Used Schuko for sale (51)

Condition: as good as new (ex-display), Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Bedpsvwflnefx Agzold

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Bjdpfxsvxlqme Agzeld Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: used, Year of construction: 2000, used, top condition, low hours Make: Schuko Model: TSK 250 CE Year of manufacture: 2000 Blodpfx Ajycxh Rogzjd Machine no.: Motor: 7.5 kW Connection diameter: 250 mm Pressure approx. 2725 m³/h Air flow rate: 4595 m³/h Steel impeller Belt drive Vibration dampers Space requirement approx. 1300 x 700 x 1300 mm Weight approx. 200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-inspected condition, without warranty or guarantee.

Condition: used, used, in good condition, low hours Make: Schuko Model: L 400 Machine No. 0390 For shavings / wood chips Slow-running approx. 1400 rpm Motor: 11 kW Connection diameter: 400 mm Pressure approx. 1836 m³/h Air output: 11,760 m³/h Steel impeller Space requirement approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, Bedsycxh Dspfx Agzold without warranty or guarantee

Condition: used, Year of construction: 2002, Used, in excellent condition Make: Schuko Model: Vacomat 12/14 Blsdjycxhqspfx Agzed Year of manufacture: 2002 Machine no.: 13137 Clean air / negative pressure unit GS dust-tested CE type-tested Motor: 2.2 kW Connection diameter: 140 mm Pressure: 2,800 Pa Air capacity: 1,350 m³/h Collection bins: 1 pc Filter cleaning: manual-mechanical Filter pressure indicator Required space approx. 1,500 x 900 x 2,200 mm Weight approx. 230 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: used, used, in good condition, low hours Manufacturer: Schuko Type: L 350 Machine no.: 0-90390 Slow runner, approx. 1400 rpm Motor: 11 kW Connection diameter: 350 mm Pressure approx. 2229 m³/h Airflow: 9640 m³/h Bljdpfx Aoycxgyjgzod Steel impeller Required space approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1061276, functionality: fully functional, filter area: 50 m², total height: 2,760 mm, total length: 1,520 mm, total width: 1,520 mm, operating pressure: 6 bar, Submission of a bid obligates timely collection by 27.02.2026! TECHNICAL DETAILS Filter area: 50 m2 MACHINE DETAILS Control type: 24 or 230 V Opening/closing time: max. 2 s Operating pressure: 6 bar Dimensions (L x W x H): 1,520 x 1,520 x 2,760 mm EQUIPMENT Blodpfx Ageyfn Sdozjd Sendzimir-galvanised pipe components Shaped parts Machine connections Flame-retardant antistatic PU spiral hoses Hose cuffs Pipe clamps Mounting material for conveying chips and dust from 7 woodworking machines Pneumatic shut-off slides Slide housings made of die-cast aluminium

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Blsdpfsxan Utox Agzod Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Rotor width 700 mm Blsdpfx Agjwv Hmvozod Motor 11 kW Screen with 16 mm perforation No PLC installed yet Partially overhauled New rotor bearings

Condition: good (used), Year of construction: 1994, Air volume: 6610 m³/h Blsdpfxjvw S R Do Agzed Motor power: 7.5 kW Static pressure: 1930 Pa Connection inner diameter: 300 mm

Condition: excellent (used), functionality: fully functional, motor power 11kW bin dimensions 940x700mm hydraulic pressure unit shaft length 700mm shaft speed 110 RPM capacity 180-220 kg/h Blsdpfx Aoyhdl Ssgzjd

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Year of manufacture 1997 Volume flow 2950 m³/h 200 mm suction nozzle Motor 3.7 KW, 400 Volt Technically in very good condition Bedpfxov A Rv As Agzsld

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 10866888, functionality: fully functional, operating hours: 18,000 h, input voltage: 380 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 37,000 m³/h, suction capacity: 37,000 m³/h, intake manifold diameter: 600 mm, filter area: 1,087 m², noise level: 82 dB, total height: 5,785 mm, total length: 6,500 mm, total width: 4,500 mm, overall weight: 5,850 kg, compressed air connection: 6 bar, control voltage: 380 V, extraction nozzle diameter: 630 mm, inlet: 630 mm, nominal flow rate: 37,000 m³/h, nominal power: 60 kW (81.58 HP), sheet thickness aluminum (max.): 2 mm, space requirement height: 5,785 mm, space requirement length: 12,000 mm, space requirement width: 6,000 mm, Equipment: CE marking, Dust collector SCHUKO with Goldcone cartridge filter. 2 x 30 kW ventilators Bljdpfsxuftvex Agzjd Still in use in our workshop in Brussels, BELGIUM, until we move to our new building in September 2026. Only available in September 2026.

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm Bledper R Ewlefx Agzsd - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Year of construction: 2000, functionality: fully functional, Schuko industrial fan Radial fan, chip extraction blower, ventilator, extraction unit, chip blower, high-performance fan Motor output: 15 kW - Airflow: 12,600 m³/h - Total pressure: 2,300 Pa - Inlet connection: Ø 400 mm - Outlet connection: Ø 400 mm - Dimensions: Length 1300 mm, Width 850 mm, Height 1650 mm - Weight: 335 kg Bledowahluopfx Agzjd Location: Dortmund Price ex location, loaded free on truck

Condition: ready for operation (used), Year of construction: 1991, Volume flow: 1550 m³/h Blsdsvitd Aopfx Agzsd Pressure difference: 1000 Pa Drive motor: 400 V, 2850 rpm, 1.5 kW Intake nozzle diameter: 150 mm Space required: 1100 x 500 x 2450 mm Weight: 133 kg

Condition: excellent (used), functionality: fully functional, Saw dust extraction unit SCHUKO STA 5.5 kW Width: 2200 mm Height: 3600 mm Depth: 1100 mm Bag length: 200 cm Bledpfx Ajx I N A Dogzjd Filter sleeve diameter: 140 mm Number of filter sleeves: 54 pcs Collection bags: 3 pcs Collection bag diameter: 500 mm Suction port: 250 mm Main motor power: 5.5 kW Filter bag shaking system Extraction pipes included

Condition: excellent (used), functionality: fully functional, motor power 11kW bin dimensions 940x700mm hydraulic pressure unit shaft length 700mm shaft speed 110 RPM Blsdpfx Asyabb Uogzed capacity 180-220 kg/h

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 14522359, functionality: fully functional, input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, intake manifold diameter: 160 mm, filter area: 9.5 m², noise level: 69 dB, total height: 2,130 mm, total length: 1,715 mm, total width: 900 mm, overall weight: 345 kg, nominal flow rate: 1.447 m³/h, negative pressure: 2,200 Pa, Used Schuko extraction unit Vacomat 140/160 XPe Bjdpfx Ajt D U Eyjgzjld Extraction connection D = 160 mm, Filter area 9.5 m², Dust class "M", Test certificate H3/BGHM HO 193023, Motorized filter regeneration, Motor power 2.2 kW, Nominal air flow 1,447 m³, Optionally available: 1 gate control with automatic start €890.00 + VAT, Ex location Seevetal, without transport, Subject to prior sale.

Condition: good (used), Year of construction: 1993, Offer 24299 Technical data: Blsdjt Hurxjpfx Agzsd - Volume flow approx. 2170 m³/h. - Dust bag / chip bag up to 170 L - Connection spigot 160 mm - Connection spigot adapter 2 x 100 mm - Drive power 400 V / 2.2 kW - Space requirement W 1200 x H 1900 x D 550 mm - Weight approx. 85 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, volume flow: 18,000 m³/h, filter area: 120 m², Filter hose length 2000 mm Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Gear motor 2.2 kW Connection for briquette press with air recirculation Bljdpfx Aewhlkwsgzed

Condition: excellent (used), Year of construction: 2014, overall weight: 500 kg, power: 3 kW (4.08 HP), PLC control with touch panel Briquetting capacity 80 - 100 kg/h Conveyor screw Ø 130 mm Internal connection Ø 160 mm Blodpfx Agswhv Imozsd Diameter of chip briquettes 60 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 9,000 mm, Overall length: approx. 9000 mm Conveying length: approx. 7000 mm Width: approx. 300 mm Height: approx. 280 mm Screw diameter: approx. 180 mm Motor: 1.1 kW Bledpfjw Rpygox Agzsd

Condition: good (used), Year of construction: 2003, The painting unit with heat exchanger and blowing for drying was used in the production of stairs and carpentry elements Paint wall also with extraction in the floor with a total length of about 7 mb equipped with three extraction fans Bedpfx Asuyy A Dsgzold

Condition: excellent (used), Height 250 Width 95 Length 220 Year 1992 Engine 2.2 kW Pneumatic-mechanical shaker Bjdsxpvt Nspfx Agzeld