Used Scales for sale (2,261)

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm Fpjdju N Dz Aopfx Aivon *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. Fpedpfeu Icp Aox Aiven *

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° Fodpfox Adbnsx Aivepn number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, planing width: 530 mm, tool diameter: 125 mm, number of blades: 87, rotational speed (max.): 4,700 rpm, total length of planing tables: 2,900 mm, total width: 1,380 mm, total height: 850 mm, overall weight: 800 kg, Equipment: CE marking, Surface planer DMA with spiral cutterhead, 3 rows, 87 indexable inserts, insert dimensions 15x15x2.5mm. Infeed table 1625mm, outfeed table 1230mm, cutterhead diameter 125mm, cutterhead speed 4700 rpm. Working height 850mm. Robust fence, adjustable in depth and swiveling 90°-45°, inclination is easily readable from the front, thanks to round bar guidance and additional roller bearings, allowing for smooth adjustment. Fence dimensions 1300x170mm. Dust extraction port diameter 160mm, maximum chip removal 8mm. Fjdpfx Aez Eyp Reivopn Swiveling control panel located at eye level on top. Chip removal adjustment via scale with manual setting. Stable steel-gray cast iron construction guarantees precision and durability. The machine is run-in before delivery.

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Fodpez D Ug Ijfx Aivjpn Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y High pressure pumps Toggle filter Tool setter

Condition: used, functionality: fully functional, machine/vehicle number: 33099, mileage: 79,900 km, power: 315 kW (428.28 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 16 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class EX/II including AT, weight variant 28 t, engine OM471, secondary water retarder, regulated water pump, transmission oil cooler, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, transmission lock for auxiliary drive, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: front axle/rear axle 385/65R22.5, drive axle 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, tinted windshield, sunroof, electric windows, comfort central locking system, driver comfort suspension seat, co-driver functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, multimedia radio with touch screen, Bluetooth and navigation, digital tachograph VDO, trip computer, 24 V socket in the co-driver footwell, circuit breaker, pre-wiring for toll collection system, air conditioning, cruise control, refrigerator on engine tunnel, attention assist, turning assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof beacons on cab roof, sun visor Fpedpfxoz Hatxs Aiven horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 16 m³ (sludge chamber approx. 15 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with a maintenance opening, hydraulically upward-opening full-size cover with hydraulic latch (galvanized) and a suction connection at the bottom and top, 1x piston lock, piston with 2 piston seals and seal pressure regulation, sludge chamber level indicator with external scale with graduations every 500 l and internal float, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, discharge apron made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the operating station, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation stepless, small, hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED roof beacon at the rear, reversing camera

