Used Screw Pump for sale (13,018)

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Fedpexhduxsfx Alfogf Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Fjdjxx Avpepfx Alfjgf Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp Fgsdpfx Aozmt Ufjlfsf 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: used, Year of construction: 2012, total length: 750 mm, total width: 750 mm, total height: 950 mm, Empty weight: 100 kg - Year: 2012 Fgodpfx Aewgafmolfef - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: H2634320 - Transport dimensions: 750mm x 750mm x 950mm (l x w x h) - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, This listing is for Pfeiffer MVP020 Vacuum Pump (MVP020) The unit is in full working condition and ready for immediate use Compact, oil-free diaphragm vacuum pump designed for clean and quiet operation. Ideal for laboratory processes requiring consistent vacuum such as filtration, drying, and rotary evaporation support. Robust build ensures long-term reliability with minimal maintenance. Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Fgodpfxsy Ehpqo Alfsf Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for Javac CC141 Vacuum Pump The unit is in full working condition and ready for immediate use Fgjdpfx Aszgfu Dslfjf This reliable, compact laboratory vacuum pump delivers consistent performance for daily scientific and industrial applications. Built with durable materials, it is easy to maintain and operates quietly Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laborator

Condition: used, This listing is for 1 of 4 Watson Marlow 323 Peristaltic Laboratory Pumps Each unit is in full working condition and is ready for immediate use The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wear Fsdpfxsygmdho Alfsgf

Condition: used, This listing is for the KNF Neuberger Diaphram Pump PM16209-122 The unit is in full working condition and is ready for immediate release Description: A compact and corrosion-resistant pump suitable for general laboratory use. Fodexv A Rbspfx Alfegf Technical Features: 100% oil-free transfer Pure transferring, evacuation, and compression of gases Version for slightly aggressive or corrosive gases and vapours Maintenance-free Environmentally friendly Gastight, leakage rate approx. 6 x 10⁻³ mbar x l/s (not tested in serial production) Series N 022 diaphragm pumps are single-head, dry-running devices designed for a wide range of laboratory applications

Condition: used, This listing is for the Biotek Instruments Gast 7103034 Vacuum Pump 2. The unit is in full working condition and ready for immediate use. This Gast-manufactured pump provides consistent vacuum performance for laboratory applications including filtration and aspiration. Featuring a compact, oil-less design, it ensures low maintenance and clean operation. It is ideal for integration with BioTek washers or general benchtop fluid management. Transparency Report and Technical Audit: - Source Pedigree: Biotech / Research Facility - Condition: Direct-from-Bench (Decontaminated/Original) - Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. - Integrity: 100% Original Parts (Non-Refurbished) - Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Fgjdpfsywzgtsx Alfof Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Fedpfx Aod Sg Hcslfjgf Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump Fgjdpsiyya Ajfx Alfef cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled Fgodpfx Asiyx Uzjlfsf You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port new control board optional - equipment against additional price: screen-pack-changer pelletizing Fgsdpfx Aec Rukwslfsf material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you Fodpfoh Eyduox Alfjgf All ex our stock Wuppertal-Germany available

