Used Robot Cell for sale (7,091)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Csdpfx Aor Aka Aedxjhd Lifting capacity: 20kg Reach: 1726mm

Condition: used, Year of construction: 2017, Robot cell ABB robot with Clean Laser Manufacturer: ABB / Clean Laser Csdpfjwrcn Ujx Adxohd Type: IRB4600 Year of manufacture: 2017 System consisting of: ABB robot IRB4600 Control cabinet Handheld control unit Laser cleaning device Clean Laser type intelliScan30 TEKA extraction system 221025ä

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 TruBend 5130X Press Brake BendMaster Robotic Bending System Control System: TASC 6000 (robot and press are programmed via the machine interface) Press Brake Specifications: Press force: 130 tons Bending length: 3,250 mm Year of manufacture: 02.2016 Chedpfoxdfqmex Adxod More information and video available on request ...

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15,337 h, functionality: fully functional, GOM measuring cell ATOS 5 for sale from current location. Dismantling and transport are the responsibility of the buyer. Loading ramp available. The purchasing company must sign a sales contract, and the authorized signatory must complete a Postident verification. On-site inspection possible by appointment. The measuring plate by Witte shown in the pictures is not included in the offer! The original measuring plate belonging to the system is, of course, included and is unused. Sale only to commercial customers; prior sale reserved. Cedpfx Ajxdwqfjdxshd

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Csdpfx Adewypqljxehd Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: ready for operation (used), Year of construction: 2017, A robot automation cell WU Mechanische Werkstätte with a Fanuc robot for product handling for a lathe is available. Gripper system: double gripper, gripper manufacturer: Schunk, robot type: Fanuc M20iA 35M, robot axes: 6, max. payload: 35kg, robot reach: 1810mm, machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm, weight: approx. 2000kg. Lathe power-on time: approx. 34000h, servo-on time (cell): 5700h, mechanical operating hours: 615h. This is only the automation. Documentation available. An on-site inspection is possible. Chodpjxbhhcofx Adxod

Condition: excellent (used), Here we offer you an Omron SCARA industrial robot. Omron SCARA Industrial Robot with PB Programming Box R6Y XGL400 XG Series SCARA robots for industrial applications: - Higher reliability (no belts on XG series, no moving electronic parts). - High precision and speed - Minimal maintenance - Ease of use - High rigidity - Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Max. Payload range: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical data: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/-0.01 mm R: +/-0.004 Axis specifications: Csdpfx Aeh H D Rtjdxjhd Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/-140 º Y-axis +/-144 ° Z-axis -- ° R-axis +/-360 ° Type: R6Y XGL400150 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Dimensions: 5500x2750mm Height: 2400mm Chodpfx Aehtzgdjdxed

Condition: excellent (used), Year of construction: 2021, operating hours: 14,841 h, functionality: fully functional, Control: Fanuc 32i Automation: FMB UNIROBOT GP7-5Pkhs Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Knoll compact filter with hinged belt conveyor Year of manufacture: 2021 Hours: 14841h Hardinge GT27SP CNC lathe: Control: Fanuc 32i Axes: 2 (X and Z) Travel paths: From operating manual measured on tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine LxWxH: 1850 x 1750 x 1750 Weight: approx. 2100Kg MARPOSS measuring system with automated Dimension compensation Oil mist filter S400 on extendable stand 1525 - 2740mm Spindle cooling possible, currently out of service due to MircoCentric chuck FMB UNIROBOT GP7 Robot: YASKAWA GP7 Control: YASKAWA YRC1000 Jaws: 3 jaws double gripper system with integrated presser and blow-off unit Axes: 6 Machine No.: 11-210314 R 1889290 Year of manufacture: 2021 Dimensions of the robot cell LxWxH: 1850 x 900 x 2000 Weight of the robot cell: No exact details approx. 1000kg Turning station in the robot cell 5x workpiece pallets 400x600mm, side 1: 77 parts / side 2: 150 parts Knoll filter system KF110/570 with Knoll hinged belt conveyor type 320 S-1/50 Filter type: belt filter Serial number: 1513866 Year of manufacture: 2021 Tank volume: 570L Pressure: 5-30Bar Dimensions of the filter system LxWxH: 1800 x 900 x 1900 Weight: No information, estimated at approx. 500-700Kg. Chsdpovnt Dtofx Adxjd Grinding spindle: Jäger SF spindle Type: Z100-M536.03 K1,2S5GS Max. speed: 36,000 rpm Supply voltage: 3-phase 200V-480V AC 50/60hz Frequency converter installed in the control cabinet, operation via external control interface Grinding spindle holder RINECK grinding wheel holder Accessories / tools: 3x MAS-MEX20-GT27-1-S385H holder 3x MAS-MEX20 turn sleeve 3x MAS-turn ring 2x hydraulic expansion for internal extractor 1x hydraulic expansion for rotary holder + rotary holder 1x MARPOSS probe with holder

