Used Scm Si 16 Wa for sale (596)

Condition: used, SCM T 130 LL heavy-duty spindle moulder LL version – long table with pull-out frame support 7.5 kW motor 5 speeds, 3000–10,000 rpm automatic spindle height adjustment (up/down) control panel on top Kdjdpjyi D Hlsfx Ah Eoh fence with fine adjustment WITHOUT power feed unit Machine is FULLY OPERATIONAL and in GOOD CONDITION Available from stock in Lieboch

Condition: used, heavy-duty surface planer SCM F 520 planing width 520 mm table length 2,960 mm hydraulic height adjustment of infeed table via foot pedal, with micrometer display for chip removal 4-knife safety cutterblock sharp and hollow joint adjustment main motor 4 kW electric motor brake CE version Machine is FULLY FUNCTIONAL and in GOOD CONDITION from vocational school Kdjdpfx Ahjyi Dxus Eoh available from stock in Lieboch

Condition: used,

Condition: good (used), Year of construction: 1991, spindle moulder, spindle moulder, wood milling machine -Manufacturer: SCM, table milling machine type T 110 A with table extension -Drive: 4 kW -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/8,000/10,000 rpm -Table extension: with stops on both sides see photos -Dimensions total: 3600/910/H1610 mm / machine 2615/750/H1320 mm Kjdpfx Aowhbthjh Ejdh -Total weight: 550 kg

Condition: excellent (used), functionality: fully functional, SCM Sandya 10 RCS Wide Belt Sander Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 1. Calibrating roller 2. Combi unit with pad Kdedpfx Aheyk R H Io Eoh CE Certificate Main motor power: 11 kW

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Kodpfx Ahovvi I Ro Ejdh

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Kdsdevwbp Aepfx Ah Eeh

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Kedpfsvvi Htox Ah Esdh Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: used, Year of construction: 2004, Storage location: Nattheim Ksdpfxsvvi Hyo Ah Ejdh

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Kdjdpfxsvvi N Ie Ah Ejh

Condition: used, Year of construction: 1999, Storage location: Nattheim Kodpfx Asvvi Rxsh Esdh

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Kedpfxjvvi Sce Ah Esdh

Condition: used, Storage location: Nattheim Kdedpfx Ajwkirqoh Ejh

Condition: used, functionality: fully functional, Edgebanding unit End trimming unit Kedpfxoxfuh De Ah Eedh Trimming unit 2nd trimming unit Sanding unit

Condition: excellent (used), SCM K100 edge banding machine pre-milling cutters, Kjdpfx Asyk D D Toh Eodh glue application with roller, glue pot with quick-change function pneumatic pre-cut guillotine, pressure rollers, finishing trim saw, upper and lower milling unit R1 – R2, flat scraper, machine length: 320 cm, feed rate: 7 m/min, max workpiece height: 50 mm, max edge thickness: 3 mm, used machine, in very good condition. Only 18,500 m processed. Inspection possible before purchase.

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Kdsdpow Aig Ssfx Ah Eoh Storage location: Customer.

Condition: excellent (used), SCM Olimpic K360 Edge Bander Liquids before pre-milling cutters Pre-milling cutters, Glue application with roller, + additional tank Pneumatic pre-cut guillotine, Pressure rollers, Finishing saw with rounding option Top-bottom milling unit R1 – R2, pneumatically adjustable Kedpeykn I Nefx Ah Ejdh Corner rounding unit Profile scraper, pneumatically activated Liquids Flat scraper, pneumatically activated Polisher Machine length: 420 cm Max workpiece height: 60 mm Max edge thickness: 3 mm Feed speed: 11 m/min Used machine, in very good condition. Possibility to test before purchase. Only 36,300 meters processed.

Condition: used, Year of construction: 2017, Max. working width: 630 mm Number of knives: 4 pcs Cutterblock: Tersa cutterblock Motor brake: Yes Max. thicknessing height: 300 mm Min. thicknessing height: 3.5 mm Max. chip removal: 8 mm Thickness display: digital display Infinitely variable feed speed: 4-20 m/min Thicknessing table guidance: 2-point Thicknessing table spindles: 4 pcs Infeed rollers: steel, serrated Kdedpfx Aheyfwg Ro Esh Outfeed rollers: rubber, 2 pcs. Noise reduction: Yes Weight approx.: 925 kg Motor power: 7.5 kW Extraction diameter: 150 mm Stock location:

Condition: excellent (used), SCM 350 Multi-Purpose Machine – Panel Saw, Thicknesser Thicknesser: Width: 35 cm, Max height: approx. 220 mm, 3 knives, 1 feed speed, Jointer: Width: 35 cm, Table length: 180 cm, 3 knives, Tilting fence, Spindle moulder: Shaft diameter: 30 mm, Spindle adjustable up-down and tilting, 4 speeds, Side sliding carriage, Adjustable fence, Saw: Adjustable up-down and 0-45°, Side sliding carriage, Rule on side carriage, Scoring unit, Max blade diameter 300 mm, Cutting height with 300 mm blade – 90 mm, Horizontal borer: Table adjustable up-down, front-back and left-right, Kodoyhdcdopfx Ah Eedh The machine has 3 motors, each 3 kW, 380V power supply, Used machine in very good condition, ready to work, Solid multi-purpose machine.

Condition: like new (used), SCM bottom spindle moulder Sliding carriage in the table 120 cm Kedpswt A Iqjfx Ah Esdh Height and tilt electrically adjustable Spindle fi30 7 kW motor 4 spindle speeds Very good condition

Condition: excellent (used), Panel – sliding table saw SCM class px 350i, cutting length 320 cm, tilt angle of unit 0–45 degrees, max. blade diameter 350 mm, Kdodsyf H Tgspfx Ah Eoh max. cutting height 105 mm, max. cutting height at tilt 72 mm, cutting width on rear fences 1300 mm, motor 5.5 kW, saw blade speed – 4000 rpm, fixture for angle cutting, machine in very good condition, possibility to test prior to purchase.

Condition: excellent (used), SCM T130 Shaper (Spindle Moulder) Long tables with extension 4-roller power feed Spindle diameter 30 mm Motor 5.5 kW 5 spindle speeds Foot brake Forward/reverse rotation Machine condition: very good. Kdjdpfx Ahexw U N Ej Ejh

Condition: excellent (used), SCM TF130 Class Spindle Moulder Long tables with extension Table length: 253 cm Kjdpfx Ahjydvtys Eedh Spindle diameter: 30 mm 5.5 kW motor with brake Left/right spindle rotation 5 spindle speeds Spindle lock Machine is in very good condition.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. If customer wishes it can be seen working. Kdedpfxsxn Um Ss Ah Esh

Condition: excellent (used), Year of construction: 1988, SCM F410 surface planer Kdedjx Uqaqjpfx Ah Eoh Planing width: 410 mm Table length: 2,600 mm Number of knives in cutterblock: 4 pcs Long-hole boring unit is mounted on the machine