Condition: used, Lot of 10 Used Industrial Pumps – Various Brands & Sizes Fedpfx Aeztraajlfjgf We offer a complete lot of 10 used industrial centrifugal pumps, available from our warehouse in Rotterdam, The Netherlands. The lot consists of various pump configurations and sizes, including several pumps with stainless steel pump housings, large flange connections, and heavy-duty electric motors. The pumps come from an industrial environment and are offered as one complete lot. Lot details: Quantity: 10 pumps Condition: Used Various sizes and capacities Various electric motor sizes Several stainless steel pump housings Flanged inlet/outlet connections Complete pump/motor assemblies mounted on base frames Suitable for industrial applications The pumps have not been individually tested by us and are therefore offered in their current condition. Location: Rotterdam, The Netherlands Delivery: Ex Works Rotterdam, loaded onto buyer’s truck Payment: 100% payment in advance Terms of sale: The complete lot is sold “as is, where is”, without warranty or guarantee. No claims or returns will be accepted. Additional photographs and individual pump/nameplate information can be provided upon request. Preferably sold as one complete lot.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Fodpfezmgdaex Alfjgf Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Fgjdpszf Ivujfx Alfof Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: good (used), Year of construction: 2017, FOR SALE: Complete Industrial Compressed Air System / Unit – KAESER For sale, a complete, high-performance compressed air system from the KAESER brand, ideal for workshops, factories, or demanding industrial applications. High-quality German equipment, reliable, and well-maintained. DETAILS OF THE EQUIPMENT (3 MAIN UNITS): 1. Screw compressor with variable speed drive – KAESER CSDX 165 SFC Brand / Model: Kaeser CSDX 165 SFC (Sigma Profile) Year of manufacture: 2017 Rated power: 90.0 kW Maximum operating pressure: 8.5 bar Motor speed: 2980 rpm Series / Article number: 3111 / CSDX.4 Specific feature: Equipped with a variable speed drive (SFC) for optimized energy consumption management based on air demand. 2. Refrigerant air dryer – KAESER TF 280 Brand / Model: Kaeser TF 280 Year of manufacture: 06 / 2017 Maximum operating pressure: 16.0 bar Electrical supply: 400V / 3 Ph / 50Hz (Rated current: 9.6 A) Fgedpfjzqtdzox Alfof Refrigerant: R-134a (2.60 kg) Serial number: 1631 / Material: 1.2482.0 3. Fixed-speed screw compressor – KAESER CSD 102 T Brand / Model: Kaeser CSD 102 T Integrated equipment: Integrated air dryer module (T version) and SIGMA CONTROL electronic control. Usage: Ideal as a main compressor or as a backup to ensure a secure air supply. ADDITIONAL INFORMATION Overall condition: Good visual and functional condition, always maintained in a production setting. Availability: Immediate. Terms: Collection on-site, the responsibility of the buyer (suitable handling equipment should be provided).

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Fgjdpfx Aszpxnvelfjf Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors.

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Fodpeztl Udsfx Alfsgf

Year of construction: 2026, condition: used, - Manufacturer: KaMa - Year of manufacture: 2026 - With drip pan and drawer - Galvanized - Width: 600 mm - Depth: 900 mm - Height: 1,350 mm - Drip pan with drawer 600 x 900 mm Fgsdpfx Aoztf Nnjlfsf - With perforated metal grates and a drawer underneath for easy cleaning

Condition: used, mileage: 522,029 km, power: 291 kW (395.65 HP), first registration: 07/2016, fuel type: diesel, tire size: 315/60, tire condition: 20 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, total length: 6,060 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2016, Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Front axle: Tyre size: 315/60; Max. axle load: 7500 kg; Tyre profile: 20% Fgodpfxeztpcfo Alfsf Rear axle: Tyre size: 295/60; Max. axle load: 11500 kg; Tyre profile: 40% Weights Empty weight: 7.300 kg Carrying capacity: 11.700 kg GVW: 19.000 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Identification Registration number: 52-BHK-2

Condition: good (used), Ibex Pump Lobe pump Model: SR/4 Serial: 930590/01 Stainless lobe pump on frame, 50mm inlet and outlet pipe, 3Kw motor, 3Ph Fgjdpef Ecr Sefx Alfsf

Condition: excellent (used), Year of construction: 2015, Worthington Creyssensac RLR208B500G10 Air compressor 2015, air compressor and dryer, 8Bar, mounted on 500L tank, 3Ph Fsdpfx Aljwtqufefegf

Condition: good (used), Grundfos PNSNA96513352 Centrifugal pump Fodpfx Aex R U E Ajlfsgf Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). see plate for full spec, 2 in stock