Used Scm P 64 for sale (650)

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/uni two axes heads regulation Rcodpfx Aeyxlrcedzef pneumatic clamps variable regulated feeder spindles diameter 40mm delta/star start table lubrication

Condition: used, Four-sided planer SCM SUPERSET NT, max. width 240 mm, max. height 120 mm, feed with frequency inverter 5–25 m/min, 5 spindles, spindle diameter 40 mm, infeed table length 2500 mm, Redeyu Thvopfx Adzjcf year of manufacture 2024.

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Rcodenwkbcjpfx Adzjf Feeding speed up to 12m/min. PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Max. forward feed speed: 25 m/min Operator shafts number: 6 Rcsdpfx Asw Iddzjdzsf

Condition: used, Sander SCM TYPE UNO 900 mm Rcjdpfx Adex I R Smszsf

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine will be partial reconditionned at our facility prior to delivery. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Electronic vertical and horizontal positioning Rjdpfx Ajzq Hiqodzjcf 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Dust extra...

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Rcjdpfsg Umrmex Adzsf Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2006, condition: ready for operation (used), USED AUTOMATIC PANEL SAW WITH FRONT LOADING Brand: SCM Model: SIGMA IMPACT Year: 2006 CE compliance Useful cutting dimensions: 3200 x 3200 mm. Cutting height: 67 mm Rsdshkr A Sspfx Adzjcf 3 air tables: one long and two shorter, wide tables 6 pneumatic clamps Main saw motor: 10 HP Scoring saw. PC with WINCUT software.

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Rcedpozfprkofx Adzjf Chipbreaker on the right and left spindles. Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Track shoe width 50 mm for processing narrow parts. Machine in perfect condition, ready for use.

Condition: excellent (used), Year of construction: 2004, TECHNICAL DATA : Planing width 230 mm Planing height 120 mm Infeed table : 2000 mm Infeed speed : 2 - 25 mtr/min ( 1,1 Kw ) Spindle configuration : 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW( Digital adjusteble ) 4) horizontal, top 230 mm 7.5 kW ( Digital adjusteble ) 5) Horisontal lower, 4 Kw all spindles up / down, right / left Spindle diameter 40 mm From the top 3 introducing rollers, metal, torsion, including 2 double Rcjdpfx Asykch Djdzjf Top pulling roller, double rubber Pressure 1 pc on the side A rubber pulling roller in the lower table top, before outfeed Central lubrication Measures : L 3850 x W 1200 x H 1600 mm, weight : 1957 Kg.

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Rsdpfex A E Tfsx Adzecf Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm Redjxxkt Ajpfx Adzocf • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Redpfx Adjtwzyfezocf Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), functionality: fully functional, working width 230mm working height 120mm Redpfeyxlq Sox Adzjcf 4 heads heads adjustable in two axes diameter of spindles 40mm control of planing dimensions from the panel star/delta start of spindles two feed gears table top lubrication system year of production 1998

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, A Great machine for the most efficient and efficient production of windows and doors. Rcodpfxezif Eue Adzjf

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 140 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom 5.5 kW right + left 11 kW top 7.5 kW feed 3 kW Manual adjustment of all heads Number of top steel pulling rollers: 4 Number of top rubber pulling rollers: 1 1 rubber roller in the top Extraction spigot diameter: 130/150 mm Infinitely adjustable feed rate: 4-26 m./min Feed on gimbals Working table lubrication pump Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Redpjqv Awisfx Adzscf Overall dimensions: Length: 4180 mm Width: 1720 mm Height: 1740 mm

Condition: excellent (used), working width 230mm Rcsdpfx Aoyxd Hlsdzjf working heigth 120mm 4 spindles spindles diameter 40mm pneumatic clamps of feeding rolls two axes heads regulation variable regulated feeder delta/star start electric regulation of top head

Condition: excellent (used), two bottom heads one side - right head heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads Redpfxjyxcv Ss Adzscf right/left spindles

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 3,710 mm, travel distance Y-axis: 1,620 mm, number of axes: 5, spindle motor power: 13,500 W, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli M100 CNC Wood Machining Centre was manufactured in 2023. It features an impressive X-axis working range of 3,710 mm and a Y-axis working range of 1,620 mm. The machine is equipped with a 5-axis milling unit and a drilling unit with 13 vertical spindles, providing versatile woodworking capabilities. If you are looking to get high-quality woodworking capabilities, consider the SCM Morbidelli M100 machine we have for sale. Contact us for further details. • Working area • Max. panel loading width / Y passage: 2,200 mm • Z-axis workpiece passage: 250 mm • Pendulum working length: 1,700 + 1,700 mm • X+Y vector speed PRO-SPACE: 56 m/min • X+Y vector speed PRO-SPEED: 78 m/min • PRO-SPACE safety configuration: X-axis limited to 25 m/min for operator safety • 5-Axis Milling Unit – JQX • 5-axis JQX electrospindle, HSK 63F • B-axis rotation: ±185°, speed: 7,000°/min • C-axis rotation: ±320°, speed: 7,000°/min • Programmable CW/CCW rotation, ceramic bearings, liquid-cooled Rodpfx Adjzwfnxozscf • Automatic extraction hood: 3 positions + excluded position • Drilling Unit – F23L • 13 independently selectable vertical spindles • 5 horizontal drilling heads with double output (3 in X, 2 in Y) • Drilling spindle speed: 4,200 rpm (standard) / 3,000–8,000 rpm (with inverter) • Integrated saw blade in X; max diameter 125 mm; thickness 2.2–6 mm • Blade speed: 5,000 rpm (standard) / up to 10,000 rpm (with inverter) • Drilling motor power: up to 3.9 kW • Max drill length: 70 mm; spindle spacing: 32 mm; Weldon Ø10 mm tool connection • High-pressure air assistance: >64 kgf per spindle • Tool magazines (total up to 28 positions) • TRB14: 14 tools; max tool Ø 300 mm (3-axis) / 350 mm (5-axis); max tool weight 8 kg • FAST14: 14 tools; max Ø 225 mm (saw) / 180 mm (circular tools/angle aggregates); max tool weight 8 kg • Worktable and clamping • 6 × TV FLEX 1600 tables/bars; pneumatic lock/unlock • Automatic reference stops: 6 rear, 6 intermediate, 4 lateral • Additional front stops H=75 • 4 pneumatic panel lifting devices H=75 • Pendulum machining capability • Vacuum clamping system • Vacuum equipment • Vacuum pump: 250 m³/h • 18 fixed cups: 145 × 145 mm, H=75 mm • 6 rotating cups: 145 × 55 mm, H=75 mm • Measuring / positioning • Automatic tool length sensor • Dual laser positioning (one projector per working area) • Automatic workpiece positioning references • Control & software • Maestro Active CNC HMI; Maestro CNC CAD/CAM • DXF import; PGM import / conversion to PGMX • Parametric programming; Tool Manager; Maestro APPS • Graphical worktable setup; collision checking; cycle-time estimation • Remote assistance capability; network connection • Operator console • eye-M PRO integrated industrial PC, 21.5" Full HD touchscreen (1920 × 1080) • Intel i7 2.80–3.60 GHz; 8 GB DDR4 RAM; 500 GB HDD • Ethernet RJ45; USB 3.0 • Wired TECPAD 7" remote control; cable length 6.5 m • Installation data • Installed power: 23–28.5 kVA; 400 V; 50 Hz; 3 phases • Air consumption: 450 Nl/min • Extraction air speed: 30 m/s; extraction connection Ø 250 mm Additional equipment • Tool holders and collets: not included in the offer • No other external accessories (robots, automation, chip conveyor, bar feeder, etc.) are specified as included

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Redpfx Asmiik Tjdzscf Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: excellent (used), Year of construction: 2007, I sell the double end cutting and tenoning machine SCM CONCEPT NT. Working width up to 3000mm Configuration left side / fix: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Rjdpfx Astv Rxbsdzjcf Configuration right side / moving: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 19,857 h, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Z-axis travel: 180 mm Milling unit power: 15 HP Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT Worktable with traverse Auxiliary unit for heavy parts Rodpfsx Sri Iex Adzscf Pneumatic clamps for door and window production Vacuum pump 250 m3/h Automatic lubrication Waste conveyor

Year of construction: 1996, condition: excellent (used), working width 230mm Redpfxelx Ei Rj Adzocf working height 120mm 8 heads arrangement of heads: bottom (grooved)/right/left/right/top/top/bottom/universal head adjustment in two axes spindle diameter 40mm smooth adjustment of the feed speed digital displays of working dimensions electric adjustment of the pressure beam, left and upper heads pneumatic clamps of the pulling rollers grooved top

Condition: excellent (used), working width 230mm working height 120mm 4 spindles Rcjdpfx Adjyxd Hfszsf spindles diameter 40mm pneumatic pressure of feeding rolls two axes heads regulation two feeding speed delta/star start electric regulation top head

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: AA10000992, functionality: fully functional, TECHNICAL DETAILS Table length: 5,020 mm Table width: 1,380 mm Working area X-axis: 5,020 mm Working area Y-axis: 1,300 mm Working area Z-axis: 250 mm Travel range X-axis: 5,400 mm Travel range Y-axis: 1,650 mm Travel range Z-axis: 450 mm Rjdpfxszrmqke Adzecf Vector speed X/Y: 35 m/min Maximum speed X-axis: 25 m/min (?) Rapid traverse speed X-axis: 90 m/min (?) Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Number of milling spindles: 2 pcs. Tool clamping system: HSK-F63 Milling spindle 1 Controlled axes: 3 pcs. Spindle speed: 6,000–18,000 rpm Main motor power: 15 kW Milling spindle 2 Controlled axes: 3 pcs. Spindle speed: 600–24,000 rpm Main motor power: 12 kW Tool changer positions: 12 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 4,500 x 3,000 mm Total weight: 7,500 kg Machine control: KVARA Operating system: Windows Embedded Standard 7, 64-bit Processor: Intel Pentium, 2.9 GHz RAM: 8 GB DDR4 Hard disk storage: 500 GB, 7,200 rpm Software: XILOG MAESTRO / SCM Maestro Vacuum pump Manufacturer: Becker Number: 1 pc. Motor power: 5.5 kW Suction capacity: 250 m³/h Maximum vacuum pressure: 0.9 bar EQUIPMENT Sliding table 2 vacuum fields 2 reference cams 8 reference noses 8 supports Becker vacuum pump Safety bumper XILOG-MAESTRO software package CE marking