Used School Maschine for sale (1,695)

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Ijdpfjxtfv Isx Ag Ujht Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Condition: new, Year of construction: 2025, The manufacture of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our experience and attention to our bending machines, thanks to which we can continue to improve our folding benches, so we don't forget who we really work for. The quality of our bending machines is very important to us. Bending machine ZGR-2140 / 1.2 Warranty: 12 months. Ihjdpfjb Na Eqox Ag Uet Certificate CE Eccentric pressure that is shifted to both sides of the machine Working length: 2140mm STEEL SHEET 1.2 mm Non-ferrous metals 30% more sheet thickness Folding beam: 24 mm Bending angle: 145 degrees Cutting along the entire working length, Lifting the upper cheek in three positions, maximum clear width between the side panels 80 mm rear frame for holding sheet metal, front cutter limiter to ensure the specified cutting width, We are looking forward to your contact!

Condition: new, Year of construction: 2025, ZGR-1400/1.2mm Our products are best quality and have certificate CE. You are buying directly from manufacturer ! Sheet Folding Machine ZGR-1400\1.2 Technical data: - Maximum working width: 1400 mm Ihedpfecpn E Ajx Ag Ujt - Sheet gauge up to: 1,2 mm (Steel) - Aluminium Plate 1,7 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 15 mm - Protractor - Weight: 150 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) - The machine have certificate CE and 12 months warranty.

Condition: new, Year of construction: 2025, Bending machines from "Prod-Masz" - CE tested quality! Ihjdpsb Hxzysfx Ag Uot ZGR-2140L/0.8 Bending angle: 160 degrees Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - Angle indicator - Weight: about 180 kg - The machine complies with CE guidelines and has a 12-month guarantee. - Roller scissors – max. cutting capacity 0.8 mm (sheet steel) plus 350 euros Price: €1,500.00 Delivery costs: please ask Delivery: every week Invoices are issued either with 0% of VAT as an intra-community delivery or with 23% of VAT. We are looking forward to your contact!

Condition: new, Year of construction: 2025, We are a production company that is constantly developing dynamically thanks to the professionalism and commitment of our employees. Thanks to the experience we have gained, we are able to offer the best and highest quality solutions in the field of production. The folding bench ZGR - 4140 mm 0.8 mm incl. Roller shears and hand folding machine - Working length: 4140 mm - bending capacity: up to 0.8 mm (sheet steel) - Bending angle: max. 150 degrees - Folding beam thickness: 30 mm - Upper beam stroke: 80 mm - Weight: approx. 1000 kg - Lifting the top beam in three positions Furnishing: - Roller shear 0.8 + 350 Euro Ihjdpfxech Tkvj Ag Ujt - Degree scale - Angle stop - rear frame to hold the sheet - hand folding machine Price: 6 550 euros Please contact us if you are interested.

Condition: used, Year of construction: 2007, Double-spindle machining center in 5-axis design (on both sides) Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle distance 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions HSK 63 tool holder CNC control Siemens 840D 1 x tool breakage control 2 x clamping bridge support H75 mm 2 x clamping bridges 5th axis Ijdpfxetgu Ixj Ag Ujht Knoll coolant system, 70 bar 1 x chip conveyor KB1000 1 x drill head indexing 2 x tool planning system control 2 x A/U axis torsion compensation upgrade kit

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HTAT055HE - 2200389046, cooling capacity: 111 kW (150.92 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,536 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 19 m³/h, pump pressure: 1.26 bar, total width: 1,110 mm, total length: 3,415 mm, total height: 2,270 mm, warranty duration: 3 months, Equipment: type plate available, Heat pump, air-cooled chiller Manufacturer: MTA S.p.A. Model: Taurus HTAT 055/HE – 130 / 111 kW The Taurus HTAT 055/HE units are compact heat pumps/chiller sets designed for outdoor installation, including hydronic kit (200 l tank + P15 pump) for low ambient temperatures down to -20°C, equipped with electronic fan speed control (EC fans). Heating capacity (kW): 130 Heating water outlet/inlet temperature: 45 / 40°C Flow rate (m³/h): 22.5 Available pump pressure (bar): 1.03 Ambient temperature (°C): +7 Cooling capacity (kW): 111 Chilled water outlet/inlet temperature: 7 / 12°C Flow rate (m³/h): 19 Available pump pressure (bar): 1.26 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 60 Max. current (A): 98 Starting current (A): 312 Protection class: IP54 Dimensions: Length (mm): 3,415, Width (mm): 1,110, Height (mm): 2,270 Weight (kg): 1,536 Connection: Rp 2 1/2" Serial No.: 2200389046 Year of manufacture: 2022 Condition: Cosmetic: 2, Technical: OK Used (Subject to technical changes and prior sale!) Ihedpfex Itfcex Ag Uot Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2018, tank capacity: 32,300 l, GENERAL Equipment: Crane lugs Design: upright Year of manufacture: 2018 Remarks: Double jacket with dispersing ring – suitable for non-pressurized temperature control only; maximum sterilization temperature inside tank 145°C; overall height specified per drawing External diameter: 3,000 mm Internal diameter: 2,785 mm Total height: 8,100 mm Ihodox Dmckjpfx Ag Uot Heating/cooling: present Max. permissible operating temperature: 50°C Max. overpressure: 3.5 bar Support type: height-adjustable feet Location: outdoor storage Technical documentation: drawing, acceptance certificate, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 32,300 liters Double jacket volume: 4,700.0 liters Cylinder wall thickness: 7.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,500 mm Last application: sterile tank in a dairy VESSEL Max. permissible operating temperature: 50°C Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control lower bottom: double jacket EQUIPMENT Manhole/dome: on upper head (DN 500) Outlet: present MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Lower bottom wall thickness: 7.5 mm Upper head wall thickness: 9.5 mm

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance Ihjdpfxjin Ewle Ag Uet - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET201P3-20 - 2200398601, cooling capacity: 44.2 kW (60.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 998 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 7.53 m³/h, pump pressure: 2.67 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller unit, Type: TAEevo Tech 201P3-20 – 44.2 kW Chillers, MTA S.p.A. Ihedpfx Asxc Ip Nsg Ujt Chiller, water chiller unit, cooler The TAEevo Tech 201 P3-20 is an air-cooled compact water chiller designed for outdoor installation (from -5°C to +46°C). Includes crankcase heater, phase monitoring, 350-liter buffer tank, and integrated P3 circulation pump. Chilled water outlet temperature adjustable from -10°C to +30°C. Cooling capacity: 44.2 kW Chilled water temperature (outlet/inlet, °C): 7 / 12 Flow rate (m³/h): 7.53 Available pump pressure (bar): 2.67 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption: 23.69 kW Max. current: 39.83 A Starting current (circuit): 134.4 A Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 998 Connection: Rp 2" Serial number: 2200398601 Year of manufacture: 2023 Condition: Visual: 2, Technical: OK (tested) Used Price: on request in euros (plus VAT, ex works Nettetal) Used machines may have visual defects due to use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET101P3 - 2200396177, cooling capacity: 27.5 kW (37.39 HP), type of input current: three-phase, type of cooling: water, overall weight: 637 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 4.68 m³/h, pump pressure: 2.54 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, Equipment: type plate available, Process Air Cooler / Chiller / Air-Cooled Chiller Unit Manufacturer: MTA S.p.A. Model: TAEevo Tech 101 P3 – 27.5 kW The TAEevo Tech 101 P3 are air-cooled compact water chillers designed for outdoor installation (operating range: -5°C to +46°C). Features include crankcase heater, phase monitoring, 255 l buffer tank, and integrated P3 pump. Adjustable chilled water outlet temperatures from -10°C to +30°C. Ijdpfx Agex Ib Uxe Usht Cooling capacity: 27.5 kW Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 4.68 Available pump pressure (bar): 2.54 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V Frequency: 50 Hz Phases: 3 Maximum power consumption (kW): 14 Maximum current (A): 25 Starting current (A): 123 Protection class: IP54 Dimensions: Length (mm): 1862 Width (mm): 761 Height (mm): 1437 Weight (kg): 637 Connection: Rp 1"1/2 Serial number: 2200396177 Year of manufacture: 2023 Condition: Visual 2, Technically OK Used Price: on request in EUR (plus VAT ex Nettetal) Used machines may show visual signs of wear due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2025, We provide our customers with a modern and comprehensive service in the field of building sheet metal working machines. Long-standing employees guarantee continuity and a high quality standard. Thanks to ongoing training, they meet the high requirements. Folding bench ZGR 2640/0.8 Guarantee 12 MONTHS. Certificate CE 2640mm working length STEEL SHEET 0.8 mm Bending angle 145 * shearing along the entire working length, raise the upper cheek in three layers, maximum clear width between the cheeks 80 mm rear rack for holding sheet metal, Servo motors for lifting the cheeks, cutting limiter at the front to ensure the specified cutting width, Roller scissors - with adjustment of the scissors guide and rollers made of high-alloy steel of very high resistance to wear. This allows sheet metal to be cut over a very long period of time without the need for grinding the roller shears. The performance of the roller shears is about 40 km of sheet metal with a thickness of 0.5 mm - up to the first grinding. The roller shears can be sharpened an average of 35 times. The roller cutter weighs approx. 6.5 kg. Roller scissors plus 350 euros Manual folding machine plus 75 euros the weight 290 kg Delivery: every week We are looking forward to your contact! Iodpfechuylox Ag Uoht Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Isdpfxstr U Hls Ag Usht Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm Ijdpjttagdjfx Ag Usht The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage Ihedpottah Rjfx Ag Ust → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load Iedpfx Agjg Dvdcs Usht - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany Ihsdpegu Nmhofx Ag Uet The pictures show you an older machine

Condition: used, Year of construction: 2021, turning diameter over cross slide: 440 mm, turning diameter: 680 mm, center height: 340 mm, turning length: 3,000 mm, total length: 4,700 mm, total height: 1,450 mm, spindle speed (min.): 1,000 rpm, metric thread diameter (min.): 14 mm, bed width: 458 mm, rotational speed (max.): 1,000 rpm, rotational speed (min.): 12 rpm, type of input current: three-phase, swing diameter over bed slide: 680 mm, overall weight: 4,500 kg, quill mount: MK 6, spindle mount: MK 6, center height over top slide: 220 mm, EQUIPMENT of the used machine Machine No. WAG-C1-188 year of construction 2021 STANDARD EQUIPMENT : - Complete electrical equipment 400 V. / 50 Hz. - Chuck protection electrically fused - Quadruple tool holder or optional Quick change tool holder (Multifix system) - Rapid traverse in X and Z axis - Fixed steady rest - Moving steady rest - Complete coolant system - Spindle brake - Rear chip guard - Machine light - Operating tool and instruction manual - CE standard Additional equipment of the used machine - Three-axis digital display Article 601233 - 3-jaw chuck diameter 400 mm - Faceplate diameter 500 mm - Fixed steady rest 70 - 250 mm - Fixed steady rest 150 - 380 mm Quill ends adapted for sliding inserts Ihedpfx Ajw Rpd Eog Ust Article 601223 - Quick change tool holder head Multifix size C Article 605934 TECHNICAL DATA center height 340 mm Swing over bed 680 mm Swing diameter over cross slide 440 mm center width 3000 mm spindle bore 105 mm (option 155 mm) spindle nose ASA A1-11 (D-11) Number of spindle revolutions 12 spindle speed 12 - 1000 rpm. (opt. 10 -800 rpm for KK 15) Longitudinal feeds 0.05 - 0.7 mm/rev. transverse feeds 0.025 - 0.035 mm/rev. Bed width 458 mm cross travel 390 mm Top slide travel 255 mm Thread pitches: metric 0.8 - 14 mm Withworth Gg/1" 2 - 28 Module, mod. 0.5 - 7 Diametral Pitch, DP 4 - 56 Lead screw dia. 105 mm Number of stages 28 Tailstock quill MK6 Drive power 11,25 kW (opt. 15 kW) Transport dimensions 4700 x 1240 x 1450 mm weight 4500 kg Transport costs on request. You have the possibility to visit the offered machine in our demonstration center Renchen, by appointment.

Year of construction: 2007, condition: excellent (used), Vacuum unit VC999 07P BJ:2007. 400V connection. Dimensions chamber approx. 88x50x15cm, with 2x CLFH 220 Rietschle vacuum pumps. Bj:1998 Power 2x 5.5 kW. Very good condition, works perfectly. Isdpfof Srcfox Ag Uoht

Condition: used, Weight: 250 kg connection: pneumatic, 6 bar Device for the final assembly of grave crosses. Iedpelf H Uhofx Ag Ujht

Condition: new, Year of construction: 2025, bending angle (max.): 150 °, sheet thickness steel (max.): 1 mm, sheet thickness copper (max.): 1 mm, ❗❗ Electric sheet metal bending machine RED-3200/1.0/150* with recess ❗❗ Discover a new era in metalworking with our revolutionary sheet metal bending machine that harmoniously combines craftsmanship heritage with the latest technological developments. We present a machine that not only meets but exceeds your wildest expectations. Don't miss the chance to equip your workshop with a groundbreaking tool that eliminates the traditional difficulties of manual bending and offers unprecedented comfort and efficiency. Bending machine / bending machine / roofing machine Polish manufacturer PROD-MASZ / brand new directly from the manufacturer With our bending machine, equipped with an advanced electronic control system, precision and ease of use become standard. Now one push of a button starts the bending process and guarantees flawless results without unnecessary effort. Ihedpfx Agscv R Dko Uet Magnets attached to the bending beam ensure a stable position of the sheet metal and enable precise dimensional adjustment, which is the key to perfect shapes. The RED 3200/1.0 mm/150* offers an impressive maximum working width of 3,200 mm and the ability to bend steel sheets up to 1.0 mm thick, with non-ferrous metals achieving an additional 30% capacity. The maximum bending angle of 150 degrees and the ability to cut sheets across the entire working width push the boundaries of precision and efficiency. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. We look forward to hearing from you! -> We issue invoices

Condition: used, Year of construction: 1991, Plastic material Maxir Iodpfx Agsxuu T Eo Ueht Condition: Operational Type: VKc-50 Year of manufacture: 1991

Year of construction: 2016, condition: excellent (used), machine/vehicle number: E018769, REF: MM5949 1 x Vemag Process Check Weigher. Ihodpfx Aexflr Tjg Ujt Technical specification ⚙️ ✅ Manufacturer - VEMAG Maschinenbau GmbH ✅ Model - CHW-2000118. ✅ Type - 4717.275.30. ✅ Serial number - E018769. ✅ Date of manufacture - 2016. ✅ Electric supply - 400 V / 50-60 hz / 3 phase. Note 🗒️ Supplied with manuals.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: AST2 190HE-MWT - 2200370969, cooling capacity: 539 kW (732.84 HP), type of input current: three-phase, type of cooling: water, overall weight: 5,098 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 92.1 m³/h, pump pressure: 3.4 bar, total width: 2,191 mm, total length: 5,445 mm, total height: 2,423 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-Cooled Chiller Unit Type: Aries TECH AST2 190 HE-MWT – 539 kW Manufacturer: MTA S.p.A. The Aries TECH AST2 190 HE-MWT are compact air-cooled chiller units suitable for outdoor installation (from -20°C to +48°C), equipped with a shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crankcase heater, phase monitoring, P3 twin pump, 800-liter buffer tank, electric frost protection heater, EC fans, condenser filter, and control panel. Comes with a new condenser coil. Chilled water outlet temperatures adjustable from -10°C to +20°C. Cooling capacity (kW): 539 Chilled water temperature out / in (°C): 7 / 12 Flow rate (m³/h): 92.1 Available pump pressure (Bar): 3.4 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Number of capacity stages: 6 Electrical data: Voltage: 400 V, frequency: 50 Hz, phases: 3 Max. power consumption (kW): 261 Max. current (A): 431 Starting current per circuit (A): 636 Protection class: IP54 Dimensions: Length (mm): 5445, Width (mm): 2191, Height (mm): 2423 Weight (kg): 5098 (operating weight) Connection: DN 125 (Vitaulic) Serial no.: 2200370969 Ihedpfsx E S S Njx Ag Ust Year of manufacture: 2021 Condition: Cosmetic 2, Technically OK (Used machine) Price: on request in EUR (plus VAT, ex works Nettetal) – 3-month warranty Used machines may show visual imperfections due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2004, length 3,2 m width 1,1 m height 2,6 m weight 180 kg PEKAMS / MK MASCHINENBAU KITZ We have 11 industrial workbenches with skylight in stock in lengths of 2.5m - 3.8m. They are in good condition and are solidly built from aluminum profiles. Depending on the size, the net prices are between €1,900 and €2,100/pc. The table tops were protected by thick foils in previous use, so the surface is in very good condition. These workbenches have a spacious cable duct and can ideally integrate a large monitor. The complete wiring and design is very high quality and ideal for a representative workplace. Iedpfx Agstpdrdj Uoht Come to inspect the benches in Giebelstadt near Würzburg, about 80min. from FRANKFURT airport The following information about this version: - Solid design made of aluminum frame profile - Wooden table top 4.5 cm thick - Top condition, as there was previously a protective coating on it - with tilting and swiveling unit for monitor basic equipment: - spacious cable duct - with sliding doors and socket strip, with LAN - 1 skylight - 2 drawer cabinets Basic dimensions: 2.5 - 3.8 x 1.1 x 2.6m - weight approx. 180kg currently 11 pieces available Pickup only loading can be done with our forklift, free loaded on truck