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Cedpfx Adsnr E Enexshd Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: excellent (used), Year of construction: 2007, A cell with an ABB robot IRB 340 M2004 Type B – 34-51225 One of the fastest pick-and-place robots of the decade Delta robot for fast feeding, detail recognition, and stacking Quantity: 10 units Chedpfx Adorbh Uxoxod Year of production: 2008 Controller: ABB M2004 Number of axes: 4 Pay capacity: 1 kg Robot weight: 140 kg Reception: Diameter - 1130 mm Height - 250 mm Turnover - unlimited The cell has two belt conveyors with a length of 65 cm and a width of 100 cm PRICE for a complete A-robot: €6,400/unit PRICE for a robot in a cell: €7,100/unit ⤵ (with image processing system and software)

Year of construction: 2015, condition: ready for operation (used), Welding robot: RV20-16 with turntable, welding source: Merkle High Pulse 551 RS, positioner: integrated welding positioner, cabin equipment: double station with high-speed doors, welding type: MIG/MAG welding. Machine dimensions X/Y/Z: approx. 3800mm/2400mm/2200mm, weight: approx. 3750kg. Including all available tools, spare parts and accessories. Documentation available. On-site inspection is possible. Chjdpfx Ajuiykqjdxod

Condition: good (used), dimensions: 4200x2750mm height: 2400mm Csdpfx Ashtzgpsdxjhd

Condition: excellent (used), Year of construction: 2007, load capacity: 5 kg, arm reach: 704 mm, Fanuc LR Mate 200 iC robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Control system: R-30iA MATE Number of axes: 6 Load capacity: 5 kg Reach: 704 mm Repeat accuracy: ±0.02 mm Csdpfx Adoqgck Doxjhd Robot weight: 27 kg Camera: Sony XC-56

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Cjdowc A Rdepfx Adxehd

Year of construction: 2008, condition: excellent (used), Robot cell for leak testing consisting of: Robot FANUC LR Mate 200iC/5L - 2008, Cedpfx Ajn D D E Todxshd Table for measurements, equipped with 8 light curtains, 2 pieces of Innomatec equipment for leak testing, type LTC - 502. The cell has a safety system and CE

Condition: excellent (used), Year of construction: 2008, load capacity: 1 kg, Cell ABB IRB 340 M2004 Type B Robot - 34-51225 Country of production: Sweden Production date: 2008 Control system: ABB M2004 Number of axes: 4 Load capacity: 1 kg Robot weight: 140 kg Range: Diameter - 1130 mm Height - 250 mm Rotation - no limit Cell dimensions: Length - 150 cm Cedpfeqffhhsx Adxehd width - 145 cm Height - 240 cm The cell has two belt conveyors with a length of 65 cm and a width of 100 cm.

Condition: used, Frame size: 4100 x 2520 mm Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm Csdsxct Anopfx Adxjhd

Condition: used, Frame size: 4100 x 2520 mm Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm Chjdpfexctwlox Adxsd

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, double-sided, rotational speed infinitely variable, type plate available, 2008 ACME Robotic Polishing Cell with Fanuc M-710i Robot – Fully Automated Metal Finishing Solution Looking for a high-performance robotic metal polishing system? Don’t miss this 2008 ACME Manufacturing Co. Robotic Polishing Cell, engineered for precision, consistency, and automation. Ideal for metal finishing, surface treatment, automotive, aerospace, or industrial manufacturing. 🔧 Manufacturer: ACME Manufacturing Co. 🚨 Machine Type: Robotic Polishing Cell 📅 Year of Manufacture: 2008 🤖 Robot Model: Fanuc M-710i 📍 Location: Ireland 📦 Condition: Good – fully operational and maintained 🟢 Availability: Immediate ✅ Machine Overview: This 2008 ACME robotic metal polishing cell is a fully automated surface finishing system equipped with a Fanuc M-710i 6-axis robot and designed for precision metal polishing in high-volume environments. Ideal for manufacturers in medical device, automotive, aerospace, general engineering, or stainless steel finishing sectors. 💡 System Includes: ✅ Fanuc M-710i Industrial Robot – Reliable 6-axis automation for complex polishing paths ✅ Two Twin-Head Polishing Stations – Simultaneous dual-surface processing ✅ Automatic Polishing Paste Delivery Units – Supports both fine and coarse pastes for optimal finish ✅ Vibration Monitoring Point – Ensures consistent surface quality and machine health 📈 Benefits: Increased throughput and reduced labor costs Repeatable, uniform polishing quality Fully automated and programmable – minimal operator input Compact, integrated cell for efficient floor space use Core Functionality Material Removal: The robotic system employs abrasive belts or wheels to remove material from workpieces, effectively smoothing edges, removing imperfections like flash, and achieving specific surface finishes. Precision and Repeatability: Unlike manual polishing, which can vary from part to part, robotic systems ensure consistent and repeatable results, crucial for high-precision applications. Versatility: ACME cells can be adapted for a wide range of materials and part geometries, including orthopedic implants, automotive components, and more. Chedextftyjpfx Adxsd Integrated Automation: These cells often feature part handling systems, like conveyors and dual-drawer arrangements, to enable continuous and unattended operation. Dust and Sound Containment: Built-in enclosures help confine dust and noise generated during the process, improving safety and environmental conditions. Key Features and Benefits Increased Production Rates: Robotic polishing can significantly increase the number of parts processed per hour compared to manual methods. Reduced Costs: By automating the process, companies can reduce abrasive media costs, labor costs, and potentially decrease scrap rates. Improved Safety: Robotic systems eliminate the need for operators to manually handle potentially hazardous materials and tools. Enhanced Consistency: Robots deliver consistent, repeatable results, ensuring uniform quality across all parts. Process Optimization: ACME cells allow for programmable belt speeds and other parameters, enabling optimization for different materials and finishes.

Year of construction: 2012, condition: ready for operation (used), A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible. Chjdexdm Uaopfx Adxsd

Condition: as good as new (ex-display), Year of construction: 2023, Robot application Robot type : FANUC M-20iD/35 Payload max : 35 kg Reach max : 1.813 mm Robot equipment Gripper exchange : Interface for quick manual gripper exchange Workpiece gripper : preparation for the attachment of a pneumatic workpiece gripper Blow-off device : prepared for workpieces incl. controlled pneumatic connection Turning station : Designed as a depositing station Workpiece storage Version : Drawer storage Capacity : 3 drawers 1,100 x 570 mm each 300 kg Chodpfxorcirre Adxsd Equipment : 1 set of standard inlays , 4-cornered sheet steel opening Workpiece sizes max (d x h) : 250 mm x 120 mm Worker protection : Safty Laser System Machine requirements Interface : Loader interface with direct door query Machine doors : Automatic doors Recommended machine equipment Tool : Tool life monitoring, tool breakage monitoring Workpiece : Workpiece support monitoring Flushing system : Fixture flushing Chip removal : Chip conveyor Gripper system Type : Single 2-finger parallel gripper Schunk PGN-plus 160-1 Gripper : Adjustable standard gripper fingers Gripper finger stroke : 16 mm per finger Workpiece dimensions (d) : 10 mm to 250 mm Workpiece weight max : 8.2 kG Clamping : Pneumatically actuated

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Chsdpfx Adexgqy Eoxod Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Our former assembly cell was only in operation for a few hundred hours (the exact number is unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage - apart from the batteries, which need to be replaced. The entire assembly/robot cell has the following dimensions: height: 169cm, width: 175cm (150cm + 25cm), depth: 130cm, weight: approx. 600 kg The most important elements of the assembly/robot cell are as follows: Mitsubishi robot mod. RH-6SH5520-S312, year of manufacture 2010 Cjdjri S Hkopfx Adxjhd Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Many details are visible in the photos and in the documents, for everything else we are happy to provide information.

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter Cedpop Am T Ujfx Adxehd - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch.