Used Scm Si 3200 for sale (655)

Condition: excellent (used), SCM S52 thickness planer Max. planing width: 520 mm, Max. planing height: 240 mm, 4 classic knives (wedge-type), electric lifting + manual lifting, feed speed infinitely adjustable, metal infeed roller, 2 rollers in the table, adjustable, digital height display, 160mm dust extraction port, 5.5KW motor, Tsdpfx Aeza Dg Hokied quiet operation, machine in good condition.

Condition: excellent (used), Year of construction: 2022, Tilting Spindle Moulder Manufacturer: SCM Model: NOVA TI 105 Year of manufacture: 2022 Todoy Sg Ncopfx Akied Table size: 254 x 85 cm Power: 7 kW Tilting: Single-sided 45° Height adjustment: 120 mm Spindle diameter: 30 mm Height and angle adjustment: Electric Left/right rotation: Yes Speeds: 3500/6000/8000/10000 rpm Motor brake: Yes Including feeder

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Tjdpfxozuyk No Akied Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), C.E. Tjdpfx Ajzn I Hfokied

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) Tjdpfx Aoyywi Aekiod N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: used, Year of construction: 1999, functionality: fully functional, total width: 1,600 mm, total height: 2,000 mm, total length: 2,000 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,187 kg, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, extraction nozzle diameter: 160 mm, input frequency: 50 Hz, input voltage: 400 V, - Italian made - DTR (technical documentation) and CE certified TECHNICAL SPECIFICATIONS: - Maximum working width: 1100 mm - Maximum working height: 170 mm - Minimum working height: 3 mm - Minimum working length: 370 mm - Dimensions of sanding belts (width x length): 1115 x 1900 mm - Feed motor power: 0.8 kW - Two feed speeds: 4.5 and 9 m/min - Sanding height adjustment motor power: 0.25 kW - 2 units (aggregates): 1) Grooved steel calibrating roller, Ø 140 mm - Rubber pressure roller 2) Grooved rubber roller + shoe + steel roller - Rubber pressure roller - Aggregate I and II motor power: 15 kW Tsdpfx Aeytp Agokijd From below: - 3 pressure rollers - Conveyor belt - 3 pressure rollers - Pneumatic belt oscillation - Air blower for the second sanding belt - Electric and manual table lifting (for precise setting) - With pneumatic brake - Sanding belt speed: 16 m/s - Operating pressure: 6 - 8 bar - Extraction port diameter: 2x160 mm, 2x110 mm Machine dimensions: - Overall dimensions (LxWxH): 2000x1600x2000 mm - Weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA2/004582, functionality: fully functional, operating hours: 14,500 h, travel distance X-axis: 3,120 mm, travel distance Y-axis: 1,320 mm, number of axes: 5, TECHNICAL DETAILS X-axis travel: 3,120 mm Y-axis travel: 1,320 mm Number of axes: 5 MACHINE DETAILS Operating hours: approx. 14,500 h EQUIPMENT Suction pads Mounted air-blow nozzle Newly installed control unit Tjdpfx Akjy Akr Aoiod Note: The machine has already been dismantled by the manufacturer.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° Todpfxjy El U Dj Akiod – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Tjdpsy Dhudofx Akied

Condition: used, functionality: fully functional, total width: 1,280 mm, total height: 1,920 mm, total length: 1,560 mm, working width: 900 mm, overall weight: 1,100 kg, type of input current: three-phase, input voltage: 400 V, SCM Sandya Uno Wide Belt Sander Working width: 900 mm Working height: 3–160 mm Todpfszvfb Nox Akisd Number of sanding units: 2 Unit with rubber roller Combi unit with pad Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Machine dimensions: 1560 x 1280 x 1920 mm Weight: approx. 1100 kg

Condition: excellent (used), functionality: fully functional, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total length of planing tables: 1,250 mm, total width: 1,050 mm, total height: 805 mm, overall weight: 1,000 kg, SCM S 63 PLANER – 630 mm | 4 KNIVES | 5.5 kW | JBS MACHINES! Professional SCM S 63 planer with a planing width of 630 mm. Robust, industrial-grade construction designed for precise wood processing. A machine for carpentry workshops, production facilities, and demanding users seeking a reliable machine with a large working width, rather than a lightweight design intended for occasional use. SCM is a renowned Italian manufacturer of woodworking machinery. The S 63 model features a rigid construction, a large worktable, and a 4-knife cutterhead, making it ideal for daily woodworking tasks. KEY ADVANTAGES: - Planing width up to 630 mm – allowing for the processing of wide workpieces - 4-knife cutterhead (traditional knives) - 7.5 kW motor – suitable for professional use - Robust SCM construction – machine designed for workshop use Tedpez A Apzefx Akied - Adjustable feed rate via lever - Large worktable - Construction ensuring stability during operation - Ideal machine for carpentry workshops, furniture, door, stair, and wood element production TECHNICAL DATA: - Manufacturer: SCM - Model: S 63 - Planing width: 630 mm - Maximum planing height: 240 mm - Minimum planing height: approx. 3 mm - Cutterhead: 4-knife - Number of knives: 4 pcs. - Cutterhead speed: 4500 rpm - Feed rate: 6 / 9 / 12 / 18 m/min - Motor power: 7.5 kW - Power supply: 380 V - Table dimensions: 630 × 1000 mm MACHINE DIMENSIONS: - Length: 1250 mm - Width: 1050 mm - Height: 805 mm Weight: 1000 kg WHY IS IT WORTH IT? If you are looking for a real workshop machine with a width of 630 mm that will allow you to process larger workpieces, the SCM S 63 is a solution worth considering. This is not a small, lightweight planer for occasional use. The large working width, heavy-duty construction, and 4-knife cutterhead make this machine an excellent choice for a facility that needs efficient wood processing. Machine available for immediate delivery. Before purchasing, you can view and test the machine. Please contact us – we will be happy to provide additional information about the machine, transport, and loading options. It is possible to test the machine on-site. Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved. Todpez Aquhofx Akijd

Condition: used, Year of construction: 2014, power: 6.6 kW (8.97 HP), travel distance X-axis: 3,681 mm, travel distance Y-axis: 1,655 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,252 mm, workpiece height (max.): 180 mm, number of axes: 3, Equipment: CE marking, documentation/manual, F11 Drilling Unit Includes: 7 independent vertical spindles (4 on the right and 3 on the left) Drill chuck M 10 / diameter 11 mm Distance between spindles 32 mm 2 double horizontal drilling heads (1+1), 1 in X and 1 in Y (drill chuck M8 / diameter 9 mm) Drill speed 4000 rpm 1 integrated saw blade in X direction (max. diameter 120 mm) Saw blade speed 5000 rpm Motor power 2.2 kW Vertical travel with pneumatic release of the entire unit 250 mm Vertical travel with pneumatic release per spindle 60 mm Extraction hood all around 6.6 kW – 9 HP electric spindle Includes: Tool holder HSK F 63 Speed 1500 - 24000 rpm Todpfx Akjz Aubxjiod Motor power (S1/S6) 5.5/6.6 kW (7.5/9 HP) from 12000 to 18000 rpm Right and left rotation Static inverter for stepless speed adjustment and immediate stopping of rotation Extraction hood all around Tool changer TR10 10-position lateral tool changer for tools and angle gearboxes Central lubrication with manual pump Vacuum pump, output 90/108 m³/h at 50/60 Hz 8 TVF work tables and 18 interchangeable vacuum suction cups 120x120 mm Second set of stops Laser device for positioning the suction cups

Condition: excellent (used), functionality: fully functional, two bottom heads Tedpfez D Acwox Akied one side - right head heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Spindle diameter: 50 mm Bushing diameter: 70 mm Tedpsz Enhzsfx Akisd Bushing equipped with spacer rings Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: excellent (used), SCM nova fs410 thicknesser planer Planing width: 410mm, 4 knives, 2 feed speeds, Thicknesser table mounted on 4 screws, Manual adjustment of the thicknesser table, Max. planing thickness: 240mm, Length of the planer tables: 220cm, Electric brake, Adjustable planer fence, 7KW motor, Machine inspected, very good condition, Tsdpfx Asz Epcgjkisd Weight: approximately 550kg.

