Used Road Network for sale (3,772)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images! The vehicle may be in use! Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm. BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h). Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Hedpfxjkyrmie Akiow Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031812, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 40 %, ground clearance: 310 mm, color: red, Please note: the images are archive photos! The vehicle may currently be in use. #Chassis – haulage semi-trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Slightly tapered outer frame, new design with "Load-Lock-Profil" for lashing strap attachment 24 t 2-speed landing legs, single-side operation, with half-round foot and straight mounting plate, with thrust compensation Pull-out ladder at the rear "D-Lock" door retainer for I-Lock closure 2 wheel chocks with holder Pallet box (capacity: 24 Euro-pallets) "Heavy Blocker" rear underrun protection, transverse + lateral roller-type impact buffer 1 plastic tool box, w=600 / h=425 / d=460 mm Storage compartment for 32 slat boards under the loading floor Pallet stop on both sides, approx. 15-20 mm high, bolted design #Axles & suspension BPW disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally operable electrically from the truck, including forced lowering and pull-away aid Hedpfx Akozxz R Seijw #Braking system 2-line air braking system Colour-coded pipework for easy servicing Spring-loaded parking brake 2 anti-mismatch coupling heads at the front 24V EBS, electronic braking system with EBS socket at the front with lift & lower valve + auto-reset function Vehicle stability system #Wheels and tyres 385/65 R22.5" Polished aluminium rims, Alcoa Dura-Bright #Electrics 24V, LED multi-chamber lights, yellow LED side marker lights, number plate light 2 white LED front position lights 2 white/red LED outline marker lights at the rear 1 x 15-pin socket at the front LED work lights on both sides 2 additional LED work lights at the rear #Floor Plywood flooring approx. 30 mm thick, on longitudinal bearers for high point load capacity, for forklift axle loads up to max. 7100 kg Steel sheet covering fitted at the rear over approx. 300 mm Premium floor sealing – floor sealed all around #Front wall / front corner posts 2580 mm high, steel corner posts of box-section design, release mechanism for the side curtain at the front wall Crash-Blocker, steel impact protection on the lower inside, approx. 140 mm high #Centre posts 3 pairs of sliding posts, movable along the entire length 3 pairs of post positions #Slat boards Aluminium V-profile slat boards #Rear wall / rear corner posts Rear corner posts, steel, up to roof edge, curtain attachment with round tube and curtain tensioning ratchet Rear barn doors, 2-leaf Fliegl "I-Lock" integrated door lock, awarded the "iF Design Award" #Roof "Fliegl-Blitz-Verdeck" Sliding roof, rear end bow foldable, roof sheet slides from rear to front, L-shaped roof rail as used in the automotive industry Roof non-elastic, minimal deflection of the roof rail Anti-Ice System, with 1 central hose, automatic forced venting via the brake light Optimum rain gutter at the rear #Country of registration / plates Type approval per EC 2007/46 Fliegl manufacturer's certificate for body strength per EN 12642 XL Fliegl manufacturer's certificate for load securing per VDI 2700 sheet 12 ff. Warning board per ECE-70 Please note: archive photos!

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Hedpfxez Tdbhj Akiow Working speed 7.5mm/s Return Speed 50mm/s Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller X & R axis auto set , Z axis manual set Light guard

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5381-2013, Year of construction: 2013, load capacity: 1,600 kg, fuel type: electric, battery model: DIN 43535, 3PzS or 4EPzS types, remaining battery capacity: 90 %, battery voltage: 24 V, fork carriage width: 800 mm, fork length: 1,195 mm, turning radius (outer): 1,780 mm, overall weight: 1,540 kg, total height: 4,790 mm, total width: 880 mm, Equipment: pallet forks, Doosan LEDS16IP — 1.6t electric platform stacker General Drive: Electric, walk-behind Capacity (Q): 1.6 t (1,600 kg) Load centre distance (C): 600 mm Load distance (X): 836 mm Year 2013 Serial Number 5381-2013 Max. mast height 4,790 mm Unladen weight incl. battery: 1,540 kg Initial lift (h5): 120 mm Overall width (b1): 880 mm Fork dimensions (thickness/length): 185 / 1,195 mm Outer fork spread (b5): 575 mm Aisle width for 800×1200 pallet, lengthways (Ast): 2,520 mm Turning radius (Wa): 1,780 mm Hodpoz Tdirofx Akiew Performance Travel speed, laden/unladen: 9.0 / 10 km/h Travel speed, pedestrian/stacking mode: 5 / 3.5 km/h Lift speed, laden/unladen: 0.13 / 0.20 m/s Lowering speed, laden/unladen: 0.49 / 0.23 m/s Gradeability, laden/unladen: 6 / 8 % Electrics Drive motor (AC): 2.3 kW Lift motor (DC): 3 kW Battery: 24V, up to 500 Ah (DIN 43535, 3PzS or 4EPzS types) Max. battery weight: 400 kg Controller: AC pulse control (drive and lift)

Condition: used, mileage: 97,000 km, power: 90 kW (122.37 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,100 kg, next inspection (TÜV): 03/2026, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,750 mm, loading space width: 1,600 mm, loading space height: 1,330 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Hede Agf Iwopfx Akiow Audio navigation system NAC 3-D, DAB with color display, parking assistance system front and rear including reversing camera, increased payload, tailgate, fixed rear window, wooden floor in the cargo area with anti-slip profile and side paneling (wood) with wheel arch lining, cargo area partition with window, sound and heat insulation, side airbags front, auxiliary heater Additional equipment: Airbag driver/passenger side, double passenger seat, on-board computer, driver assistance system: hill start assist, body/structure: panel van, lumbar support for driver's seat, adjustable, steering column (steering wheel) adjustable, engine 2.0 L - 90 kW Blue-HDI FAP, wheelbase 3275 mm, spare wheel with road tires, low emissions according to emission standard Euro 6, sliding door right, SCR system (AdBlue technology), side protection strips in body color, visibility package, driver's seat adjustable in height, seat cover / upholstery: fabric, steel rims 7x16, start/stop system, socket (12V connection) in the cargo area, socket (12V connection) in the center console, seat heating The vehicle is in good condition! Internal dimensions of the cargo area: L 2.75 m, W 1.60 m, H 1.33 m Last inspection at 96,028 km FIXED PRICE, minor hail damage to the hood Only 1 vehicle key Financing possible via Santander Bank

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Hedpfx Ash U Rzgokisw Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 1996, spindle speed (max.): 4,200 rpm, spindle speed (min.): 60 rpm, Bridgeport 2HP Milling Machine Vari speed Spindle speeds 60-4200rpm Table size 42" x 9" Chrome bedways Powered Traverse X Axis 2 Axis DRO Led work light Coolant pump & system Spindle Taper R8 Reground table as photos Metric leadscrews Hodpj Adrq Rjfx Akiew Power 3phase 400v

Condition: defective spare-parts repository (used), functionality: not functional, overall weight: 39,500 kg, Year of construction: 2023, operating hours: 4,000 h, On behalf of our client, we are offering this Rubble Master RM 120X compact crusher, available as fire damaged insurance salvage. The machine has sustained fire damage around the engine bay. The rest of the unit appears to have been less affected. Year: 2023 Hours: 3,805hrs (Nov 2026) Hedpfx Ae Adv E Eokisw Location: Rochester For questions or more information, please call us, or send a message.

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Hjdpfx Ake Ad Iy Ioijw Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2009, operating hours: 7,700 h, functionality: fully functional, mileage: 7,700 km, overall weight: 5,050 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 5,050 kg, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, adjustable chassis, all wheel drive, hydraulics, low noise, rubber tracks, MGC.pl – professional sales and service of VERMEER machines! We specialize in the sale and service of professional VERMEER horizontal directional drilling rigs. We provide expert technical advice, assistance in selecting the right equipment, and service support. We also offer other VERMEER drilling rig models. VERMEER NAVIGATOR D20x22 SERIES II – 2009 VERMEER NAVIGATOR D9X13 SERIES II - 2012 VERMEER D24x40A - 2003 We offer for sale a professional VERMEER D20x22 II NAVIGATOR horizontal directional drilling rig from 2009, manufactured in the United States. The machine comes from its first and only owner, who has used it continuously since it was new until the cessation of their business operations. We have a flushing system available for this DRILLING RIG, which is not included in the PRICE. Engine - Model: Kubota 3800 Turbo - Type: Turbocharged diesel engine - Power: 62 kW / 83 hp, approximately 84 hp - Maximum idle speed: 2400 rpm Hjds Ad I Huspfx Akijw - Engine oil capacity with filter: 8.5 l - Fuel tank: 95 l Drilling parameters - Maximum spindle torque: 2983 Nm - Maximum spindle rotation speed: 205 rpm - Thrust force: approximately 89 kN / 9.07 t - Pull force: approximately 89 kN / 9.07 t - Minimum bore diameter: 9 cm - Carriage travel speed – fast range: 41 m/min - Carriage travel speed – slow range: 27 m/min - Automatic rod feeder: yes Drill rods - Type: Vermeer Firestick® I - Single rod length: 3 m - Rod diameter: 52 mm - Single rod weight: 27 kg - Minimum bending radius: 31 m - Rod magazine capacity: 107 m total length Flushing and hydraulic system - Maximum flushing pump capacity: 95 l/min - Maximum flushing pressure: 52 bar - Hydraulic oil tank capacity: 87 l Dimensions, weight, and travel - Maximum length: 541 cm - Transport length: 508 cm - Width: 119 cm - Height: 193 cm - Catalog weight: 4808 kg - Maximum travel speed: approximately 4 km/h EQUIPMENT Hydraulic drilling system Track-type undercarriage Operator station with seat Drill rod magazine Hydraulic drilling mast Anchoring and stabilization system Control system for working functions Design adapted for professional trenchless operations APPLICATION The VERMEER D20x22 II drilling rig is used for: Construction of fiber optic and telecommunications networks Installation of water supply systems Construction of gas networks Laying of power cables Installation of pressure sewer systems Construction of culverts under roads and railway tracks Implementation of infrastructure projects using trenchless methods GREATEST ADVANTAGES OF THE OFFERED MACHINE 1 OWNER SINCE NEW – the machine remained in the hands of one company throughout its service life. SALE DUE TO CESSATION OF BUSINESS – the previous owner has ceased operating the business. INSPECTION REPORT: The machine has been tested for various functions and is fully operational. There are no leaks. The engine runs smoothly, both when warm and cold. The hydraulic system also has no significant play or leaks. The stated price is net and applies to export and for companies. A substantial discount is possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Condition: used, Year of construction: 2004, Doosan Mecatec S550LM Slant Bed CNC Lathe with Fanuc Series 21i – TB CNC Control, Swing Over Bed 710, Distance between both Centres 1230mm, Max Turning Diameter 480mm, Max Turning Length 1130mm, Spindle Speeds 30 – 2500rpm, 12 Tools VDI40 Turret, X Axis Travel 300mm, Z Axis Travel 1150mm, Live Driven Tools, C Axis, Machine Weight 8000kg. S/No. LNY – 1008 (2004). Country of Origin: Korea Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Hodpfxs Afm Dus Akiow

Condition: used, Year of construction: 2008, Citizen A20 VIIPL CNC Swiss Multi-tasking Turning Centre. S/No. ACO 118 (2008). Country of Origin: Japan, Maximum Spindle Speed 10,000rpm, Ø10mm Maximum Drilling on Main Spindle with Iemca Smart 320 Type 32 LL Automatic Bar Feeder, Ø3-20mm Capacity. S/No. 020805RA01 (2008) Country of Origin: Italy Hedps Afncxofx Akiew Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: like new (used), functionality: fully functional, mileage: 592,000 km, Equipment: ABS, air conditioning, airbag, blind spot assist, central locking, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, navigation system, parking air conditioner, parking heater, power assisted steering, seat heater, traction control, Road Tractor MERCEDES BENZ 1845 Year 2016 592,000 km Hsdpfxs Afyvqe Akisw Valid mining permit and roadworthiness certificate Very well-equipped, with numerous options In very good condition.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Hjdpfx Aks Afxuloiow Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE

Condition: used, Year of construction: 2023, Nakamura Tome AS200L Twin Spindle Turning Centre 5 Axis Machine wtih Nakamura Tome Fanuc CNC Control, Hainbuch Spanntop Mini AXFIX6S Collet Main Spindle, Buck BB206 3 Jaw Chuck Sub Spindle, 15 Position Driven Tool Turret, Renishaw Tool Setting Probe, Parts Catcher, Hydrafeed Multifeed 6S Barfeed, LNS Swarf Conveyor, Filtermist 5800 Oil Mist Filter, Coolant Tank, Transformer. S/No. KL205307 (2023) Hodpfxe Afmi Do Akijw Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: new, color: orange, Flail mowers equipped with sidsift, mechanical or hydraulic. The flail shaft is equipped with hammer flails. Available in category I and II for the 3-point linkage. Equipped with a roller at the back to determine the cutting height. Hjdpo Af Tgpefx Akisw Condition: New

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Hsdpfx As Agvnkjkiew Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Retrofit capability for max. 2 additional LLK outputs

Condition: new, power: 4 kW (5.44 HP), Professional sweeper with hydraulic wheel and brush drive. Optimal working range due to the narrow width, maneuverability and weight distribution. Pendulum brush for uneven terrain. Suitable for medium-sized surfaces +/- 3000 m². Large tires for grip and ground clearance. 5.5 hp Honda engine, larger engine and diesel on request. Various options such as: collection box, manure blade, snow blade, side brush, speed control, riding seat, etc. Condition: New Hedpfx As Af Uq Hokiew

Condition: used, Year of construction: 2008 Hsdpfx Ake Af Tu Deiow

Condition: used, New: Yes Year of construction: 2010 Colour: Orange Empty weight: 1.150 kg Working width: 255 cm Availability: in stock Required tractor power: 82 hp Hodpo Af Tu Sofx Akiew PTO rotation speed: 1000 rpm

Condition: used, power: 34 kW (46.23 HP), Year of manufacture: 2018 Operating hours: 607 Make of engine: Kubota CE mark: yes Hodpo Agyd Eefx Akijw EPA Marked: yes Production country: DE Please contact Kristoff Van Havere for more information - Perfect condition

Condition: used, operating hours: 12,400 h, lifting height: 8,050 mm, free lift: 2,730 mm, fuel type: diesel, mast type: triplex, fork length: 1,190 mm, fork width: 1,530 mm, total height: 2,830 mm, total length: 5,250 mm, total width: 2,100 mm, color: yellow, Year of manufacture: 2017 Empty weight: 12.820 kg Lifting capacity: 7.000 kg - Year: 2017 - Documentation available: Yes - CE marking present: Yes - Serial number: 9233 - Operating hours: 12400 - Lifting capacity: 7000kg - Lifting height: 8050mm - Overhead clearance: 3730mm - Free lift: 2730mm Hjdjzwc S Uopfx Akisw - Fork length: 1190mm - Maximum fork width: 1530mm - Minimum fork width: 590mm - Attachment: Fork positioner - Options: Work lights, Air tires, Heating, Joystick, Free-lift, Full cabin - Mast: Triplex - Drive: Diesel - Driving direction: 2 Road - Transport dimensions: 5250mm x 2100mm x 2830mm (l x w x h) - Transport weight [kg]: 12820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, functionality: fully functional, Year of construction: 2026, BPM-120 CRACK SEALING MACHINE TICAB LLC (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces: the BPM-120 crack and joint sealing machine. Main Application: The BPM-120 fills cracks and joints on asphalt roads, parking lots, sidewalks, airfields, and other road infrastructure facilities. Designed for small- and medium-scale projects! BPM-120 Technical Specifications: • Bitumen emulsion tank: 120 liters • Bitumen pump: capacity up to 10 l/min, working pressure up to 5 bar • Feed system: manual spray wand + 2 m hose (non-heated) • Mixing: manual • Bitumen heating system: diesel burner • Temperature control: automatic (maintains preset temperature) • Purge system: allows cleaning of hose and spray wand after work is completed Thoughtful design for your comfort and safety! Advantages of the BPM-120 model: • Compact size and mobility • Easy to maintain and operate • Direct heating with diesel fuel (no oil layer) • Energy-efficient fuel consumption • High-quality crack and joint sealing ensures pavement durability • Simple construction guarantees reliability in operation Price: • €13,000 without trailer • €15,200 with trailer Delivery Terms: • Production time: up to 20 business days after order confirmation • Warranty: 12 months • Delivery: from the manufacturer’s warehouse • Support: manual, technical assistance, video instructions Hsdevrialopfx Akiew Contact us today for a personalized consultation! Choose equipment that delivers results — send your inquiry now!

Condition: new, Pressure pipe to bridge a road without hindering traffic. Ideal during drag hose fertilization or water and sludge transport. Hedpfx Ake Aghftoijw Status: New

Condition: excellent (used), Year of construction: 2024, Traverses X Y Z: 660mm x 406mm x 508mm, Hsdpfx Aoz Hayrekisw table size 762mm x 356mm, 10000rpm spindle, 20 station ATC, DIN40 spindle taper, Hurco WINMAX 5 control, coolant, Swarf Auger