Used Rubber Cable for sale (7,314)

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Fedow Tk E Aopfx Aikopp Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: new, Year of construction: 2022, functionality: fully functional, working width: 750 mm, area performance: 5,100 m²/h, overall weight: 650 kg, warranty duration: 24 months, tank capacity: 110 l, total height: 1,315 mm, total width: 975 mm, total length: 1,695 mm, water tank capacity: 110 l, battery voltage: 24 V, gradeability: 10 %, noise level: 59 dB, rotational speed (min.): 180 rpm, Technical Specification Drive type: Battery powered Traction drive: Traction motor Brush working width: 750 mm Working/suction width: 950 mm Clean/dirty water tank capacity: 110 / 110 l Theoretical maximum area performance: 5,100 m²/h Practical area performance: 3,600 m²/h Battery voltage: 24 V Maximum battery operating time: 4 h Charger supply voltage: 100 – 230 V / 50 – 60 Hz Climbing ability: 10 % Brush rotation speed: 180 rpm Brush pressure: 40 g/cm² Maximum water consumption: 5.7 l/min Sound pressure level: 59 dB(A) Rated power: up to 2,350 W Permissible total weight: 650 kg Dimensions (L x W x H): 1,695 x 975 x 1,315 mm Side scrubbing module for time and cost savings: - Enables cleaning of areas near walls or shelves close to edges. Fsdow Id H Nepfx Aikepp - Retracts under the unit upon contact with obstacles, preventing damage. - Eliminates manual edge cleaning, reducing associated costs. Height-adjustable seat: - Provides a comfortable working position regardless of the operator's height. - Ensures a particularly comfortable posture during operation. - Allows extended and uninterrupted working intervals. Speed-dependent water dosing: - Reduced water consumption when negotiating curves or during slow movement. - Water-saving function increases the effective area coverage. - Shorter floor drying times and lower risk of residual water left in corners or turns. Suction bar made of die-cast aluminium: - Equipped with tear-resistant and durable Linatex® squeegee blades for excellent vacuuming results. - Quick and easy replacement of squeegee blades. - Retracts upon wall contact to prevent damage.

Condition: used, Year of construction: 1990, PN-370 Pomini-Farrel Rubber Mixer Tangible Fsdpfx Ajwmnfheikjpp Available complete with gearbox, 2 x DC motors, oil scale, fur scale, chemical scale, and batch feeder Description attached!

Condition: new, machine/vehicle number: Katalognummer: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, Technical specifications: Fpodpoxnptgsfx Aikjp Condition - NEW! Catalog Number: 1.515-400.0 Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L) × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 750mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Features: 2-tank system. The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. Simple operation thanks to a small number of yellow-coded controls. Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. Designed for daily use. Robust, durable, and reliable device.

Condition: new, functionality: fully functional, machine/vehicle number: 9.702-476.0, operating pressure: 180 bar, high-pressure hose length: 20,000 mm, overall weight: 198 kg, warranty duration: 24 months, temperature: 80 °C, The HDS 11/18-4 SXA Farmer hot water pressure washer impresses with its high cost-effectiveness thanks to its economical eco!efficiency mode and optimized burner technology. This reliable machine features high-quality components, such as a water-cooled, slow-running, 4-pole electric motor and a robust 3-piston axial pump with ceramic pistons. Thanks to the energy-saving EASY!Force Advanced HD trigger gun, Servo Control, and the clever mobility concept, the machine is extremely user-friendly and ideal for use on farms. The automatic hose reel attachment kit with a 20 m high-pressure hose significantly reduces setup time and increases the working radius. Technical Specifications: Condition: NEW Fodpfx Aoxpgrioikepp Catalog Number: 9.702-476.0 Model: HDS 11/18-4 SXA FARMER Manufacturer: KARCHER Country of Production: Germany Series: Professional Condition: NEW Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 500-1100 Operating Pressure (bar): 30 - 180 Fuel Consumption (kg/h): 5.2 Connected Power (kW): 7.0 Power Cable (m): 5 Max. Temperature (°C): 80 Fuel Tank Capacity (l): 25 Detergent Tank Capacity (l): 20 + 10 Weight (kg): 198 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 Scope of delivery: Automatic hose reel with 20 m DN8, 400 bar hose Hand spray gun: EASY!Force Advanced Spray lance: 1050 mm Power nozzle 25° Servo Control Equipment: 4-pole, water-cooled three-phase motor Pressure cut-off Dry-run protection Automatic hose reel: - The integrated original automatic reel allows for quick and easy hose rewinding. High efficiency: - Eco!efficiency mode – economical and environmentally friendly, even during longer use. - Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: - Precise detergent dosing with rinse function. - Large tank opening with filler chute. Mobility concept: - Jogger principle with large, rubber-tired wheels and a swivel caster. - Integrated tipping trough for effortless transport over steps. - Push handles for easy transport and maneuverability. Simple controls: - Intuitive operation with a large, one-button selector switch.

Condition: new, functionality: fully functional, operating pressure: 170 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, warranty duration: 24 months, temperature: 155 °C, The HDS 9/17-4CXA FARMER is one of the most powerful hot water pressure washers in the mid-range and also impresses with its sophisticated ergonomics and high user-friendliness. Its 4-pole electric motor, robust 3-piston axial pump with ceramic pistons, and economical eco!efficiency mode ensure maximum performance and reliable, economical operation. Many other features and performance details are also impressive, such as the optimized burner technology, detergent tank, convenient mobility concept, comprehensive safety technology, simple operation with a single switch, and clever accessory storage options. Fpjdpfew Rz R Dsx Aikop Technical Specifications: Condition: NEW Model: HDS 9/17-4 CXA FARMER Manufacturer: KARCHER Country of Production: Germany Series: Professional Condition: NEW Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 290-900 Operating Pressure (bar): 30 - 170 Maximum Pressure (bar): 210 Fuel Consumption (kg/h): 5.6 Connected Power (kW): 6.5 Power Cable (m): 5 Weight with Packaging (kg): 129.8 Dimensions (L x W x H) (mm): 1060 x 650 x 920 Included: Automatic hose reel with 20m DN8, 400bar, 155°C hose Hand Spray Gun: EASY!Force Advanced with Servo Control Spray lance: 1050 mm Power nozzle Equipment: Detergent tank: 15L ANTI!Twist Externally fillable tanks for detergent, limescale protection, and fuel Control panel with illuminated indicator Pressure cut-off Automatic hose reel: The integrated original automatic reel allows for quick and easy rewinding of the hose. High efficiency: Eco!efficiency mode – economical and environmentally friendly, even during longer use. Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: Precise detergent dosing with rinse function. Large tank opening with filling chute. Mobility concept: Jogger principle with large, rubber-tired wheels and a swivel caster. Integrated tipping trough for effortless transport over steps. Push handles for easy transport and maneuverability. Simple controls: Intuitive operation thanks to a large, single-button selector switch.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 48 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in almost as-new condition. This machine was originally used as a demonstration unit at trade fairs and events, and therefore has only 48 operating hours. It is in excellent condition and fully functional. Technical Specifications and Features Fedpjxw Rkrsfx Aikjpp - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2018 - Operating hours: 48 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh water/waste water tank: 300 litres - Surface performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was purchased at an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical details and descriptions are based on manufacturer information. All information is given to the best of our knowledge and belief, however, we do not guarantee completeness, accuracy, or specific characteristics. The device is sold as described and inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and omissions.

Year of construction: 2026, condition: new, Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! The ORIGINAL made in AUSTRIA! VACUFORMER - vacuum presses - versatile, functional and economical! VACUFORMER Standard - The must have machine! Clamshell opening: work piece height approx. 500 mm Pressing surface LxW: 2920x1320mm Overall dimensions LxWxH: 3100x1400x1100mm Standard vacuum pump 40m³/h Equipment: Vacuum table with rubber membrane and membrane fast-change system • Fully welded, sturdy and robust steel construction • pressure up to 9 t/m² (-900 mbar rel.) • analogue vacuum pressure gauge • mechanical vacuum pressure regulator • special, very tough Natural rubber membrane up to 130 °C, 690 % elongation, for wood and veneer pressing • robust, heat resistant phenolic resin ply working surface with Fjdpfx Aisf H S T Uokopp integrated air suction channels, thickness 16mm • extra vacuum connector (e.g. for external vacuum bag, vacuum clamping) • incl. swivel castors • with intecrated forklift pockets • complete with cable and plug Electrical connection3~ 400 V, 50/60 Hz, 1.25 kW Other dimensions on request! VACUFORMER L Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x1540mm Overall dimensions LxWxH: 4100x1760x1400mm VACUFORMER XL Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x1780mm Overall dimensions LxWxH: 4100x2000x1400mm VACUFORMER XXL Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3880x2250mm Overall dimensions LxWxH: 4100x2400x1400mm Vacuum pumps: 40m³/h, 80m³/h, 100m³/h, 140m³/h Standard for VERTICAL models: • Hinged control cabinet on the right side • 4 FESTO pneumatic-cylinders • Trussed pressing frame • Two hand safety operation • Motion signal • Siemens pressing timer with alarm • digital pressure setting with tank PRESSING-HEATING-FORMING UNIVERSALFORMERS direct- honest-experienced

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Fpjdpsi Riwxefx Aikop Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Fpjdpei Rixkjfx Aiksp Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Fodpfx Aei Riywjikepp Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,350 kg, maximum load weight: 28,650 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, fifth wheel with 2 interchangeable kingpins Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without slide-out compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Tarp pole with bracket 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, colored line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck. Only on the base tires). Fedpfoi Riziox Aikjpp Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal "flashing side marker lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with a top profile that prevents bulk materials from shifting. Inside with a ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipper body shape Diaphragm - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roll-up cover on one side to be placed on the right, with central locking on the left Country of registration/Signs Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rust-through" Tipper body RAL optional, solid color Roll-up cover RAL 7035 light g

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design Fedpfx Aislthguokopp * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, Year of construction: 2015, Ride-on scrubber dryer, scrubber dryer, floor cleaning machine, mop machine, floor cleaner -Manufacturer: Hako, scrubber dryer with traction drive -Type: Scrubmaster B30 -Voltage: 24 V / 1.1 kW -Battery: 2x Hoppecke 12 V 80 Ah, see photo -Dimensions: 1250/780/H1100 mm Fsdpfsr Htncex Aikjpp -Weight: 151 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Z-type belt conveyor, type NDZ, available in various lengths and widths - High-quality aluminum profile, anodized, with grooves - Rubber-coated drive roller - Aluminum side guide, 50 mm high - PU conveyor belt with cleats, 30 mm high - Mobile substructure with adjustable angle - Motor protection switch with 5 m cable & CEE plug Fpsdpfx Asg Arxvoikop Available upon request: - Custom size - Timed control - Frequency inverter (€485) - Wavy edge (€492)

Condition: used, ALTO Encore L 2426 wet and dry vacuum cleaner / 24 VDC / 75A / IPX 3 / Weight 395 kg Fodpfjg Ngmxjx Aikspp

Condition: good (used), geared motor, electric motor -Power: 0.6 kW -Protection class: IP 22 -Price: per piece Fpedpfx Aisdwdrieksp -Quantity: 1 available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Fpodpfx Aiszbizskep Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Polystyrene disc: €600 net each

Year of construction: 2015, condition: good (used), We always have a large selection of various KÄRCHER scrubber-dryer machines of the types B40, B60, B80, B90, etc., in different condition levels and price categories. Contact us, and we will find the right machine for your specific application! You can also find sweepers and vacuum cleaners from KÄRCHER at our company! Fedpsfnqaujfx Aikspp

Condition: used, KUKA TEACH PENDANT EXTENSION CABLE Fpjdpfx Aish R T Efokjp 00-110-438 PLEASE CONTACT US FOR FURTHER INFORMATION!

Condition: used, Year of construction: 2023, _____For sale on behalf of a customer: Cultimer 500 R, manufactured in 2023, working width 5m, working depth 5-35 cm, transport width 3.0m, number of tines 16, number of leveling discs 16, NSM stone protection system, mounting category III and IV, HD liner roller with hydraulic height adjustment, wing shares, minimum power requirement 300 hp, location: null. Fsdpozdmumofx Aikepp

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 Fpedpfx Aszgggheikop * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,228 kg, maximum load weight: 29,772 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is for illustration only. Production and equipment are tailored to customer specifications. Chassis Lightweight high-tensile steel welded chassis with replaceable 2" kingpin. Patented curved front design. 24 t two-speed landing gear with single-side operation. Rear swing clearance approx. 2,100 mm (rear position) / 2,600 mm (front position). 2 wheel chocks with holders. Aluminium side underrun protection. Pneumatically folding rear underrun guard. Half-shell mudguards with anti-spray flap on the last axle. Rear towing hook. Axles & Suspension SAF 430 mm disc brake axles in off-road specification. Laser-aligned axle/suspension system for reduced tyre wear and fuel consumption. Air suspension with air pressure gauge. Automatic first lift axle with forced lowering and traction aid, also electrically operated from the tractor. Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System Dual-line air brake system with colour-coded air lines. Spring parking brake. 24 V EBS with front socket. Raise/lower valve. Electronic Stability Program (ESP). Automatic tipping lowering system with shut-off valve. TPMS (ECE R141) via EBS with display in the tractor. Axle load indication via EBS CAN bus. Tyres 385/65 R22.5. Electrical System 24 V LED lighting. LED front position lights. LED rear marker lights. LED side marker lights. 2 × 7-pin and 1 × 15-pin front sockets. Two recessed LED rear work lights. Hydraulics Low-pressure tipping cylinder (max. 170 bar), hard chrome-plated first stage. Hydraulic operation via PTO. Hydraulic connection with 48 mm HDK screw coupling. Body Round steel body in Stone Master Design, manufactured from wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Internal front access ladder. Aerodynamic Greenline tapered body design. External shovel and broom holder. Hydraulic rear tailgate with approx. 2,200 mm opening height. Tailgate protection cover and rubber seal. Heat-resistant up to 170°C. Side walls 4 mm, floor 4/5 mm, weight-optimised wear-resistant construction. Fpsdpfx Aezl Ez Uoikjp Cover System Fliegl S.T.E.P. swivelling front platform with folding access ladder (left side), in combination with Flip Top sliding cover. Electrically operated Flip Top cover with automatic rear locking bow, operated from the trailer or via radio remote control. 7-pin spiral cable to tractor included (tractor socket required).

Condition: used, functionality: fully functional, Comac LE 20 is a walk behind floor sweeper / scrubber is a walk-behind scrubber-dryer designed for maintenance cleaning of commercial surfaces, such as retail outlets and gyms, up to 1400 sq.m Fpjdpfx Aezl E Afeikjp

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Fpodpfx Ajzi Hchoiksp Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.