Used Roller Table for sale (23,495)

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations Kwsdpfx Adox U Eiajtjt - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Mechanical scissor lift table with roller device - welding positioner, vessel rotator Ideal base for 3D welding table Load capacity 800 kg (maximum load with fixed castors) Load capacity 2000 kg (maximum load without fixed castors) Platform size 1800 x 860 mm Usable lift max. 690 mm Table height - bottom position 770 mm (without top frame) Table height - top position 1460 mm (without top frame) Table height - bottom with locking bolt 830 mm (without top frame) Table height - top with locking bolt 1080 mm (without top frame) Top frame height 80 mm Load capacity of rotator approx. 400 kg Roller spacing / axle spacing 155 to 685 mm Axle distance to top frame 190 mm Kwodpfx Adox U Eh Notet Roller diameter 100 mm Roller width 40 mm - Scissor lift table is ideal as workbench, assembly fixture, welding table base, or with vessel rotator for pipe welding - Mobile on 4 polyamide rigid castors Ø 125 mm, 2 of which are swiveling with brakes - Height adjustment via trapezoidal screw spindle and hand crank - 4 locking bolts for height adjustment, hole spacing 50 mm - Removable table top with forklift pockets - Roller spacing of polyurethane rollers on rotator adjustable in perforated pattern - Very robust construction made of square profiles with 5 mm to 10 mm wall thickness Required space (L x W x H): 1800 x 860 x 1200 mm Weight without rotator 470 kg Weight with rotator 620 kg Very good condition

Condition: good (used), Spindle Moulder Manufacturer: Martin Model: N/A Year of manufacture: N/A Left/right rotation: Yes Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm 30 mm spindle Mechanical foot brake Includes: Kjdpfxoya Ddrj Adtjwt - Three-roll power feeder - Aigner fence jaws

Condition: new, 2000 mm Working width 400 mm Wheel width 400 mm roll diameter 60 mm Kwodpfx Asp S Ddbjdtjt number of rolls 8 Stck. work height max. 810 - 910 mm

Condition: new, 2000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm Kwjdpfx Adjtv Rgxotet number of rolls 8 Stck. work height max. 660 - 815 mm Colour blau / rot weight 150 kg

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Kjdpfegvkc Nsx Adtjwt The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m Kwjdpfxegvkkts Adtst The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs Kwsdpfsibw Sxjx Adtot - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of Kwsdpfx Aegvkdbodtst about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control Ksdpfx Adjgvkikstjwt - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Kjdpfx Adegvkfvstswt Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, Year of construction: 2024, table length 2000 mm Kwsdpfxjv Htkds Adtjt table width 1000 mm stroke height 400 - 1010 mm weight max. in kg 300 kg weight of the machine ca. 220 kg

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 800 - 950 mm Colour blau / rot weight 200 kg - straight version Kwjdpfeuap S Sox Adtjt - stable construction - high load-stable stability - Height-adjustable feet

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X Ksdegvkfyopfx Adtewt

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW Kjdpogvkgtefx Adtewt The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t Kwjdogvkk Nspfx Adtet dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Year of construction: 1991, condition: used, table load 3000 kg swivelling range 360 Grad vertical motion range 1380 mm stroke speed 1900 mm/min 360 ° total power requirement 4 kW weight of the machine ca. 5400 kg dimensions of the machine ca. 3800 x 3700 x 4200 mm Clamping plate distance: 2800 mm Kwodpfx Aovuz N Dsdtjt Support arm rotation angle: 360° - Operating instructions

Condition: new, Year of construction: 2025, material width 100 mm material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² Kwodpfx Adsurni Ujtot - Mobile use on casters - Operating instructions

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Kwsdpfx Aoh Evt Uodtjt Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, 3000 mm Kwodpfxetv Rf Uo Adtet Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 660 - 815 mm Colour blau / rot weight 200 kg - straight version - stable construction - high load-stable stability - Height-adjustable feet

Condition: new, 2000 mm Working width 600 mm Wheel width 600 mm Kjdpfotycqkjx Adtswt roll diameter 90 mm number of rolls 8 Stck. work height max. 800 - 950 mm Colour blau / rot weight 150 kg

Condition: new, 3000 mm Working width 400 mm Wheel width 400 mm roll diameter 60 mm number of rolls 12 Stck. work height max. 810 - 910 mm Kwodpfx Adsp S Ddfetjt

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Kwedpegvkc Tefx Adtot The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm Kwedpfxsgvkf De Adtst table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided Kodpfx Adjgvq Hletowt - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided