Used Scm Accord for sale (609)

Condition: new, - NEW -GENERAL FEATURES:machine frame and worktable* steel structure with electrical cabinet at the front of the machine* sanding belt infeed from the left side of the machine* motorized table height adjustment* main motor integrated in the machine frameelectrical equipment* electromechanical control panel on the front left side of the machine* automatic star-delta start for the main motor* motor protection switch for the motors* motors in insulation class IP 54emergency and protective devices* Safety microswitch for excess thickness* Automatic brake for immediate stopping of the units* Emergency stop safety edge in the workpiece infeed* Mushroom switch in the workpiece infeed and outfeed* Lockable main switch* Automatic emergency shutdown of the machine in the event of:- sanding belt breakage- untensioned sanding belt- protection against lateral movement of the sanding belt- lack of compressed air- overload of the main motorsNote: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list).BASIC MACHINE STANDARD EQUIPMENT- R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos.- R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos.- Hard sanding pad with manual adjustment of the working height- Main motor 11 kW (15 HP)- Electronic ammeter for the main motor to display the power consumption- Electronic display of the working height- Electronically controlled sanding belt oscillation- Rubber pressure rollers- Kickback protection in the infeed in front of the first unit- Rubber feed carpet 60 Sh- Roller table with two rollers in the infeed and outfeed of the work table- Carpet feed with two speeds 4,5 / 9 m/min withgeared motor- automatic carpet centeringworking width mm 1.100Min./Max. working height mm 4 - 170Sanding belt width mm 1,115Sanding belt length mm 2,150Main motor power kW (HP) 11 (15)Gear motor kW (HP) 0.45/0.8 (0.6/1.1)Feed speed m/min 4.5/9Consisting of:10.90.87 European Safety Regulations(Mark C.E.)93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz44.44.19 Version "B" for RCS33.31.50 Roller table in infeed and outfeed for long workpieces62.44.50 10" control panel with "eye-S" software integration31.21.60 "RA" inclined ribbed steel contact roller - 1st unit97.50.71 Main motor 15 kW (PS 20) Dodpfjvwfrnsx Afnokh

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Dodpfx Afjvxr S Rjnokh

Condition: new, exhibition machine Technical specifications: Working width of machine table [mm] 520 Total length of machine table [mm] 2750 Front table length [mm] 1550 Rear table length [mm] 1200 Shaft diameter [mm] 120 Planer shaft speed [rpm] 5000 4 knives [mm] 35x3x520 Aluminum planing fence [mm] 1200x190 Swivel range of the planing fence from 90° to -45° Table height from floor [mm] 845 Diameter suction hood [mm] 120 Maximum chip thickness [mm] 8 Controls/Functions - Manual adjustment of the front table - Display of chip thickness on scale Security/Protection - Planer shaft protection with parallelogram adjustment below the  Working line (CE version) - "Boomerang" cutterblock protection (versions with electric  protective devices) - Insertion work not possible (CE version) - Lockable main switch - Thermal protection switch - 110V auxiliary circuit - Automatic engine brake (CE version) - Emergency stop button - CE declaration of conformity (CE version)   fixtures - Complete planer shaft and knife holder with markings as a positioning aid  with setting gauge for planer knives - Service key set - Motor with direct connection :  (S1): 4kW 5.5hp 50Hz (4.8kW 6.6hp 60Hz)  (S6 -40%): 5kW 7hp 50Hz (6kW 8hp 60Hz) 109999 Execution according to safety regulations No. 1 R11163 nova f 520 version CE 930731 volts 400 EU 931201 Frequency 50 Hz 555014 P1 version - CE and electrical protections Motor power 7kW 50 Hz with automatic star-delta switch Dodsvwf Amepfx Afnjkh   570127 Additional folding stop for processing thin parts 570135 TERSA cutterblock with insert knives Complete with a set of knives 083250 base 109993 MACHINE LANGUAGE: German

Condition: used, Year of construction: 2007, used, top equipment, including new outfeed rollers with Tersa knife shaft large planing height Brand: SCM Type: S630 E - Linvincibile Year of manufacture: 2007 Machine no.: AB/184684 GS tested CE type-tested GS wood dust tested Increased motor kW 7.5 Planing width approx. 630 mm Planing height approx. 300 mm Table sliding roller 2 pieces adjustable Chain pressure bar Chain feed roller Rubber outfeed roller 2x new Feed up to 20m/min stepless Number of knives 4 automatic motor brake Knife system - Tersa reversible knives Dkedpswqg R Dsfx Afnoh Digital display for planing height electric height adjustment Extraction connection 160 mm Space required approx. 1400 x 1000 x 1200 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition, as inspected, without guarantee and warranty

Condition: used, Year of construction: 1992, used Manufacturer: SCM Model: Compact 220 S Year of manufacture: 1992 Machine No.: 110830 GS-certified for wood dust Number of spindles: 4 Dkodpfxow En H Ns Afneh Spindle arrangement: bottom–right–left–top Motors: 4–5.5–4 kW Planing width approx. 220 mm Planing height approx. 120 mm Spindle diameter: 40 mm Table length approx. 2500 mm Cutterhead system: Tersa 230/125 Pre-milling cutter Pneumatic roller pressure Infeed before the jointer Feed speed 5–20 m/min Profiling Sliding rollers Extraction connection 4 x 120 mm Required space approx. 3000 mm x 1400 mm x 1600 mm Weight approx. 1500 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition, as inspected, without guarantee or warranty.

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Dkedsvxr Skspfx Afnjh

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Dedevwfmlspfx Afnekh

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KK00024496, cutting height (max.): 100 mm, saw blade diameter: 315 mm, planing width: 300 mm, milling spindle length: 100 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, overall weight: 408 kg, number of planer blades: 3, input voltage: 400 V, power: 3 kW (4.08 HP), Further technical data: 50 Hz motor frequency Circular saw with saw blade tilting 90°–45°, speed 3500 rpm Spindle moulder tilt 90°, speeds 3500/7000/10000 rpm Milling table opening in mm: 180 Milling fence for max. tool diameter 210 mm EURO safety guard for moulder 3-knife Tersa planer cutterblock Planer table length 1300 mm Max. planing depth 3 mm Thicknessing height 4-220 mm Thicknesser feed speed: 7 m/min Sliding table, cutting length 1600 mm Anodised sliding table Extension table Extension table crosscut fence extendable up to 1600 mm Dsdpeyf Azmefx Afnskh Extraction connection diameter in mm, circular saw/upper saw guard: 120/60 Extraction connection diameter in mm, moulder fence/moulder: 120

Condition: new, Year of construction: 2024, Working width: 520 mm Dsdpfxjvadxle Afnjkh Planing shaft: Tersa Number of knives: 4 Planer table length: 2300 mm Dressing fence angle adjustable: yes Folding up the dressing tables: pneumatic Maximum passage thickness of thickness planer: 250 mm Thicknessing table height adjustment: electric with position control Planer thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Pull-out roller: Rubber Pressure bar: jointed Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Suction connection: 160mm Machine length: 2300 mm Machine width: 1100 mm weight: 980

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Edge banding machine - R0.03.61 composition "T-ER1" - 62.15.01 "AUTOSET" - 62.14.93 Pre-heating panel - 62.12.03 Anti-adhesive unit "AAR" - Rectification unit "RT-V1" - 62.15.06 Glue pot "SGP-E" - 62.13.49 Sawing unit "K-2 radius" - 62.15.02 Nesting kit - Milling unit "R-K" - Corner rounding unit "ROUND 1" - Belt scraping unit "RAS-V" - 62.12.61 Spraying unit for band finishing Dsdpfxsx Rcu Eo Afnjkh - 62.15.04 Glue scraping unit "RC-N"

