1,600 mm - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm - Hopper capacity: 750 liters - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Isdpfx Amjztaursloif Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz.

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) Iedpfx Amezr I Abeljif * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: new, Year of construction: 2019, pressing force: 400 t, pressure:400 t Iisdpfsd Ttydox Amlof distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production Iedpfx Aszrmpysmleif – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal pressure rollers - Pawls - Saw shaft - Smooth pressure roller - Pawls - Smooth pressure roller From below: - 2 metal, toothed feed rollers - Pawls - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter Ijdpfjzrmn Ajx Amljif - Main motors 2x55 kW - Feed motor 4 kW - Hydraulic lifting of the top/bottom frame - Hydraulic adjustment of saw shafts - Pump motor 0.37 kW - Central lubrication - Suction connector diameter: 1x300 mm, 1x380 mm - Dimensions (LxWxH): 3200x2350x2000 mm - Weight approx. 5500 kg ADVANTAGES – Italian manufacture – Double-shaft – Used multi-blade saw, in very good condition Net price: PLN 238,900 Net price: EUR 56,880 Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 2,500 kg, opening width: 1,400 mm, extraction nozzle diameter: 200 mm, power: 37 kW (50.31 HP), We are offering this used Gross GZ40 shredding plant, manufactured in 2021. Four-shaft shredder GZ 40 Feed opening: 1,400 x 1,300 mm Throughput capacity: material and screen dependent Isdpfx Aezr Rvdomljif Disc diameter: 280 mm Cutting head: 700 x 760 mm Number of cutting shafts: 2 Number of cutting discs: 38 Number of clearing shafts: 2 Number of clearing discs: 38 Motor power: 2 x 18.5 kW Screen size: without screen Suction nozzle: 200 mm Weight: approx. 2,500 kg Machine with hopper, control cabinet Year of manufacture: 2021 If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Isdpfszuabzjx Amljif Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Technical Specifications Manufacturer: Stahl Type: 8220 Design: Industrial furnace / Chamber furnace Condition: Used Further technical specifications according to the nameplate Equipment Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working chamber Suitable for professional use Ijdpfxoznv Eio Amloif Application Areas Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Chamber dimensions (internal): W 1000 H 1000 D 800