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and Technical Specifications: - Working/planing width: 520 mm - Max. thickness planer passage height: 240 mm - Total length of the planing tables: 2,200 mm - 4-blade TERSA planing spindle - Planing spindle diameter: 120 mm Tsdezwqdxspfx Akijd - Planing stop swivels up to 45° - Solid cast iron planing tables - Feed speed: up to approx. 17 m/min - Thickness planer table with height adjustment - Integrated exhaust hood

Condition: excellent (used), Year of construction: 2010, -max.width-240mm Todpfoz Rnlfox Akisd -work heads 4+1

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): Todpfx Ajzv Tibskijd lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: AA1/015841, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 6,050 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of slots in tool magazine: 12, total length: 7,250 mm, total width: 2,420 mm, overall weight: 4,800 kg, table length: 6,050 mm, table width: 1,240 mm, Equipment: CE marking, SCM RECORD 100 AL XL CNC machining center, manufactured in 2006. A machine from the renowned Italian manufacturer, SCM Group, designed for professional processing of wood, MDF, plywood, chipboard, and other wood-based materials. Model: RECORD 100 AL XL Year of manufacture: 2006 Weight: 4800 kg Power supply: 400 V / 3 phases / 50–60 Hz Rated current: 62 A Technical specifications Working area / axes: X-axis: 6050 mm Y-axis: 1240 mm Todpfxozynkhe Akied Z-axis: 200 mm Rapid traverse X: 60 m/min Rapid traverse Y: 45 m/min Rapid traverse Z: 30 m/min Electrospindle: manufacturer: SCM power: 8.5 kW maximum speed: 24,000 rpm tool holder: HSK-F63 automatic tool changer automatic magazine: 12 HSK-F63 tools Drilling unit: 7 vertical spindles 5 horizontal/angled spindles capability for vertical and side drilling Vacuum system: 2 × Becker VTLF 250 vacuum pump performance of one pump: 248 m³/h at 50 Hz total rated performance: 496 m³/h power of one pump: 5 kW vacuum: 200 mbar Other equipment manual manipulator for machine operation table with vacuum clamping system capability for processing parts with a length of over 6 meters central chip extraction system from the machining head brush guard for the machining head safety mats complete enclosure of the working area CE marking The machine has a large working area of 6050 × 1240 mm, making it suitable for both standard panels and the processing of very long parts. The powerful 8.5 kW / 24,000 rpm / HSK-F63 electrospindle, automatic tool changer, and 12-position HSK magazine allow for the performance of various operations without manual tool changes. An additional advantage is the drilling head equipped with 7 vertical and 5 horizontal spindles, as well as a highly efficient vacuum system with two Becker VTLF 250 pumps with a total rated performance of approximately 496 m³/h. The machine has a solid, industrial-grade construction – weight 4800 kg.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control MAESTRO consolle "eye-M PRO" Software “3D PROBE" per controllo automatico dimensioni pannello Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 Tsdpfx Akozx Dvdoiod Total installed power (A) 43 WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC (power Kw 3.9) with spindles: - No. 21 Independent vertical boring spindles - No. 10 Independent horizontal boring spindles (6 in X + 4 in Y) - No. 3 Independent boring spindles (for hinges) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 7,5 Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions)

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Tedpfxszx R Dne Akisd Year of manufacture: 2018 Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: used, functionality: fully functional, SCM Sandya 5 wide belt sander Working width: 1100 mm Sanding height: 4 – 170 mm Tsdpfozx Afqox Akijd 1 metal sanding unit 2 combi sanding units Electric height adjustment Optical oscillation

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Tsdpfx Akozyx Evoijd Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, working height: 150 mm, height adjustment type: electric, grinding belt length: 2,150 mm, SCM Sandya 10 wide belt sanding machine Working width: 1100mm Working height: 5-150mm Tjdpfjz Huwrsx Akiod Number of sanding units: 2 1. Metal calibrating roller 2. Metal combi unit with sanding shoe Combi unit with sanding belt blowing system Two feed speeds Material thickness gauge Main motor power: 15kW Machine weight: 1750kg Machine dimensions: 165x186x206cmH