Condition: used, functionality: fully functional, machine/vehicle number: 33098, mileage: 59,900 km, power: 315 kW (428.28 HP), first registration: 08/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class EX/II including AT, weight variant 28 t, engine OM471, secondary water retarder, regulated water pump, transmission oil cooler, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, transmission lock for auxiliary drive, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), tires: front axle/rear axle 385/65R22.5, drive axle 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, tinted windshield, sunroof, electric windows, comfort central locking system, driver comfort air-suspended seat, co-driver functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 24 V socket in the co-driver footwell, circuit breaker, pre-wiring for toll collection, air conditioning, cruise control, refrigerator on engine tunnel, attention assist, turning assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Fedpfx Asz Harusivspn Extension cylinder, total volume 15 m³, usable volume consisting of approximately 1 m³ fresh water tank and approximately 12 m³ sludge tank, tank wall thickness 6 mm, tank emptying by pushing using the extension cylinder, free discharge or by pressing with the vacuum pump, bottom flap to be opened hydraulically upwards over the entire cross-section, hydraulic latch, sealing of the closure base in NBR, lower and upper suction connection with Perrot DN 100 and with pneumatically operated sliding gate valve, sludge tank level indicator with float and external scale (graduation every 500 L), sight glass for water tank, discharge apron made of stainless steel, vacuum pump CVS RSW 1600 R (1600 m³/h) hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (approx. 80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulic HD hose reel with approx. 40 m HD hose DN 13 and spray gun (with swivel joint), suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted on the rear right, radio remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/discharge, transport hose reel up/down, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, transport hose reel hydraulically driven, galvanized with approx. 40 m suction hose in DN 80, speed for unwinding/winding up can be adjusted steplessly, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Fjdsz E Rbdepfx Aivepn Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, functionality: fully functional, machine/vehicle number: 34163, mileage: 19,900 km, power: 315 kW (428.28 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling with ring spring (D40), trailer hydraulics, tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with remote control, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery master switch, pre-equipment for toll collection, pre-equipment for alcohol tester with immobilizer, air conditioning, cruise control, speed limiter, residual heat utilization, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 14.5 m³ (sludge chamber approx. 13.5 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with inspection opening, 2-way piston lock: water/sludge approx. 2.4 m³/13.3 m³; 4.4 m³/11.3 m³, piston with 2 piston seals and seal pressure regulation, hydraulically upward-opening full-cover lid with hydraulic latch (galvanized) and one suction connection at the bottom and top, sludge chamber level indicator with external scale with divisions of 500 l and internal float, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, discharge chute made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the control panel, over-suction protection, oil separator, HD pump Pratissoli KF 32H (approx. 120 l/min at 170 bar) hydraulically driven, protection against water shortage, pressure regulation steplessly, small hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 19, 40 m are available, spray gun, suction boom hydraulically pivoting (approx. 270°) with a suction hose DN 100, at the end there is a suction pipe DN 100 with a length of approx. 3500 mm, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash tank 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED rotating beacon light at the rear, reversing camera Fjdoz Hcppjpfx Aivjpn

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-elliptical fenders with anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with raise/lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal for display on the dashboard in the driver's cab; the truck must be appropriately prepared; no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: with certain tractor units, false diagnoses may occur, even if the function is working) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Operating instructions Fodpei Riv Nefx Aivspn Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EC - FGV) prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year guarantee against rust-through Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36016, mileage: 4,990 km, power: 335 kW (455.47 HP), first registration: 07/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, front guard assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multi-function steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor horizontal tank, total volume 15 m³, useful volume approx. 14 m³ sludge chamber, tank wall thickness 6 mm, 4 lateral water tanks (each 450 l) made of plastic with a total of approx. 1800 l water capacity, vacuum pump CVS Vacustar 1300 (approx. 1,300 m³/h) hydraulically driven, transport hose reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding in/out adjustable, HD pump Pratissoli KT30 (80 l/min at max. 175 bar) hydraulically driven, stepless pressure regulation, small hydraulically driven HD hose reel with approx. 50 m HD hose DN 13 and spray gun (with swivel joint), tank emptying by free outflow or by pressing with the vacuum pump, bottom flap over the entire cross-section hydraulically opening upwards, hydraulic locking of the knag, sealing of the closing bottom in NBR, one baffle plate in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated sliding gate valve, level indicator for sludge chamber with float and external scale (division of 500 l), sight glass for water tanks, discharge flap made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted on the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/pressure, transport hose reel in/out, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics. Fjdpfx Ajz Hkpdjivopn

Condition: used, functionality: fully functional, machine/vehicle number: 33530, mileage: 239,900 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 15.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Chassis designed for a 28-ton weight variant, OM471 engine, transmission oil cooler, disc brakes, Active Brake Assist, High Performance Engine Brake, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 tons, 3-leaf springs, air-suspended rear axle, rear axle 13 tons with differential lock, steerable and liftable 9-ton trailing axle, regulated water pump, transmission lock for auxiliary drive, daytime running lights, light sensor, trailer coupling Ringfeder (D40), tires: front and rear axles 385/65R22.5, middle axle 315/80R22.5, fuel tank 290 liters + 60 liters AdBlue, length/width/height/mm: 9,200/2,550/3,650; M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, navigation system, tinted windshield, sunroof, heated and electrically adjustable mirrors, electric windows, comfort central locking system, driver's comfort suspension seat, passenger's comfort suspension seat, multifunction steering wheel, reversing warning system combined with hazard lights, digital tachograph VDO, trip computer, 12/24 V sockets in the passenger footwell, circuit breakers, pre-equipment for toll collection, air conditioning, refrigerator, cruise control, attention assist, traffic sign assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof-mounted rotating beacons, sun visor. Fedpfx Aijz Hbr Novopn Total volume 15.5 m³, usable volume consisting of an 800-liter fresh water tank and a 13 m³ sludge tank, tank wall thickness 6 mm, tank emptying via free discharge or by pressing with the vacuum pump, floor flap over the entire cross-section to be opened upwards hydraulically, mechanical swivel locks, sealing of the closure base in NBR, one baffle in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide valve, sludge tank level indicator with float and external scale (division of 500 L), sight glass for water tank, discharge skirt made of stainless steel, vacuum pump GardnerDenver RFW 200 DVL (1250 m³/h) with 685 operating hours, hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (80 l/min at max 175 bar) with 681 operating hours, hydraulically driven, stepless pressure regulation, small manual HD hose reel with approx. 40 m HD hose DN13 and spray gun (with swivel joint), 5x LED work lights (one at the rear and two on the right and left), LED rotating beacon at the rear of the superstructure, suction hose boxes on the right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/balancing/discharge, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, trailer suction line, trailer hydraulics.

Condition: used, functionality: fully functional, machine/vehicle number: 33124, mileage: 999 km, power: 235 kW (319.51 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, MAN PowerMatic 08.12.OD torque converter automatic transmission, operated with steering column lever, manual (DNR selector), heated fuel filter, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full-brake assist, emergency brake assist EBA Plus, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, MAN EasyStart hill start assist, exhaust pipe positioned high and to the left behind the cab, lane departure warning LDW, turning assist, MAN AttentionGuard driver alertness system, preparation for alcohol interlock, traffic sign recognition, distance warning, trailer hitch Rockinger 400G150B (40 mm) Cab CC (narrow, short, normal height), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, rain sensor, light sensor, LED headlights, LED daytime running lights, tinted windshield and door windows, lift-up roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multi-function steering wheel, safety automatic, cruise control, digital axle load display (ALM), MAN Media System Navigation Advanced 7-inch with navigation and Bluetooth hands-free system, rear view camera, smoker's package, 2x LED rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, sun visor on driver's door, sun shield Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 11.5 m³ (sludge compartment approx. 10.5 m³ / water compartment approx. 1.0 m³), water compartment is welded into the front of the container with inspection opening, water compartment level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow line, 2x water tanks, each approx. 0.5 m³, on the left/right side of the container made of plastic, rear flap hydraulically opens upwards over the entire cross-section with pipe rupture protection, hydraulic latch locking, sludge compartment level indicator with external scale with divisions every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge apron made of stainless steel, 2 pneumatically operated slide valves, container discharge: free discharge through the lower suction connection or by tipping to the rear, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the control panel, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, hooks on the bottom flap for transporting long continuous hoses, waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the Fjdpfjz Ha Ivox Aivjpn

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Heidenhain, controller model: ITNC 530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C60 Control system: Heidenhain iTNC 530 Year of manufacture: 2006 Travel ranges: X-axis: 2000 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 2500x600 mm Table load: approx. 2000 kg Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 20 - 8000 rpm Accessories: Fjdpfx Aszbzqxeivspn - Coolant filtration system, 600 l - Internal cooling - Chip conveyor - Electronic handwheel - Magnetic chuck, 1200x600 mm - Table-mounted control panel TS27R (tool measurement) - Measuring probe RENISHAW RMP 60 - Glass scales in all axes Special features: The magnetic chuck is fully integrated into the Heidenhain control system and can be conveniently operated both via the central machine control panel and via the controls on the machine doors. This enables short setup times and easy, safe operation directly at the machine. Subject to changes and errors in technical data and specifications, as well as prior sale.

