Used Rims for sale (2,793)

Condition: excellent (used), For sale: a set of 4 professional Tyco Electronics Premium CERTI-CRIMP crimping tools, used in the electronics industry, automation, and wiring harness service. The equipment comes with full documentation (eDB cards) – ready for operation, each crimping tool assigned to a specific connector type. Kjdpfxow Slhie Ag Ujdg

Condition: used, Complete primary crusher plant LOKOMO K140 single-toggle jaw crusher, inlet: 1,400 x 1,200 mm, up to 820 t/h Including one set of unused crushing jaws with feed hopper, LOKOMO B16 vibrating feeder, LOKOMO B13 discharge chute, and steel structure Ksdpfxswcyh Hs Ag Ujdg

Year of construction: 1992, operating hours: 100 h, condition: used, functionality: fully functional, Description Corner crimper for pressing profiles with a height of up to 68 mm. Extremely high pressing force achieved by a large-volume bellows cylinder (maintenance-free). The machine is easy to adjust and operate. Counter bearing pneumatically positionable with mechanical locking Support arms and pressing blades included as standard Kedex Rvl Rjpfx Ag Uodg Two-hand operation for safe use Options Additional support Special pressing blade Technical Data Pressing height: 68 mm Pressing force: 40 kN (4 t) Drive: Pneumatic Compressed air supply: 7 bar Air consumption per cycle: 30 l Dimensions (L × D × H): 650 × 820 × 1,270 mm Weight: 205 kg

Condition: used, Year of construction: 2023, Opportunity to buy an outstanding fiber laser (Year 2023) with 6000x2000 mm working dimensions and 6000W laser output. Power on hours: 14500 Cutting hours: ca 4900 Can be inspected under power upon appointment. Availability: 03/2026 More detailed information on request. Kodpexyxcusfx Ag Usdg X: 6320 mm Y: 2,200 mm Z: 150 mm Fiber laser source: 6000W Axis speed: 130 m/min (trajectory 180 m/min)

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm Ksdjh I Ahxepfx Ag Ujdg smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: used, Year of construction: 2003, functionality: fully functional, rotor length: 1,100 mm, For sale P.R.T. shredder used for pre-shredding polyethylene. Italian manufacturer. In good condition. Without standing knives. With hydro drive and with electric control cabinet and stand. Shredder dimension LxWxH 2550 x 1200 x 2460 mm Stand dimension LxWxH 2450 x 1680 x 2700 mm Drive dimension LxWxH 1600 x 1200 x 1300 mm Kdjdpfjx Rqacjx Ag Ujg Rotor dimension LxW 1100x700 mm Please check our other machines for sale. (Extruder, grinder, chiller, washing line...)

Year of construction: 2000, condition: used, Drais Mannheim / Lödige CoriMix® CM Continuous Ringlayer Mixer Type: K-TT 700 Motor: 55 kW 1500rpm Kdodpoh H S Hdsfx Ag Ujg Fully Stainless execution

Condition: used, Year of construction: 2011, Perfect binding line Wohlenberg Quickbinder - Trim-Tec 45i Year: 2011 Consisting of Perfect binder Wohlenberg Quickbinder Year: 2011 The Quickbinder from Wohlenberg is intended not only for expanding smaller-sized companies making the jump to quality book binding applications, but also for large, industrial-scale book binding companies who can utilize the machine for the production of superior, high-quality samples and editions. Description: - Motorised setting - Colour monitor with touch screen: Navigator - Solo perfect binder - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - Hotmelt side glue unit - Rotary cover feeder - Nipping and pressing station - Lay down device (to the left) Transport system - Escape delivery Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Kdjdpew Uxpxsfx Ag Uog Description: - Infeed conveyor from the right - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) - Belt delivery - Waste removal conveyor: Bush KF 110- 80 Year: 1998

Condition: good (used), Built in: 2000 Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 7.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device Equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools Kodpfxsxxi Npj Ag Uodg • 1 spare part catalogue • standard equipment

Condition: excellent (used), WEILER PRIMUS Type MD-G - Centre height: 125 mm - Centre distance: 400 mm - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix with tool holders - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Dimensions: Kodpfxjxw H Dbo Ag Uedg LxWxH 1.3x0.8x1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Kdsdpfx Agowuthwj Uog Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Üstünkarli cross-cut saw, used. Parallel board edger Kdjdpfx Aexd U Afsg Uog Hydraulic adjustment Adjustable bushing, slat bushing Roller table with control lever, cross conveyor and material chute Infeed rollers, control panel Type UDKY Lascmsw Rlmioxgtzrjg Cutting height ≈120 mm Cutting width ≈800 mm Blade diameter Ø 350-400 mm

Condition: used, Year of construction: 2000, Saddle stitcher Müller Martini Prima Year: 2000 The PRIMA from Müller Martini is the ideal saddle stitcher for the versatile bookbindery, where the shortest changeover time are decisive. - Number of chain stations: 9 - Horizontal signature feeders: 7 x 370 - Cover feeder: 1529 - Excluding pump(s) Stitching unit Müller Martini 390 Kedpovxf Sqofx Ag Usdg - Oblique sheet control - Thickness control - Stitching heads: 2x HK 75 - Reject gate, for incomplete products Trimmer Müller Martini 360 - Sets of knives: 2 Delivery Müller Martini 310 CS-14 - Compensating stacker Description modified on 29-5-2025!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 50 mm, product length (max.): 330 mm, product width (max.): 330 mm, production capacity: 1,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Three-knife trimmer for high productivity: up to 1,000 cutting cycles per hour! TECHNICAL DETAILS Cutting thickness: 2 – 50 mm Number of knives: 3 Kdjdpfxexlzuqj Ag Uog Untrimmed format: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm Trimmed format: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm MACHINE DETAILS Dimensions (L x W x H): 2,260 x 1,160 x 1,600 mm Weight: approx. 1,530 kg FEATURES User-friendly LCD display Flexible processing of various product sizes Fast changeover times of less than 10 minutes Advanced locking system for operator safety

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Kdedpekvnumofx Ag Ujg Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Kedpfxokvnuue Ag Ujdg Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: not inspected (used), For swaging the louvre ends in shutter manufacturing. Kdodpfxjxuf Rbe Ag Uog

Condition: new, Year of construction: 2025, operating hours: 822 h, functionality: fully functional, machine/vehicle number: 035, total length: 1,000 mm, total width: 1,000 mm, total height: 1,250 mm, overall weight: 150 kg, Equipment: documentation/manual, Traktorikäyttöinen puunkuorimakone Kdsdpfxox N Urge Ag Usg Esim latopuille.

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Kdedpfx Agov I D Shs Usg Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table

Condition: used, functionality: fully functional, In this offer you buy a used booklet trimmer ‘Canon booklet trimmer F1’ Object of sale: Kodpfx Agjv Dfv He Uedg 1 x Canon booklet trimmer F1: Suitable for various Canon models We also have other finishing options and printing machines in stock. Please feel free to contact us! Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Ksdpfxswpd Tyo Ag Ujdg For further information you can of course also contact us personally.

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam Kdjdpfsx Hyhbox Ag Ueg • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: used, Year of construction: 2006, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: CM 150-001, For Sale: Columbus McKinnon Barclay Tire Shredder Looking for a powerful and reliable machine to downsize tires? Then this Columbus McKinnon Barclay tire shredder is exactly what you need. Specifications: • ✅ Model: CM Barclay • ✅ Application: Reduces tire size • ✅ Shredding chamber width: 150 cm • ✅ Motor: Flender motor   o Power: 37 kW Kdjdpfjxc Envex Ag Uog   o Speed: 1470 rpm Usage & Maintenance History: • In use: from 2006 to 2011 • Very little use: between 2016 and 2022 • Completely overhauled in 2016, including:   o New shafts   o New bearings   o New blades   o New scrapers Why choose this shredder? The Barclay shredder is renowned for its durability and efficiency in processing tires. Thanks to the complete overhaul in 2016 and minimal usage since then, the machine remains in excellent condition and is ready for immediate operation.

Condition: used, functionality: fully functional, In this offer you buy a used 2-Knife Trimmer ‘SDD B4K/BT25 2-Knife Trimmer for Xerox’ Object of sale: 1 x SDD B4K/BT25 for various Xerox machines Counter readings: Total: Approx. 37,158 cuts Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Kdedpfju S An Dsx Ag Usg The device has been tested for function A test brochure can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), functionality: fully functional, In this offer you are purchasing a ‘Canon RCT 2 / II’ finishing option as good as new Object of sale: 1 x Canon RCT II suitable for various Canon models Counter readings: Total: Approx. 555 pages Ksdpfx Agsu Rbb Ns Ujdg Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.