Used Schaffer 3550 for sale (202)

Condition: ready for operation (used), turning length 500 mm Rsdoxmakyjpfx Abden turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: good (used), Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop -Length stop: for various machining options -Max. stop length: 2970 mm -Individual components: see photos Rsdpfxshablas Abdsn Accessories: incl. Haubold stapler -Dimensions: 3550/760/H1200 mm -Weight: 396 kg

Condition: good (used), Three-phase motor with 2 speeds, electric motor Rjdpfx Aefdqnhjbdsn -Power: 4/4 kW -Voltage/frequency: 220/380 V 50 Hz -Speed: 1460/2960 rpm -Voltage/frequency/power: 240/460 V 60 Hz 4.8 kW -Speed: 1760/3550 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP44 -Dimensions: 490/300/H330 mm -Weight: 71 kg

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Rsdpfx Asvuuhgobdon Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control >> Hydraulic tension vertical and horizontal Redpfx Abev Ed U Dsdjn >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws Rodpovv Etvefx Abden >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: reconditioned (used), Year of construction: 2003, Universal Lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE control (SIMATIC PANEL TOUCH SCREEN) Year of manufacture: 2003 Spindle bore: 52 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Cross slide travel: 185 mm Infinitely variable speed range: 14 – 3550 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck SCHUNK ROTA plus Ø 200 mm 2 sets of soft top jaws Coolant system Chip blow gun 6 machine feet Rsdjxn Ar Aepfx Abdsn Operating manual The machine is in very good condition!

Condition: ready for operation (used), Year of construction: 1998, pressure 120 t chamfer lenght 3050 mm distance between columns 2550 mm stroke of upper beam 155 mm throat 350 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 77.0 mm/sec Control "P 40" work height max. 878 mm table width 104 mm oil volume 150 l total power requirement 11.0 kW weight 7550 kg range L-W-H 3550 x 2150 x 2600 mm Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit "P40" Rjdpfxex Ni Ebe Abdsn * New price approx. 4.000 Euro * Control / movement of the backgauge - X axis (target/actual input) * Control / movement of the depth setting - Y axes (target/actual input) * Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) * with 2x manually adjustable stop fingers * including lateral and height adjustment (Z R axis) - 1x branded set of upper tools (split) - 1x branded Multi-V bottom die block - Lateral safety guard (hinged doors) - Rear safety guard (hinged door) - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: new, functionality: fully functional, maximum load weight: 3,000 kg, lifting power: 3,000 kg/m, Year of construction: 2025, Wood grapple for various forestry machines, farm loaders, wheel loaders, loaders, and other carrier vehicles (e.g.: H&R, JCB, Liebherr, Bobcat, Case, Kubota, Manitou, Schäffer, Zeppelin, etc.) The grapple has an opening width of approx. 1.2m. The rotator allows trunks to be rotated so that they can be picked up or put down precisely. The inclination is adjusted hydraulically so that it can be easily adjusted. Various mounting options are also available, e.g. Euro mounting, H&R standard mounting, etc. Individual adjustment is also possible. Other accessories for forestry machines, wheel loaders, etc. are also available from us. Please contact one of our trained consultants to receive an offer tailored to your needs. Rjdpfx Abjvygigsdjn We look forward to hearing from you! Your H&R GmbH

Condition: used, total length: 1,500 mm, total width: 750 mm, total height: 1,350 mm, Empty weight: 700 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 150 - Swing over bed [mm]: 300 - Carriage turning diameter [mm]: 160 - Distance between centres [mm]: 500 - Bed width [mm]: 210 - Spindle bore [mm]: 36 - Min. spindle speed [rpm]: 15 Redjx D Tlrjpfx Abdjn - Max. spindle speed [rpm]: 3550 - Transport dimensions: 1500mm x 750mm x 1350mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2000, with automatic stop The stop slides the material to be cut to the cutting position according to the entered measurement Saw blade: rising from below Rsdpfx Aex Srrvsbden Maximum saw blade diameter (mm): 300 right long table: with automatically adjustable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length – 3550 mm, roller conveyor width – 310 mm Roller width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without extraction system as shown

Condition: excellent (used), Year of manufacture: 2005 Serial number: 8293 Press force: 120 t Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Rjdjxna S Hepfx Abden Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm

Condition: good (used), Year of construction: 2000, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories (!!) Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) Rjdpex Emqyjfx Abdon - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front EMERGENCY OFF button - Operating instructions (PDF)

Condition: used, turning diameter over bed 280 mm turning diameter over slide rest 160 mm turning length 500 mm centre height 140 mm centre distance 500 mm spindle bore 36 mm spindle turning speed range 15 - 3550 U/min spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,008 - 0,560 mm/U feeds - cross 0,004 - 0,280 mm/U thread - mm pitch 0,2 - 12 mm dia. of leadscrew 24 mm Rsdpfex Ni Dkex Abdsn lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 90 mm tailstock adjustment out of the central pos. 15 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t - machine out of teaching shop - Accessories: DRO on 3 axis, 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head A, running center

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Rjdpfxox Urmlo Abden

Condition: excellent (used), turning diameter over bed 280 mm turning diameter over slide rest 160 mm turning length 500 mm centre height 140 mm centre distance 500 mm spindle bore 36 mm spindle turning speed range 15 - 3550 U/min spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,008 - 0,560 mm/U feeds - cross 0,004 - 0,280 mm/U thread - mm pitch 0,2 - 12 mm dia. of leadscrew 24 mm lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 90 mm tailstock adjustment out of the central pos. 15 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t Rodjwm Rmujpfx Abdsn dimensions of machine L x W x H 1,40 x 0,70 x 1,20 m - machine out of teaching shop - Accessories: DRO on 3 axis, 4-jaw chuck RÖHM 140 mmø, MULTIFIX-head A,

Condition: good (used), Year of construction: 1974, LZ-Lathe Fabr.Boley Type: 6 LZ Year 1974 Rsdpeqw U Uwsfx Abden Center height : 140 mm center distance : 500 mm spindle speed : 28-3550 rpm spindle bore : 32 mm collet chuck device, 3-jaw chuck, quick-change tool holder Parat. Machine documentation available, machine can be demonstrated under power.

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m Redeuqdzdepfx Abdsn

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Rjdpfxjqagugs Abdon

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 25062/1, Year of construction: 2016, operating hours: 7,158 h, load capacity: 8,000 kg, lifting height: 4,450 mm, load center: 900 mm, fuel type: gas, mast type: mono, construction height: 3,550 mm, motor manufacturer: VW, gearing type: hydrostat, fork length: 2,400 mm, front tire type: superelastic tires (black), empty load weight: 14,130 kg, Equipment: UVV, air conditioning, cabin, seat heater, sideshift, Standard telemast, construction height: 3550 mm, lift height: 4450 mm, load capacity: 8000 kg at load center: 900 mm, double pallet clamp with sideshift, fork length: 2400 mm, road lighting compliant with StVZO, LED work lights front and rear, fully enclosed cab with heating and air conditioning, front and rear cameras, VW LPG engine, manual transmission, monopedal, 6x solid superelastic tires, operator's manual included. Technical condition at sale: Forklift has been technically overhauled! Major maintenance just completed! Redex Rrv Espfx Abdsn UVV safety inspection passed flawlessly! Delivery: In immaculate condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Available at any time by prior appointment during business hours: Monday to Friday from 8:00 am to 6:00 pm. Saturday from 8:00 am to 1:00 pm. TRANSPORT: Low loader or curtain-sided truck available at low cost.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinker KC 8060/650 Universal Year of construction: 2014 Dimensions: approx. 3550 x 1350 x 1450 mm (LxWxH) Weight: approx. net 690 kg / gross 790 kg Technical data: Sealing frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Working height: 870 - 970 mm Passage height: 100 - 400 mm Power connection: 380 V three-phase current Easy-to-operate angle welding machine, combined with shrink tunnel. Redpfx Absx H R Niodon Particularly robust design for industrial use. Welding frame dimensions 800 x 600 mm. Proven impulse welding technology with Teflonized cut-off welding wire for absolutely odorless operation. Equipped with locking mechanism as automatic pressure mechanism for precise adherence to the set welding time and for easy for problem-free cut-off welding even of thick films. Viewings and demonstrations are possible on our premises by prior arrangement. Function guarantee, no warranty

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Tool holder SK40 Rsdsrvitljpfx Abdon Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Redpfxoxdt Ums Abdjn Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Rsdpfxjwntqxo Abdjn Stroke: 550 mm Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1972, Center height 265 mm Center width 1000 mm Swing diameter over bed 540 mm Swing diameter over cross slide 280 mm Bed width 403 mm Spindle bore 65 mm Spindle mount DIN 55027 Gr. 8 Speed range, 24 levels 9 – 1800 rpm Feeds, 32 longitudinal 0.063 – 2.24 mm/rev ditto, 32 face 0.032 – 1.12 mm/rev 66 metric threads 0.25 – 560 mm 60 Whitworth threads 80 – 1/16“ 60 module threads 0.1 – 50 module 40 diametric pitch threads 160 – 0.5 pitch Tailstock mount MK 5 Drive power 15 kW Dimensions L x W x H 3550 x 1300 x 1550 mm Weight 2800 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Redpfopmtf Uex Abdsn