Condition: new, Year of construction: 2022, Working width mm 520 Cutterblock diameter / no. of standard knives mm/n. 120 / 4 Dimension of standard knives mm 520 x 30 x 3 Max. stock removal mm 5 Dkedpfx Asygtvkjfnsh Thicknessing table dimensions mm 520 x 775 Feed speed on thicknesser m/min 5 / 8 / 12 / 18 Min. ÷ max. working height on thicknesser mm 3 ÷ 240 Three-phase motors starting from kW/Hz 7 (9) / 50 (60)

Condition: new, Year of construction: 2022, Working width mm 410 Dedpfoygtuajx Afnskh Cutterblock diameter / no. of standard knives mm 95 / 4 Dimension of standard knives mm 410 x 30 x 3 Max. stock removal mm 5 Surfacing tables total length mm 2200 Three-phase motors starting from kW/Hz 5 (6) / 50 (60)

Condition: new, Year of construction: 2022, Work table dimensions mm 1950 x 180 Dkedoygtr Sjpfx Afnoh Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 2 Max. thickness of edges in strips mm 5 Min. ÷ max. panel height mm 12 ÷ 50 Min. panel length/width mm 180/65 Feed speed m/min 6

Condition: excellent (used), Wide belt sander SCM Sandya CLK + Vacuum Working width: 1100 mm Working height: 3–160 mm Dkjdeyhfnnjpfx Afnsh Number of sanding units: 2 Calibrating roller: rubber-coated Combi unit with sanding shoe Main dual-speed motor: 12/15 kW Optical oscillation Satin-finish brush at machine outlet

Condition: excellent (used), SCM 350 Multi-Purpose Machine – Panel Saw, Thicknesser Thicknesser: Width: 35 cm, Max height: approx. 220 mm, 3 knives, 1 feed speed, Jointer: Width: 35 cm, Table length: 180 cm, 3 knives, Tilting fence, Spindle moulder: Shaft diameter: 30 mm, Spindle adjustable up-down and tilting, 4 speeds, Side sliding carriage, Adjustable fence, Dkjdeyhdcdopfx Afnsh Saw: Adjustable up-down and 0-45°, Side sliding carriage, Rule on side carriage, Scoring unit, Max blade diameter 300 mm, Cutting height with 300 mm blade – 90 mm, Horizontal borer: Table adjustable up-down, front-back and left-right, The machine has 3 motors, each 3 kW, 380V power supply, Used machine in very good condition, ready to work, Solid multi-purpose machine.

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. Dkjdpfoyftzkex Afneh • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. If customer wishes it can be seen working. Dkodpfx Ajxn Um Ssfnjh

Condition: used, machine/vehicle number: 007855, Position 1: Single Edgebanders SCM-STEFANI KD Position 2: Panel Return Systems SCM-STEFANI KD Dkjdsyhml Iepfx Afneh

Condition: used, Year of construction: 2006, Empty weight: 4.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-05-25 - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 Djdpfx Aox Hfikjfnjkh - CNC options: Offcut conveyor, Manual control - Table length [mm]: 3050 - Table width [mm]: 1240 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Dkjdpfx Asx A Ti Ijfnjh Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008118, main blade diameter: 315 mm Scorer: yes Dksdpfx Afeyhbmgensh

Condition: used, machine/vehicle number: 007853, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Dedpoyhbkxsfx Afnokh Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007854, Max. panel width: 1200 mm Max. panel length: 2500 mm Length of conveyor: 9000 mm Dkedpfx Afeyhbh Roneh Panel return for edgebander: Left

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Dkedpfju T Tuwjx Afnjh Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: excellent (used), Year of construction: 2014, Used edge banding machine from business liquidation STEFANI One Touch - Year of manufacture: 2014 - including BARBARIC return system from 2016 Dksdpfxjx Tcwfe Afneh - immediately available We are happy to answer any questions you may have.