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: Fsdpfx Aozd H U Hoivepn -

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36014, mileage: 4,990 km, power: 335 kW (455.47 HP), first registration: 06/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Fpodoz Hkkuopfx Aivjn Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, front guard assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with central locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery main switch, pre-wiring for toll collection system, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Cylindrical container designed as a tipper (tipping angle min. 35°), total volume 15 m³, usable volume approx. 14 m³ sludge compartment, container wall thickness 6 mm, 4 lateral water tanks (each 450 l) made of plastic with a total water capacity of approx. 1800 l, vacuum pump CVS Vacustar 1300, hydraulically driven, transport reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding/unwinding adjustable, HD pump Pratissoli KT30 (80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulically driven HD reel with approx. 50 m HD hose DN 13 and spray gun (with rotary joint), container discharge via free outlet or by pressing with the vacuum pump, bottom flap to be opened upwards hydraulically over the entire cross-section, hydraulic locking of the retaining lugs, sealing of the closing bottom in NBR, one bulkhead in the container, lower and upper suction port with Perrot DN 100 and with pneumatically operated slide valve, sludge compartment level indicator with float and external scale (division per 500 L), sight glass for water tanks, discharge flap made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/discharge, transport reel up/down, lower suction port on/off, upper suction port on/off, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics.

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Fpjdez Hnzkspfx Aivsn Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: used, Year of construction: 2023, Max. cutting width: 4600 mm Max. cutting height, horizontal: 1958 mm Max. cutting height, vertical: 2070 mm Max. processing thickness: 60 mm Saw blade diameter: 250 mm Motor power: 4 kW Saw blade arbor: 30 mm Bottom support: fixed rollers Material support: aluminum lath grid with plastic pads Small parts support: yes Measuring system: scale Fpsdpfx Aisz Hp Edevsn Saw head swivel: manual Mounting: free-standing Extraction: external extraction required Weight approx.: 910 kg Extraction diameter: 2x100 mm Storage location:

Year of construction: 2014, condition: excellent (used), Holzmann TBS 1320 sheet metal shears Holzmann TBS 1320 sheet metal shears Features: - Limiter for precise material setting up to 700mm with a scale, -possibility to set the front stop up to 880mm, - rectangular stop for setting the material on both sides of the working table, -automatic clamp for holding the sheet metal, - easy and friendly work - foot operation. Max. cutting length 1320 mm Max. sheet thickness 1 mm Working height 800 mm Fpjdpfx Aiogzzwnoven Weight 545 kg

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Fjdpfx Aioy Eu Tvjvepn Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Fsdpfx Ajb Rnv Seivepn Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, mileage: 364,902 km, power: 265 kW (360.30 HP), first registration: 12/2013, fuel type: diesel, empty load weight: 17,740 kg, maximum load weight: 8,260 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,100 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, loading space volume: 31 m³, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, traction control, * German vehicle * 1st owner * Condition, see photos * Heil Farid EHP21313 body, load volume 31 m3 * Can handle containers up to 3,630 kg. * Schmidt front loader * CWOP C100 with scale and receipt printer * Hydraulically adjustable forks * 250 bar working pressure * Air conditioning * Liftable trailing steering axle * Leaf/air suspension + raise/lower * Automatic transmission * Hill start assist * Parking aid camera * Blind spot assistant * ABS/ASR/ESP * Electric windows * Differential lock * 2 air-suspended comfort seats * Sunroof * Toolbox * Work lights * Electrically heated mirrors * Beacon lights * Sun visor * Central lubrication system * Electric engine brake * Wheelbase 4.10 m + 1.40 m * Gross weight 26,000 kg * Empty weight 17,740 kg * Payload 8,260 kg If a new TÜV approval is desired, we will be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Fjdpfx Ajwrraajivspn Notice: We strongly offer and recommend an inspection and examination of the goods, so that the buyer does not develop any false expectations regarding condition and suitability. Inspection and examinations are possible and expressly desired at any time by appointment. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is responsible for personally verifying the condition and equipment of the goods/vehicles. Changes, intermediate sale and errors reserved.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners OPTION (PRICE ON REQUEST): Diagonal holes Fsdpowiricofx Aivjpn

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Fjdpfx Aezhm Dpsivopn Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fpjdpfxezqyxxs Aivon Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg