Used Rubber Extruders for sale (4,069)

Condition: new, Cylinder, packed in wooden box, cylinder with ceramic heaters for 90mm extruder Guodpoua Ti Isfx Acmei grooved feed

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Guedpfx Aszz Thbscmsi Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: used, mileage: 581,947 km, power: 368 kW (500.34 HP), first registration: 11/2018, fuel type: diesel, overall weight: 26 kg, axle configuration: 6x2, wheelbase: 5 mm, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, traction control, trailer coupling, Color: Red, permissible total weight: 26 kg, air suspension, lift axle, intarder, tachograph, trailer coupling: ROCKINGER 400G150A, BDF swap body frame: 260 mm high for 7820/7450 mm bodies, electronic braking system EBS, brake assistant, electronic stability program ESP, traction control system ASR, comfort seats, driver's seat with air suspension, armrests for driver/passenger, seat heating, radio, audio interface, car phone, lane keeping assist, leather steering wheel, adjustable steering column, lumbar support, electric windows, roof spoiler, fog lights, electric exterior mirrors, curb mirrors: right side, left side, wide-angle mirrors, immobilizer, central locking, tinted windows, underride protection, CB radio, sun visor, decorative inserts, turning lights, rubber floor covering, hypoid axle ratio HY i 2.71, fuel filter heater, cross member for trailer coupling, wiring for tanker truck according to ADR. This is a non-binding offer. Subject to prior sale, errors and changes. Gjdpfx Acsy Hnvmemeui

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing Gsdpfe Ah Hgzox Acmeui A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. This equipment is being sold Ex-Works, with the buyer responsible for packing & shipping. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Edge banding machine with combined unit and electronic segmented pressure beam, edge segments can be switched on and off. Segment width of the pressure beam 35 mm. Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed frequency-controlled from 2 - 18 m/s. Belt feed infinitely variable via frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Gsdpfxezqvmro Acmeui Constant working height of 900 mm by adjusting the upper part of the machine, thus also integrable in sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimension 1360 x 1900 mm. 3 rubberized pressure rollers. Infeed roller table and foldable outlet table. Preparation for vacuum blower. The belt is perforated and a connector for an optional blower is available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200 mm, 1 x 140 mm and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure beam application points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connection cable. Original paint, only touched up in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: not inspected (used), Ventzki spring-tine harrow/cultivator with crumbling roller – agricultural implement For sale is an older agricultural implement from the Ventzki brand, a plough and agricultural machinery factory in Esslingen/Stuttgart. It is a spring-tine harrow or a cultivator/fine tiller with a following or crumbling roller. The implement is suitable for loosening the soil, leveling it, and preparing the seedbed. Features: Manufacturer: Ventzki Spring tines / cultivator tines Several rows of tines Following or crumbling roller Three-point hitch for tractor Sturdy, robust construction Guedps Ai Npnjfx Acmoi Older original agricultural implement Approx. 1.80m wide, 2.50m long The implement is in used condition, with age-related rust and signs of wear. It has not been used for some time. The exact function has not been tested recently. Inspection on site is possible by arrangement.

Condition: used, - Manufacturer: Hackemack - Working width: 1300 mm - Roller diameter: 65 mm - Roller pitch: 100 mm - All rollers with rubber surface Guodpexz Hb Uofx Acmji - Infinitely variable feed via handwheel - Feed speed approx. 2 - 8 m/min - Length: 1,900 mm + folding table 600 mm, 2,500 mm - Voltage, Hz: 400 V / 50 Hz - Location: In stock, D-32825 Blomberg

Condition: used, Year of construction: 2005, Roller transport Finnrose 3.000 mm - Producer Aagaard Finnrose - Year of construction 2005 - Working width 1.300 mm - Overall width 1.380 mm - roller conveyor height 800 mm - Diameter roller 65 mm - Roller pitch 110 mm - all rollers with rubber surface - FU-Regelung für Feed speed - Angetrieben - Length 3.000 mm - Colour 7035 Gujdezf N Npepfx Acmji - Motor power 0,37 kW - Voltage / HZ 400 / 50 - Location, in stock

Condition: used, English Type: German RepRap X1000 RepRap 3D printer The X1000 is a 3D printer for processing a wide variety of plastic materials, with an extra-large printing area and an optional dual extruder. With a layer thickness of up to 0.1 mm and a printing area of 1000x800x600 mm, this 3D printer can be used to produce both large models and multiple small objects with precision. An enclosed control cabinet, an emergency stop switch and an optional CO2-based dual fire protection system meet the requirements for safe operation in an industrial environment. Technical data: Description Data Printing area (X - Y - Z) 1000 x 800 x 600 mm Printing speed 10 - 150 mm/s Travel speed 10 - 300 mm/s Layer thickness (minimum) 0.1 mm (nozzle dependent) Filament/nozzle diameter (standard) 1.75 mm / 0.8 mm Material PLA, Performance PLA, Laywood, PVA, PET-G, TPU64D Extruder type DD3 Dual Extruder temperature (maximum) 290°C Data transfer LC touch display, wireless printing via WLAN, Ethernet Software Simplify3D software Power consumption 2500 W Operating voltage* Three-phase 400V (CEE 3L+N+PE) Gusdpfxjzd Td Uj Acmji Ambient temperature 15-26° C External dimensions approx. (W x D x H) 1725 x 1500 x 1320 mm Weight approx. 400 kg Marking DIN 10218-2 Options Heated bed, dual extruder, dual CO2 fire protection system Available nozzles 0.4 / 0.6 mm Available nozzle material Brass, hardened steel Technology Fused Filament Fabrication (FFF) Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. Gujdpfx Acszd Tlljmsi With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, 3D systems Type: DT60 Printing volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in the Z-axis: 1.25 microns Precision in the X and Y axes: 7.5 microns Max. extruder temperature: 500 °C Max. build chamber temperature: 120 °C Nozzle diameter: 0.6 mm Other available Nozzle diameters: 0.2 / 0.4 / 0.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7" LCD touchscreen Remote monitoring Industry 4.0 compatible: WiFi, Ethernet, HotSpot, USB MMS system - Modular Maintenance System Dual filament loading Automatic filament change Heated feeder Jam detection Sensor for detecting the end of the filament Print recovery system Liquid cooling Double-hardened glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) (Sale ex warehouse!) Gujdpfx Acezd Tugomei (Subject to changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Gjdjzimgtepfx Acmeui Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Gedpfx Acez Ek R Ejmeui Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: used, operating hours: 4,446 h, fuel type: electric, color: red, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKO B 750 R Drive: ELECTRIC Condition: see photos / good condition Used condition (please call for any defects) Battery is fully charged Wheels replaced - good tread Item No.: B 750 R Manufacturer: HAKO Year of manufacture: see photo - looks great Hour counter reads "4446" 2 brushes Electric-powered (Charger not included) New price: approx. €22,900 Price quoted upon pickup from warehouse 47441 Moers Various cleaning and scrubber-dryers in stock We offer as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. Further information about the item cannot be provided. We offer the opportunity to view the item on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment by phone. Gusdowffw Sopfx Acmsi The item can be picked up immediately if required. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: used, Year of construction: 2025, operating hours: 20 h, functionality: fully functional, Powerful scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 20 hours Year of manufacture: 2025 SCHORR scrubber dryer 24V floor mop and scrubber 100Ah scrubber Efficient floor cleaning combined with extremely easy handling. The scrubber dryer with a 100Ah battery and a 51cm brush diameter offers an impressive cleaning performance of up to 2500 m²/h, ideal for the efficient cleaning of medium to large areas. With its robust construction and long battery life, it guarantees reliable cleaning even under demanding conditions. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged with the included charger using a standard 230V household outlet. SCHORR RR850FS scrubber dryer – Discover the advantages: -- Up to 2500m²/h cleaning performance -- 60-liter waste water tank -- 510mm brush diameter -- 24V 100Ah batteries -- Includes charger -- Fully electric -- Ideal for warehouses and department stores -- Extremely robust and reliable Technical specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR850FS Drive: Idler Suction motor power: 500W Brush motor power: 500W Operating time: approx. 4 hours Number of wheels: 2 Tires: PU (non-slip) Weight: 250kg Basic dimensions Fresh water tank volume: 55l Recovery water tank volume: 60l Disc brush diameter: 510mm Overall length: 1400mm Overall width: 850mm Overall height: 1050mm Gsdpfx Ajwh Rhzecmeui *Further technical specifications are available upon request. The scrubber-dryer is user-friendly and offers an intuitive interface that is easy to understand even for inexperienced users. With its ergonomic design and flexible steering, it allows effortless navigation through tight spaces, ensuring efficient cleaning with minimal effort. The scrubber-dryer has a 55-liter fresh water tank and a 60-liter waste water tank. The great advantage of this ratio is that it cannot accidentally take in more water than it releases. This prevents overflow, even if foaming should occur in the tank. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the machine? No problem! We offer attractive options for this as well. Simply contact us, and we will advise you on the various options. We look forward to hearing from you! We at SCHORR are happy to answer any questions you may have about our scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your consultation.

Condition: new, Year of construction: 2024, SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBING MACHINE Guedouacy Aopfx Acmei Efficient floor cleaning combined with extremely easy handling. Bring back the shine to your hall! The all-electric ride-on scrubber-dryer from SCHORR makes cleaning large hall areas much easier, especially thanks to the machine's excellent maneuverability. The steering angle is 90°, so columns or narrow spaces, for example, are no problem. No special training is required to use the machine. Simply fill it up, mount it and drive off. With the 100Ah batteries installed, intensive continuous use of approx. 4 hours is possible. The batteries are conveniently charged with the supplied charger at a standard 230V socket. SCHORR SCRUBBER DRYER RR1030FS - DISCOVER THE ADVANTAGES: -- Fully electric scrubber dryer with 1030mm working width - ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80 liter fresh water tank and 85 liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR1030FS Drive: Seat Power suction motor: 500W Power: Brush motor: 500W Power: Drive motor: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Own weight: 250kg Basic dimensions Fresh water tank volume: 80l Dirty water tank volume: 85l Brush diameter: 510mm Total length: 1400mm Total width: 1030mm Overall height: 1100mm *Further technical data available on request. The ride-on scrubber dryer is designed to be user-friendly to make the cleaning process as straightforward as possible. The intuitive control panel makes it easy to control all functions, so even inexperienced users can quickly get to grips with it. Thanks to the ergonomic seat and clear view of the cleaning surface, you can work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure that long cleaning intervals are possible without the need for frequent refilling or emptying. The machine is easy to maneuver and is ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on scrubber-driers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 24 V, operation weight: 160 kg, LARGE QUANTITY AVAILABLE! Power: Battery: 24V / 100Ah Avarage power consumption: 1000W Power suction turbine: 500W Power brush drive: 500 W Max running time: 5 hours Cleaning brushes: Brush speed: 175 rpm Brush diameter: 510mm Vacuuming: Vacuum power, air volume (max): 24 L/s Vacuuming power, negative pressure (max): 120 kPA (mbar) Dimensions and weights: Theoretical surface cleaning Performance: 2000 m²/h Gjdpev Rvy Ajfx Acmsui Suction width: 850 mm Cleaning width: 510 mm Max. working range incline: 2% Fresh/waste water tank volume: 50/50 L Max. water temperature 60°C Ambient temperature 5-40°C Net weight 160 kg Dimensions of battery compartment: 350 x 350 mm Values determined as per EN60335-2-72: Total oscillation value: < 2.5 m/s² Uncertainty K: 0.2 m/s² Sound pressure level Lpa: 66 dB(A) Uncertainty Kpa: 2 dB(A) Sound power level Lwa +: 81 dB(A)

Condition: good (used), Year of construction: 2018, Voltage in Volt: 400 Frequency in Hz: 50 IP protection class: 55 Protection class: I Power consumption in kilowatts: 4 Air volume without hose in m³/h - l/min: 489 - 8150 Maximum negative pressure in kPa-mbar: 30 - 300 Noise level in dB(A): 72 Tank volume in liters: 100 Main filter type: Polyester Star Filter Main filter area in cm²: 19500 HEPA H14 in cm²: - Inlet in mm: 70 Dimensions L x W x H in mm: 1130x600x1530 Weight in kg: 139 Gedpfx Acjr E Uwuemsui Optional Longopac system: - 5-pole three-phase plug: Included Plug with phase inverter: Included Filter shaker (manual): Included Accessory container: Included Removable container: Included Chassis with brakes: Included Motor protection switch: Included Pressure gauge: Included Three-phase side channel blower: Included Hose and cable holder: Included Cyclone plate: Included Vacuum relief valve: Included

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder Guedpfx Asw Snlwecmsi • Water Cooled 130kW AC Motor and Drive. – Low Noise

Condition: new, Year of construction: 2022, functionality: fully functional, working width: 750 mm, area performance: 5,100 m²/h, overall weight: 650 kg, warranty duration: 24 months, tank capacity: 110 l, total height: 1,315 mm, total width: 975 mm, total length: 1,695 mm, water tank capacity: 110 l, battery voltage: 24 V, gradeability: 10 %, noise level: 59 dB, rotational speed (min.): 180 rpm, Technical Specification Drive type: Battery powered Traction drive: Traction motor Brush working width: 750 mm Working/suction width: 950 mm Clean/dirty water tank capacity: 110 / 110 l Theoretical maximum area performance: 5,100 m²/h Practical area performance: 3,600 m²/h Battery voltage: 24 V Maximum battery operating time: 4 h Charger supply voltage: 100 – 230 V / 50 – 60 Hz Climbing ability: 10 % Brush rotation speed: 180 rpm Brush pressure: 40 g/cm² Maximum water consumption: 5.7 l/min Sound pressure level: 59 dB(A) Rated power: up to 2,350 W Permissible total weight: 650 kg Dimensions (L x W x H): 1,695 x 975 x 1,315 mm Side scrubbing module for time and cost savings: - Enables cleaning of areas near walls or shelves close to edges. - Retracts under the unit upon contact with obstacles, preventing damage. - Eliminates manual edge cleaning, reducing associated costs. Height-adjustable seat: - Provides a comfortable working position regardless of the operator's height. - Ensures a particularly comfortable posture during operation. - Allows extended and uninterrupted working intervals. Speed-dependent water dosing: - Reduced water consumption when negotiating curves or during slow movement. - Water-saving function increases the effective area coverage. - Shorter floor drying times and lower risk of residual water left in corners or turns. Suction bar made of die-cast aluminium: Gsdpfsw Id H Nex Acmeui - Equipped with tear-resistant and durable Linatex® squeegee blades for excellent vacuuming results. - Quick and easy replacement of squeegee blades. - Retracts upon wall contact to prevent damage.

Condition: used, Year of construction: 1990, PN-370 Pomini-Farrel Rubber Mixer Tangible Available complete with gearbox, 2 x DC motors, oil scale, fur scale, chemical scale, and batch feeder Description attached! Gjdpfjwmnfhsx Acmjui

Condition: new, machine/vehicle number: Katalognummer: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L) × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 750mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Features: 2-tank system. Gsdpfxexnptgs Acmsui The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. Simple operation thanks to a small number of yellow-coded controls. Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. Designed for daily use. Robust, durable, and reliable device.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 48 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in almost as-new condition. Godpfx Aexw Rkrecmjui This machine was originally used as a demonstration unit at trade fairs and events, and therefore has only 48 operating hours. It is in excellent condition and fully functional. Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2018 - Operating hours: 48 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh water/waste water tank: 300 litres - Surface performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was purchased at an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical details and descriptions are based on manufacturer information. All information is given to the best of our knowledge and belief, however, we do not guarantee completeness, accuracy, or specific characteristics. The device is sold as described and inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and omissions.

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC Gjdpfx Acsxw Tumemjui max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Condition: used, Year of construction: 2015, Ride-on scrubber dryer, scrubber dryer, floor cleaning machine, mop machine, floor cleaner Godpfx Aer Htncjcmeui -Manufacturer: Hako, scrubber dryer with traction drive -Type: Scrubmaster B30 -Voltage: 24 V / 1.1 kW -Battery: 2x Hoppecke 12 V 80 Ah, see photo -Dimensions: 1250/780/H1100 mm -Weight: 151 kg