Used Shaft Furnace for sale (6,775)

Condition: used, Large Gas-Fired Furnaces for Sale: 7500 long x 2780 wide x 2000 height. These are Internal - bed sizes Iisdpfx Aaevitnhs Ijc Gas fired Eurotherm Control 4102. Will heat up steel to 1000 degrees C plus. Both installed and working order. Spares available including a controller and thermocouples.

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils Iedsl I Dx Nepfx Aa Isic

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Isdpjt S Sxgofx Aa Ieic Screw diameter approx. 370 mm Drive via geared motor

Condition: good (used), Frame formwork, pipe hangers, manhole ring hangers, manhole frame lifters, manhole ring lifters, sewer ring lifters Iedpfxjhp A I Ss Aa Isic -Manufacturer: Zagro, Hydraulic manhole frame lifter type HK 6 -Lifting round shafts: inner diameter of approx. 60 cm, outer diameter of approx. 78 cm -4 lifting cylinders -Transport wheels -Dimensions: 1400/1120/H1020 mm -Weight: 169 kg

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Iiodpfxey N Uxgj Aa Ioc

Year of construction: 1985, condition: used, Hardening furnace Heraeus Isdpfx Aegtxuqoa Ieic Type KM 260 width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c

Condition: used, Year of construction: 2012, functionality: fully functional, 12 months warranty, refurbished, delivery time approximately 3 weeks -Unit mounted on a base frame Iedpeyn Emqefx Aa Ijic -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 -Parallel swing door for opening in the hot state -Slot in the oven collar on the lower right side (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Oven, industrial oven, annealing oven, heat treatment oven, chamber oven

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment Ijdpeg R Sh Asfx Aa Ioic

Year of construction: 2020, condition: good (used), Winding roller, winding shaft, tensioning shaft, pneumatic expansion shaft, reel, reel rod, trapezoidal thread spindle, spindle, unwinding reel, unwinding reel, sheet metal unwinder -Manufacturer: Tidland, winding shaft Iijdeyxmrdjpfx Aa Isc -Type: G890E -Drive shaft: Ø 40 x 80 mm -Mounting: Bolt circle Ø 220 x 11 mm -Number: 8x winding shaft available -Price: per piece -Dimensions: Ø 250 x 855 mm -Weight: 53 kg/unit

Year of construction: 2022, condition: new, 1 x Niro-Tech dual-system twin-shaft paddle mixer. Model - RX-400. Capacity - 400 litres. Max product input - 320kg. Iedpfohq Rgpox Aa Ioic Installed power - 3kW. Electrics - 400v, 50hz, 3 phase. Manual loading valve with magnetic sensor. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 6 weeks for the manufacture of this machine.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, rotor diameter: 640 mm, number of blades: 62, total length: 2,000 mm, Vecoplan original rotor for VAZ2000 Iijdpfx Aajvktr Ao Ioc 60x60 mm cutters hardfaced rotor includes cutters

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Iiedpfev Hr Nxjx Aa Iec

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time Iodpsxiu Dmjfx Aa Ioic

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) Iiodpewd Haljfx Aa Ioc CE certification 12-month warranty New machine, built in Italy The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, power: 2 kW (2.72 HP), filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Hopper opening: length x width 1250 x 1000 mm Length x width: 1250 x 1000 mm Cutting unit opening: 562 x 462 mm Feed opening: 1250 x 1000 mm Length x width: 562 x 462 mm Iijdpeyma Tisfx Aa Iec Number of shafts: 4 pcs of which: cutting shafts 2 pcs cleaning shafts 2 pcs Number of cutting discs: 23 Shaft speed: 25 rpm.

Condition: excellent (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, We brought this back in 2023 for a specific project that never came off so it is nearly new. Ijdpjxftitjfx Aa Ijic We are looking to sell the shredder, WME infloor conveyor, and Helios fire system all together, new price was £440k for all 3. Our Presona LP100 cannot keep up with it but the most we have processed is 13 tons per hour, screened to 40mm secure paper destruction. It is still in place and runnning. Buyer to decommision and collect. This is also advertised elsewhere so we reserve the right to take it down at any time as trade sellers are also advertising and selling the machine

Year of construction: 2006, condition: good (used), Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Iedpfjhgkdqox Aa Ieic Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons.

