Used Sawmill for sale (778)

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, operating hours: 33,590 h, load capacity: 16,000 kg, fuel type: diesel, mast type: duplex, gearing type: mechanical, Equipment: adjustable boom, cabin, gripper hydraulics, MGC.pl in Łaziska Górne offers for sale a Svetruck SVE-TMF 12/9 HB heavy-duty transloading machine from 1990, equipped with a wood grapple and a 393 hp, six-cylinder Volvo diesel engine. This machine, with a weight of 50,000 kg, is designed for handling logs and operating in wood storage yards. Since its inception, it has had only one owner and was used in a port for loading and unloading wood transported by ships. The Svetruck is prepared for transport. The grapple has been temporarily removed. The original arm and other attachments are included. The first two photos show the machine with the attachments installed, in its working configuration. The machine can also be used for other tasks, such as assisting in the loading of concrete blocks, or other jobs requiring a powerful and reliable machine! KEY FEATURES Gbjdev Rbn Eopfx Aivsu Heavy-duty transloading machine for wood handling. One owner since new. Originally used in a port handling logs. Volvo engine: 393 hp / 289 kW. Weight: 50 tons. Lifting height: up to 7.5 m. Lifting capacity according to the provided specifications: 12 tons. Lifting capacity at the highest lifting point: up to 9 tons. Original wood grapple included. Grapple re-installation available at no additional cost. Cabin with air conditioning and Webasto heating. Machine prepared for transport. APPLICATION The Svetruck is suitable for: Port terminals handling wood. Wood storage yards and transloading areas. Sawmills and wood processing plants. Loading, unloading, and moving logs. The grapple allows for handling wood in a configuration suitable for this type of work. TECHNICAL DATA Manufacturer: Svetruck. Model: SVE-TMF 12/9 HB. Year of manufacture: 1990. Weight: 50,000 kg. Lifting height: 7500 mm. Lifting capacity according to specifications: 12,000 kg. Lifting capacity at the highest lifting point: up to 9000 kg. Machine dimensions (length x width x height): 6800 x 3530 x 3900 mm. The permissible lifting capacity depends on the arm position, lifting height, center of gravity of the load, and the attachments used. The parameters for a specific configuration should be confirmed on the nameplate and in the machine's lifting capacity table. The transport dimensions after dismantling the attachments require separate confirmation before arranging transport. VOLVO ENGINE Engine manufacturer: Volvo. Fuel: diesel. Cylinder arrangement: in-line. Number of cylinders: 6. Engine displacement: 12,130 cm³. Power: 393 hp / 289 kW. CABIN EQUIPMENT Air conditioning. Webasto heating. Radio. CB radio. Two seats. ATTACHMENTS AND TRANSPORT PREPARATION The machine is offered with the original arm, wood grapple, and other attachments included in the set. The grapple is currently removed to prepare the machine for transport. Upon request, we can re-install it at no additional cost, within the stated selling price. Due to its weight and size, transport requires appropriately selected specialized transport. The scope of preparation and the method of collection will be agreed upon individually with the buyer. The stated price is net and applies to export and to companies. A significant discount is possible for individual customers - Please contact us directly by phone to get your best price.

Condition: ready for operation (used), 03. Pini and Kay VU 65 HH e band saw with splitter wedge with 45 kW drive motor with gearbox with saw blades with saw blade tensioner with clamping device with templates with blower Gbsdpfxeh Ict Eo Aiveu Location: Austria, near Steyr

Year of construction: 1993, condition: good (used), Tensioning car, Braun WES fully hydraulic with auxiliary car with rails track gauge: 79 cm Godpfxjfuh Dyo Aivjbu in good condition – immediately available Please also view my other listings. I look forward to your inquiry.

Year of construction: 2017, condition: used, processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW Godponwm R Nofx Aivebu

Condition: good (used), Prism lifter, Schmidt OF model, with 5 lifting devices. Length: 8.3m Width: 70cm Godefwtayjpfx Aivebu Height: 40-70cm Please also check my other listings. I look forward to your inquiry.

Year of construction: 2012, condition: like new (used), EWD roller conveyor with lateral extraction Length: 6500 mm Gbjdpfx Aijglugyeveu Overall width: 2000 mm Roller covering length: 1200 mm

Year of construction: 1982, condition: used, In Good Condition Gbsdpfx Aijdq Ug Ievou

Condition: excellent (used), functionality: fully functional, Robust Möhringer slat conveyor system. Length 11.20 m. Slat length 2.0 m. Overall height 1.0 m. Equipped with integrated lifting and lowering transverse conveyors with 5 chain strands, hydraulically operated. Discharge to the left and right. 4 hydraulically lifting and lowering model support rollers. Split drive with 2 geared motors. Gbodpfxozg Drno Aivju

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Gbedpfozh Ti Eex Aiveu Vecoplan KKF 500-1K-U Scraper Conveyor The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: good (used), Year of construction: 1997, Storti Multibi 18 180mm cutting height Gbjdpfx Aisziavbovsu Double shaft 2 x 45kW

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg Gsdpfx Ajuz Hmxoivobu *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: ready for operation (used), Packing and stacking machine for sawn wood. Gbedpfx Aisk T Aqwevou

Condition: used, machine/vehicle number: G-BBS112186P, Hydraulic log band saw Forestor CTR800H including the following accessories: 3m extension section, chain log turner, hydraulically rotatable log lifter, hydraulic log lifter with drive, saw band tensioning device, 11 kW motor, Gbjdpfovw Eb Asx Aiveu pre-cutting device, ammeter, saw band guide electrically adjustable, LG Automat, irrigation pump with automatic switch-on Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Woodmizer EG300 Twin Blade Edger, year 2019, in good condition Technical data: Pass-through width: 550 mm Cutting height: 60 mm Minimum cutting width: 60 mm Maximum cutting width: 410 mm Width adjustment: Electric Minimum board length: 700 mm Saw blade diameter: 2 x 350 mm Motor: 15 kW Feed speed: Infinitely variable 0 to 25 m/min Machine length with tables: 4900 mm Machine width: 1630 mm Machine height: 1250 mm Gbodpfjx H Uhisx Aivju Working height: 900 mm Weight: 988 kg Price subject to change. Errors and misprints excepted.

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: 1. Frame saw Bogli 71 with infeed and auxiliary car, and distribution device behind the sawmill. Sawmill type: Bogli Marathon 71 Frame: 710 mm, hydraulic sawmill Hydraulic lifting and lowering of the saw blade 55 kW motor Car with auxiliary car, track gauge 90 cm Distribution device behind the sawmill All as shown in pictures no. 1, 2, 3, 4 Price is negotiable. 2. Saw gate Linck E 28-28 Frame stroke 600 mm All as shown in pictures no. 5, 6, 7, 8 Price is negotiable. 3. Saw gate Linck with a loading car and a distribution device behind the sawmill. Saw frame Linck 71 – Frame width 710 mm – Feed rate 12 m/min Gjdpfen I Udxox Aivobu – Fully hydraulic: hydraulic shifting of the saws, lowering and lifting of the saw blade Linck hydraulic loading car with additional equipment. Distribution device behind the sawmill (sack, wedge) All as shown in pictures no. 9, 10, 11, 12, 13 Price is negotiable.

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: Gjdpfxezzx Iye Aivjbu - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, High-performance root reducer for installation in a cross-flow conveyor system Log lengths from 2.80 m to 22 meters Standard milling shaft length 1020 mm with top pressure device (powered chain prism) Robust design, also available as a twin-shaft or long-timber version Optional: 1200 mm or 1500 mm milling shaft 90 kW drive Central lubrication Gbsdpfxozv Rhho Aivju

Condition: used, Volvo Wheel Loader L120G Gedpfxoy Dt Aas Aivjbu Year: 2013 Hours: 36595

Condition: used, Volvo wheel loader L180F Model: L180F Gbodpfx Aijy D Hgfsvsu Year: 2008

Condition: used, Hazemag Universa 2030 rotor shredder with fixed shredding knives, designed for coarse shredding of wood and other materials. The machine is equipped with a hydraulically adjustable grate system for controlling the output material size. Technical specifications: Manufacturer: Hazemag Model: Universa 2030 Rotor length: 3000 mm Rotor diameter: 2000 mm Rotor weight: approx. 25 t Gjdpfx Aiszpxfusvobu Rotor speed: 480 rpm Drive motor: 500 kW Electric motor and starter included Hydraulically adjustable grate system Output size adjustable from 100 to 400 mm (10–40 cm) Total machine weight: approx. 100 t Approximately 1,000 operating hours

Condition: used, Belt conveyor Length: 110 m Motor: ASEA 62 kW Belt width: 1000 mm Capacity: 500–1000 m³/h Supplied with partial conveyor roofing Gedezpxm Ejpfx Aivjbu

Condition: used, SCM Record 120 CNC Manufacturer: SCM (Italy) Model: Record 120 Year: 1997 Power supply: 400 V / 50 Hz / 3 Phase Gbjdszrw Imjpfx Aivsu Weight: 4200 kg

Condition: used, functionality: fully functional, machine/vehicle number: GA56619, Blue Diamond Twin Box Wood Shavings Machine Gjdpfx Aezwn Ibeivobu Manufacturer: Dragon Machinery Ltd, United Kingdom (Blue Diamond brand) Model: D2-101-240 (Enclosed drive) – Twin Box Serial number: GA56619 Weight: ~15 tonnes Number of rotors: 4 Rotor diameter: 254 mm (10″) Rotor power: 45 kW (each) Rotor speed: up to 2,816 rpm (max) Feed motor: ~22.5 kW Feed speed: 1.0–2.5 ft/s (adjustable) Log box size: 2.65 m x 0.97 m Log diameter range: 75–900 mm (up to 914 mm) Log length: up to 2.5 m Total power requirement: ~180 kW (recommended 400A, D-rated, 3-phase + neutral) Overall dimensions: 11,420 x 2,895 x 2,068 mm (L x W x H)

Condition: used, Board stacking system Roller conveyor Gbjdpfjz Anp Nex Aivsu Cross chain conveyor Board hill Packer Pack elevator Designed for boards up to 6 m long

Condition: used, Chain conveyor Length: 40 m Width: 90 cm Gedpfxsz Anrqo Aivjbu Depth: 20 cm