Used Robot Welding for sale (7,571)

Condition: excellent (used), Year of construction: 2011, pivoting range: 360 °, Welding manipulator SARTORE - PTA 12000 MACH-ID 9321 Make: SARTORE Type: PTA 12000 Year: 2011 Vario matic Rotation / Angle Remote control with Dro Very littles used incl. 2000 mm false chuck  CE-Marked  Table Ø: 2000mm Table load on 50 mm: 12000 Table load on 200 mm:10000 Table load on 400 mm:6600 Table load on 600 mm:4500 Table load on 1000 mm:3500 Rotation table: 360° Lifting chuck: 0 - 135° Table rotation: 0,02 - 0,4U/mm Length: 2980mm Width: 1980mm Height: 1800mm Hjdpjx H Rhxofx Afnjfc Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA Hedpfx Aexrknmjfnsfc - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request.

Condition: excellent (used), 3HAC085598-001 SxTPU4 (für IRC5) DEVELOPMENT OF GSG ROBOTICS Hfedpfsyhxqmsx Afnoc GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00566, load capacity: 10 kg, arm reach: 2,530 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB  4400L/10 manufactured in 2017.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4400L/10 Model Number: IRB Hodpfxsyg Hiwj Afnjfc Year of Manufacture Robot: 2017.05 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 2530 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1040   Controller: IRC5 Year of Manufacture Cabinet: 2017.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Hedpfx Afoyhxl Rensfc Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, Schtec WD 720 Double-Headed Corner Welding Machine for PVC Profiles For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles. This machine welds two corners simultaneously in one operation and is suitable for variable angles from 60° to 180°. Thanks to its highly accurate welding tolerance of 0.2 mm, the WD 720 delivers strong, tight, and aesthetically perfect joints – suitable for both white and colored profiles. Key Features: • Simultaneous welding of two corners • Variable welding options between 60° – 180° • Can also be used as a single-head welding machine • 0.2 mm weld seam limitation (for white and colored profiles) • Manual positioning of the movable head • Pneumatic braking system for stable fixation • Individually adjustable heating, temperature, and time parameters • Digital touchscreen control panel • Special heating plates for uniform heat distribution • Easy cleaning system for the heating plates • Durable Teflon system for extended service life • Specially designed jig system for more efficient operations Hodpfxsykkx Ds Afnjfc Application The Schtec WD 720 is ideal for medium-sized production companies seeking a reliable and precise welding solution. The combination of double-head welding, user-friendly operation, and high weld quality makes this machine suitable for series production of window frames.

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 4 kopslasmachine Schtec, Equipment: 4 in one shovel, Schtec Four-Head Welding and CNC Corner Cleaning Line for uPVC Windows For sale: Professional four-head welding machine with CNC corner cleaning unit from the brand Schtec, suitable for the manufacturing of uPVC windows and doors. This complete line is configured for serial production and is fully adjusted for the Dutch market to work with Deceuninck profile systems. As a result, the machine can be deployed immediately in Dutch window production without any additional modification. Specifications and Features: - Four-head welding machine – simultaneous welding of all four corners - CNC-controlled corner cleaning unit – clean, precise finishing - High dimensional accuracy and consistent weld quality - Suitable for various window and door sizes - Industrial design for continuous operation - User-friendly control system - Calibrated for Deceuninck profiles (Dutch market) This machine is ideal for companies looking to increase their production capacity or to upgrade and professionalize their current production line. The combination of four-head welding and automatic CNC cleaning delivers high output with minimal post-processing required. Hfodoykkw Tspfx Afnjc

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00565, load capacity: 20 kg, arm reach: 1,813 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA/20M manufactured in 2013.03. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA/20M Model Number: A05B-1222-B702 Year of Manufacture Robot: 2013.03 Hedpfeygquwsx Afnsfc Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1813 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2013.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2009, machine/vehicle number: R-00564, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, FANUC R-2000iB/165F manufactured in 2009.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/165F Model Number: A05B-1329-B201 Year of Manufacture Robot: 2009.05 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Hfodpeygqqlofx Afnsc Installation Type: Floor Mount Weight (kg): 1170   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2009.05 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00562, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/250F manufactured in 2011.07. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/250F Model Number: A05B-1329-B215 Year of Manufacture Robot: 2011.07 Warranty term (months): 12   Hfsdpfx Aeygqqfjfnoc Payload (kg): 250 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1270   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.07 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00529, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in 2014.04. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2014.04 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560 Hedpfx Ajygqp Uefnefc   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, current intensivity 140 A plate thickness 1,5 mm welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A Hsdpfxoxbtmds Afnjfc weight of the machine ca. ca. 90 Kg dimensions of the machine ca. 0,4 x 0,8 x 0,8 m

Condition: new, table diameter 800 mm table load 2 t swivelling range --> 95 Grad max. torque 1250 Nm table rotation speed 2 U/min Working height from to 550 - 1300 vertikal mm Working height from to 650 - 1400 horiz. mm total power requirement 2,53 kW weight of the machine ca. 930 kg dimensions of the machine ca. 1,85 x 1,66 m Video available on our website. Hedpfxek Rfwto Afnefc Electric 400 Volt Hand control panel Hydraulic-device Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2010, Assembly machine / production line The upper and lower parts were previously assembled and pressed together using this device. Components include: Kuka Scara KRC2sr robot, model year 2010 Pneumatic control system Electrical control system with frequency converter 4 conveyor belts Description: Robot type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Working space reference point: intersection point of axes 3 and 4 Weight approx. 20 kg Item condition: used Robot data sheet Control data sheet Financing through our bank is also possible. Hodpfx Ajglp Uyofnefc komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Hjdpfx Afoibx S Nensfc Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: ready for operation (used), Year of construction: 2025, overall weight: 58 kg, number of axes: 6, This 6-axis ELITE Robots CS625 was manufactured in 2025, featuring a payload capacity of 25 kg and a reach of 1500 mm. It includes a controller, teach pendant, and offers a protection class of IP54, with an optional upgrade to IP68. Ideal for versatile applications requiring precise movement and positioning. If you are looking to get high-quality robotic arm capabilities, consider the ELITE Robots CS625 machine we have for sale. Contact us for more information about this machine. Machine Benefits Hfodpfxeyi Advo Afnoc Qualitative Machine Benefits • New and still in original packaging • Comes with guarantee Technical Machine Benefits • Reach: 1500 mm • Repeatability: ±0. 05 mm • Protection class: ip54 (optional ip65/ip68) • Temperature range: -10°c to 50°c • Relative humidity: Extra Information Movement Joints rotation: J1-J6 ±360° Joints speed: J1-J2 125°/s, J3 150°/s, J4-J6 210°/s Typical TCP Speed: 2.0 m/s Tools Tool I/O connector: T1: M8, 8pin; T2: Ø 12.8mm, 4pin Tool I/O ports: 4 configurable DI/DO; 1 AI, 1 AO Tool I/O power supply: T1: 0 / 12V / 24V; 3A / 2A / 1A | T2: 24 V; 5A Tool I/O communication: RS485, Modbus RTU Machine-Specific Data Footprint: Ø 240 mm Material: Aluminum, steel, plastic, rubber Cable length: 5.5m

Condition: good (used), Year of construction: 2000, FANUC LR Mate 200i automation robot + R-J2+ handheld controller The FANUC LR Mate 200i is a compact six-axis robot that is ideal for a variety of manufacturing and system processes. The tabletop design of the LR Mate 200 allows it to be used in a variety of commercial and industrial applications while saving floor space. The LR Mate 200i offers maximum flexibility in a compact design. The LR Mate 200i's hollow joint design encloses all cable routing to prevent snagging, and absolute serial encoders eliminate the need for power-up calibration. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i has a wrist-integrated end effector connector, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard IP54 dust and liquid ingress package. It also has an integrated, internally mounted solenoid valve package. In addition, the 200i can achieve axis speeds of up to 480 degrees per second. Areas of application: Assembly, material handling, material removal, parts transfer Robot specifications Axes:6 Payload:3.00 kg H-reach:700.00mm Repeatability:± 0.0400 mm Robot mass:39.00kg Structure:Articulated Year built 2000 Robot movement speed J1180 ° / s (3.14 rad / s) J2180 ° / s (3.14 rad / s) J3225 ° / s (3.93 rad / s) J4400 ° / s (6.98 rad / s) J5330 ° / s (5.76 rad / s) J6480 ° / s (8.38 rad / s) Robot movement range J1± 160 ° J2+ 150 ° - 35 ° J3+ 165 ° - 150 ° J4± 190 ° J5± 120 ° J6± 360 ° Item condition: used Hfsdjwbqvfjpfx Afnjc Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2010, KAWASAKI YF03N ULTRA-HIGH-SPEED DELTA ROBOT The Y series robots are parallel type pick & place robots offering quality and reliability. Brand Kawasaki Type YF03N Year of manufacture 2010 Serial number YF0030012 Electrical connection 400 V Overall dimension L 2400 mm Overall dimension W 2350 mm Overall dimension H 2750 mm Description of the Kawasaki YF03N robot Type Parallel kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) *1 ± 0.1 Movement range (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) *2 0.27s (1 kg) 0.45s (3 kg) Hsdpeg T U Nbsfx Afnofc Other: 400 volt; camera; software; instructions; components; iron frame, with switch cabinet; 2x connection cable 5-pole; control panel E40E-A003 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 240 A, welding current (min.): 3 A, welding current (max.): 3,000 A, Selco Genesis 3000 MTE – MIG/MAG Pulse Welding Machine 3 Months Warranty Refurbished, tested, and ready-for-use Suitable for: Steel, stainless steel, aluminum, on site, daily welding work up to 12 mm. Not suitable for: Construction >12 mm, 3-shift production, welding at heights. Specifications: Hfedeyi Ud Ispfx Afnsc 300 AMP 380 Volt Pulse / Double Pulse Synergistic Water-cooled 2/4 stroke / 4 roller driven Bi-level Gas for current Soft start Pulse frequency Fixed programs / Program memory Crater filling Spot welding / Interval welding Electrode option Includes: 3-meter SB401 welding torch, ground cable with clamp, gas hose, and cart. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 8,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Parweld XTT202P ACDC – Gas-cooled TIG welding machine Hjdpfjyi Ubysx Afnefc 3 Months Warranty Refurbished, tested, and ready-for-use Suitable for: Daily ACDC welding work under 5mm, hobby, DIY, novice professionals. Not suitable for: Production welding, machine construction, construction above 5mm Specifications: • 200 AMP • 230 Volt • ACDC • Pulse • 2/4 stroke • Gas before current / Gas after current • Start current / End current • Up slope / Down slope • AC Balance / AC Frequency • Pulse Frequency / Bi level • Electrode option Includes: 8 metre PRO26 welding torch, earth cable with clamp, gas hose, and trolley. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Bosch Turbo Scara SR 800EC Robot + IQ 150 Controller + PHG 2000 Handheld Control Unit Manufacturer: Bosch Order No. 3842506428 Serial No. 764840020 Maximum load on gripper flange: 100 N 3rd axis stroke: 320 mm Pneumatic pressure 4-8 bar Weight: 100 kg Swivel range: see diagram Item condition: Used In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. A wealth of workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are available. A total of 24,000 m² of production space is being dismantled and sold. Hedpfohbmvpex Afnjfc Please also note our other offers. Payment is due within 7 business days of purchase. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, - Capacity horizontal 3000 kg - Capacity vertical 3000 kg - Table size 1400 mm - Electrically tiltable - Wired remote control - Digital display - Documentation Hfjdpfx Aspa Ugasfnsc - 400V

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Hsdpjub Umqefx Afnjfc Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: used, Year of construction: 2013, This Demmeler welding table is being auctioned online as part of our RESTLOS construction machinery auction "Plant Closure (Relocation) Part 2 - Elevator Works for Brandner Revalue GmbH - Heavy-duty shelving - Transport trolleys - Machines and equipment - Cranes - Workshop cabinets - Assembly tables - Welding curtains - Office furniture and much more," taking place in 73765 Neuhausen auf den Fildern. You will find this and many other items, including welding technology, workshop and production equipment from well-known brands such as Eurokraft, Fetra, Kaiser + Kraft, Krause, Bito, Garant, Denios, Würth, Beewatec, Gaerner, SSI Schäfer, Wini, König und Neurath, Steelcase, Soehnle, and Quipo, on our RESTLOS auction platform. Hsdpfsykqqyjx Afnjfc

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit Hfjdpfx Afeygqnkonsc DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.