Used Plaster Pump for sale (8,300)

Condition: good (used), Year of construction: 2022, Plastering machine concrete pump InoTec InoComb Maxi Power Set, year 2022, Ser.Nr.22612, 5,5kw drive motor 400V, delivery distance 50m, delivery height 30m, water pressure increase integrated, delivery 8-50l/min, compressor integrated, water hose, mortar hose ca.30m, fine plastering device short and long straight, good condition little used, many accessories Duedpfekl Adyjx Adysp

Condition: new, Year of construction: 2026, Putz P4 cement For on-site preparation of plasters CEMENT, SAND, LIME Pump motor 5.5 kw Mixer motor 2,2 kw 55/min Capacity for 2L6 pump approx. 25 l/min Capacity for 2L6 pump +++ 45 l/min Compressor 350 l/m Tank capacity 130 l Mixer capacity 130 l Height to mixer 118 cm Height to pump tank 71 cm Width of pump tank 64 cm Length without shoe 165 cm Weight 360 kg Included Duedpfx Adetuiqyjyjp Working hose Air hose Spray gun Hose cleaning ball Shneka 2L6

Condition: good (used), Busch Vacuum Pump Dujdpfx Ajwa Nzqjdysp Model 630 370 CFM

Condition: used, Nordson Problue 7 Hot Melt Pump Model Problue 7 Dujdpfx Adowq S Eyeysp

Condition: new, New - Lowara DOC Pump Suitable for clean and dirty water applications such as Cellar or Basement drainage or small sumps. With channel impeller and can be supplied with or without float switch. These pumps have thermal overload protection in case of dry-running and overheating. The DOC7 range has a 1 1/4" BSP Female discharge. General Specification of DOC Range: Delivery - 14m3/h flow rate 11m maximum head 3 Phase or 1 Phase 50/60 Hz Power 0.25 kW to 0.55kW 5m maximum immersion depth Temperature of pumped liquid - 0°C to 40°C DOC3 Djdpferupn Dex Adysup DOC7 up to 10 mm max suspended solids DOC7VX up to 20mm suspended solids Insulation class B IP68 rated 10m cable length supplied with Pump

Condition: good (used), Busch Vacuum Pump Model 400 Dusdpfx Adswa Ra Ujyop

Condition: good (used), Busch Vacuum Pump Type: 400-212 235 CFM Duodpfx Aowa Ucgjdyep Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: used, Nordson Problue Hot Melt Pump Dujdjwq Suujpfx Adysp Model - Problue 10 Facility to connect up to 6 hoses 10kg Tank Capacity

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Complete with 2 heated hose and dispensing guns, air solenoid & modules Duedpfx Adowq Sv Eoyjp Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: good (used), Busch Vacuum Pump Duedpfx Adjwa Unpeyep Model 400-212

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Dsdpfx Aoxv Apwsdyoup Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 159.7 kW (217.13 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,960 kg, input voltage: 400 V, total width: 2,220 mm, total length: 3,110 mm, total height: 2,150 mm, warranty duration: 6 months, heating capacity: 178 kW (242.01 HP), Aircooled chiller/Heat pump CLIMAVENETA NECS NR SL S 0704 159.7 kW/178 kW Cooling capacity: 159.7 kW / 45.41 tons (12/7 — 35°C) Heating capacity: 178 kW / 50.61 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP233KZE-TED-456 (scroll) + 2 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. Dimensions: 3.11x2.22x2.15 m. Weight: 1960 kg. Working hours: 0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Djdpfx Asxpv Dbjdyoup The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 123 kW (167.23 HP), type of input current: three-phase, type of cooling: water, overall weight: 760 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,700 mm, total height: 2,000 mm, warranty duration: 6 months, heating capacity: 136.9 kW (186.13 HP), Watercooled chiller/Heat pump Climaveneta NX WN 0402 123 kW/136.9 kW Cooling capacity: 123 kW / 34.97 tons (12/7 — 35°C) Heating capacity: 136.9 kW / 38.93 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 1 pcs. Bitzer GSU80295VLB4-2 (scroll) + 1 pcs. Bitzer GSU60235VLB4-2 (scroll) Type of refrigerant: R410a Dimensions: 1.7x1x2 m Weight: 760 kg Working hours: 17/16 h. Condition: Outlet Dusdov Tyd Rspfx Adyep CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 44.5 kW (60.50 HP), type of input current: three-phase, type of cooling: air, overall weight: 830 kg, input voltage: 400 V, total width: 1,150 mm, total length: 2,200 mm, total height: 1,500 mm, warranty duration: 6 months, heating capacity: 50.4 kW (68.52 HP), Aircooled chiller/Heat pump Climaveneta AWR HT D LN CA E 0152 44.5 kW/50.4 kW Cooling capacity: 44.5 kW / 12.65 tons (12/7 — 35°C) Heating capacity: 50.4 kW / 14.33 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Recuperation. Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH24KVE-TWD-526 (scroll) Type of refrigerant: R407c Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump EBARA DWC-V/I 300/1.1-Q1AEGG Dimensions: 2.2x1.15x1.5 m Dujdpfx Adevrwv Ioysp Weight: 830 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 24.7 kW (33.58 HP), type of input current: three-phase, type of cooling: air, overall weight: 265 kg, input voltage: 400 V, total width: 570 mm, total length: 1,450 mm, total height: 1,700 mm, warranty duration: 6 months, heating capacity: 26.1 kW (35.49 HP), Aircooled chiller/Heat pump CLIMAVENETA I BX N 025T HASNV 24.7 kW/26.1 kW Cooling capacity: 24.7 kW / 7.02 tons (12/7 — 35°C) Heating capacity: 26.1 kW / 7.42 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB52FFTMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10 (inverter), expansion vessel. Dimensions: 1.45x0.57x1.7 m. Weight: 265 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Dedjxwmg Ajpfx Adyjup Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 18.7 kW (25.42 HP), type of input current: three-phase, type of cooling: air, overall weight: 205 kg, input voltage: 400 V, total width: 570 mm, total length: 1,450 mm, total height: 1,200 mm, warranty duration: 6 months, heating capacity: 21.7 kW (29.50 HP), Aircooled chiller/Heat pump Climaveneta I-BX-N 020T HANNV 18.7 kW/21.7 kW Cooling capacity: 18.7 kW / 5.32 tons (12/7 — 35°C) Heating capacity: 21.7 kW / 6.17 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DNB36FAEMT (scroll, inverter) Type of refrigerant: R410а Number of fans: 1 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10, expansion vessel, buffer tank. Dimensions: 1.45x0.57x1.2 m Weight: 205 kg Working hours: 0 h. Condition: New Duedpfx Asxw U I Ijdyep CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 433 kg, input voltage: 400 V, total width: 860 mm, total length: 2,050 mm, total height: 1,660 mm, warranty duration: 6 months, heating capacity: 25 kW (33.99 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Dsdpfx Adevmzrijyeup WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), Chemical pump, slurry pump, chemical industrial centrifugal pump, used machine with explosion-proof motor Manufacturer: CEMP International -type: Bredel HOSE Pumps SP/32 Dsdpfxettvtvj Adyeup -inclusion size: 1210x670x840mm -stump size: DN50 -electrical data: 400V; 6.3A

Condition: good (used), Promoted by APEXPUMPS Bristol UK -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 Dusdpfx Aot A U H Iodyop -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 420 kW (571.04 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,955 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,600 mm, total height: 2,500 mm, warranty duration: 6 months, heating capacity: 451 kW (613.19 HP), Aircooled chiller/Heat pump Panasonic ECO I W AQUA 450 H 420 kW/451 kW Cooling capacity: 420 kW / 119.42 tons (12/7 — 35°C) Heating capacity: 451 kW / 128.24 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Dodpfjwnqu Iex Adyjup Compressors: 4 pcs. Bitzer GSD80485VLB4-2 (scroll) Type of refrigerant: R410a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.6x2.3x2.5 m. Weight: 3955 kg. Working hours: 6/6/6/6 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 308.3 kW (419.17 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,899 kg, input voltage: 400 V, total width: 2,200 mm, total length: 4,600 mm, total height: 2,650 mm, warranty duration: 6 months, heating capacity: 333 kW (452.75 HP), Aircooled chiller/Heat pump Systemair SYSCROLL.330.AIR 308.3/333 kW Cooling capacity: 308,3 kW (12/7 — 35°C) Heating capacity: 333 kW (40/45 —7°C) Year of manufacture: 2018 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Copeland (scroll) Number of fans: 8 pcs. Type of refrigerant: R410A Dimensions: 4.6 x 2.2 x 2.65 m Weight: 2899 kg Condition: Excellent, Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Djdpjxxkflefx Adysup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 46 kW (62.54 HP), type of input current: three-phase, type of cooling: air, overall weight: 507 kg, input voltage: 400 V, total width: 1,100 mm, total length: 2,250 mm, total height: 1,750 mm, warranty duration: 6 months, heating capacity: 54 kW (73.42 HP), Aircooled chiller/Heat pump SYSTEMAIR AQR290-H050.PROTO 46/54kW Cooling capacity: 46 kW / 13 tons (12/7 — 35°C) Heating capacity: 54kW / 15,3 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump Heat exchanger: Plate Refrigerant circuit:1 pcs. Compressors: 2 pcs. Copeland (scroll) Type of refrigerant: R290 Number of fans: 1 pcs. Dimensions: 2.25x1.1x1.75 m Weight: 507 kg Working hours: 0/0 h. Condition: outlet, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Duodpfsvnmm Uox Adyop By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 306 kW (416.04 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,500 kg, input voltage: 400 V, total width: 950 mm, total length: 3,400 mm, total height: 2,000 mm, warranty duration: 6 months, heating capacity: 340 kW (462.27 HP), Watercooled chiller/Heat pump Climaveneta NX WN 1004 306 kW/340 kW Cooling capacity: 306 kW / 87.01 tons (12/7 — 35°C) Heating capacity: 340 kW / 96.68 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Kiplink Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410a Hydraulic module: 2 pcs. water pump Grundfos TPED 80-210/2 Dimensions: 3.4x0.95x2 m Weight: 1500 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Dodpfsv S Tzyjx Adyeup By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 44.9 kW (61.05 HP), type of input current: three-phase, type of cooling: air, overall weight: 610 kg, input voltage: 400 V, total width: 1,200 mm, total length: 1,900 mm, total height: 2,000 mm, warranty duration: 6 months, heating capacity: 53.1 kW (72.20 HP), Aircooled chiller/Heat pump Climaveneta NX N G06 LN K 0202P 44.9 kW/53.1 kW Cooling capacity: 44.9 kW / 12.77 tons (12/7 — 35°C) Heating capacity: 53.1 kW / 15.1 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU60120VLB4-2 (scroll) Type of refrigerant: R454B Number of fans: 4 pcs. Dimensions: 1.9x1.2x2 m. Weight: 610 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Dsdpfx Adev Tnh Dsysup WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 366 kW (497.62 HP), type of cooling: air, overall weight: 3,203 kg, total width: 2,260 mm, total length: 5,300 mm, total height: 2,410 mm, warranty duration: 6 months, heating capacity: 349.9 kW (475.73 HP), Aircooled chiller/Heat pump LENNOX GAH370DP2M 366 kW/349.9 kW Cooling capacity: 366 kW / 104.07 tons (12/7 — 35°C) Heating capacity: 349.9 kW / 99.49 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Danfoss DSF270A4AAA (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (EC-fans) Dimensions: 5.3x2.26x2.41 m. Weight: 3203 kg. Working hours: 63/60/76/92/95/92 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Djdpfxjx Rbw Ee Adyeup The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.