Condition: used, Year of construction: 2008, machine/vehicle number: 972, temperature: 600 °C, inner dimension length: 2,500 mm, inner dimension width: 2,500 mm, inner dimension height: 3,500 mm, overall weight: 20,000 kg, number of chambers: 2, fuel type: gas, Part 1: WQ-98.98.138/35E Shipping weight: 20,000 kg Furnace Data Max. temperature: 600 °C Temperature uniformity: Continuous process: ±5 °C Iiedpfjy H I Szsx Aa Ioc Maturation process: ±3 °C Usable chamber dimensions Width: 2500 mm Length: 2500 mm Height: 3500 mm Load capacity Max. permissible load (gross): 2200 kg Performance data Heating power (gas): 1000 kW Installed power: 48 kW Technical data Supply voltage: 3 × 400 V / 50 Hz External dimensions Length: 4443 mm Width: 8395 mm Height: 7355 mm

Condition: used, Year of construction: 2021, machine/vehicle number: 902107, temperature: 250 °C, inner dimension length: 3,300 mm, inner dimension width: 2,900 mm, inner dimension height: 3,800 mm, total length: 10,800 mm, total width: 6,000 mm, total height: 7,700 mm, overall weight: 17,500 kg, fuel type: gas, Machine Data Weight: approx. 17,500 kg Oven Data Max. temperature: 250 °C Heating zones: 2 Usable Chamber Dimensions Width: 2,900 mm Height: 3,800 mm Length: 3,300 mm External Dimensions Width: approx. 6,000 mm Height: approx. 7,700 mm Length: approx. 10,800 mm Loading Max. payload (gross): 2,300 kg Performance Data Rated power: approx. 30 kW Gas burner output: 4 × 150 kW Gas pressure: approx. 150 mbar Technical Data Voltage: 3 × 230/400 V Frequency: 50 Hz Ambient Conditions Operation Temperature: +5 °C to +40 °C Humidity: < 75 % Max. installation height: up to 1,000 m above sea level Transport and Storage Temperature: +5 °C to +40 °C Isdey H I Rwopfx Aa Isic Humidity: < 75 %

Condition: ready for operation (used), Year of construction: 2005, L & Z Lathe / WEILER DA 210x1000 / With new 3-axis digital readout - Year of manufacture: 2005 - CE marking - Guideways in good condition - FULL TECHNICAL DATA SEE PHOTOS - Three-axis digital readout "NEW" - Quick-change collet system incl. 79 collets (173E) - Multifix base holder with inserts - 3-jaw chuck - Electrical chuck guard - Additional sliding guard - Coolant system - Drill chuck / live center - Chip guard rear wall - Work light - Complete documentation Iiedey H Ikqspfx Aa Ioc Dimensions: LxWxH 2.8x1.2x1.8 meters / Weight 1600 kg Errors / input mistakes excepted.

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Iisdsyk Ea Aspfx Aa Iec

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, power: 137 kW (186.27 HP), Conveyor belt continuous furnace, electrically heated, type DLE 600/200/3000 G, for soldering or annealing under exogas atmosphere. - Heating capacity: 137 kW - Soldering/annealing under exogas atmosphere - Conveyor belt width: 600 mm - Clearance above belt: 200 mm - Heated length: 3000 mm Isdjy Ddtiepfx Aa Isic - Net throughput performance: 254 kg/h - Max. temperature: 1150 °C

Condition: refurbished (used), Heating: electric Air circulator: 1 Temperature: 400°C Internal dimensions: (approx.) Width: 700 mm Height: 450 mm X Depth: 1300 mm X Can be increased to ~ 700 mm clear height by changing the furnace floor. External dimensions: (approx.) Width: 2200 mm Height: 2700 mm Depth: 2500 mm Heating output at 400 V = approx. 15 Y /45 Δ KW + approx. 2.2 kW for heating gas circulator + approx. 1.1 kW for door lift (The furnace is originally designed for 500 V) Iijdpstukp Eofx Aa Isc

Condition: good (used), Slotting bed for four-sided planer WEINIG Unimat 23 with 6 spindles. Used condition Iiedpfxeunbuvs Aa Ijc

Year of construction: 1997, condition: like new (used), Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm Electrical connection: 400 V kW Isdpfx Aast Ebpuo Ioic Space required: 1200 x 870 x 1810 mm Weight: 470 kg Heating output: 16.5 kW