Used Rim for sale (2,761)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, sheet thickness (max.): 120 mm, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Station 1: Sanding belt Station 2: Rotary brush Station 3: Rotary brush Min. sheet thickness: 0.5 mm Max. sheet thickness: 120 mm Lodoy Hhp Tepfx Akweah Working width: 950 mm Working height: 0.5-120 mm MACHINE DETAILS Power: 39 kW Control: CNC Number of stations: 3 Dimensions & Weight Dimensions (L x W x H): 3,940 x 1,980 x 2,010 mm Net weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, film width: 422 mm, machine/vehicle number: 860, TECHNICAL DETAILS Number of punches: 3 Film width: 422 mm Maximum depth: 110 mm Tool: 4-part tool (245 x 175 mm) MACHINE DETAILS Electrical data Mains voltage: 230/400 V Frequency: 50 Hz Rated current: 25 A Rated power: 16 kW EQUIPMENT Thermoforming for rigid subfilm Laodpoxruc Iefx Akwsh Rolls for plastic waste Gas mixer

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Ljdox Eg T Espfx Akwsah

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected while powered on. Technical data: Center distance: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Lajdpfex Htf Hjx Akwoh Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 5 Wittmann temperature control units are available for sale; the price is for 1 unit. Medium: Water Operating temperature: max. 90°C Lajdpfoy In Dysx Akwjh Heating capacity: 9 kW Cooling capacity: 25 kW

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Müller Martini Primera C130 gathering machine Year of manufacture: 2007 (2013) - 6 flat-pile feeders 0379 (2013) - sequential on/off switching - 1 cover feeder 0507 (2013) - ASIR 3 - SEMKO at the front and rear Lodpozdytcofx Akwoah - First copy control - 1 stitching head 0383 (retrofitted, status 2013) - 2 standard stitching heads HK 75Q - 2 loop stitching heads HK Oe Q6/8 - 1 three-knife trimmer 0449 (retrofitted, status 2013) - 1 central trimming unit - 1 cross-laying unit Perfetto - PIAB air system

Condition: used, Year of construction: 2001, Saddle stitcher Müller Martini Prima Amrys Year: 2001 (2018) Modernized in 2018 with a new B&R control system. Operation / Control - Digital display - Semi automatic setting Feeders - Number of chain stations: 12 - Horizontal signature feeders: 9x 370 (7x 2001, 2x 2006 - ASIR Automatic Signature Image Recognition: Asir III - Card gluer: 0423.0420 - Hotmelt glue unit: Robatech Concept B 5/2 - Cover feeder: 1529 (2002) - The feeder stations are without AMRYS. - Semco side thickness control: 0333.0426 - Pump(s): Air-centre Stitching unit Müller Martini Prima Amrys (0390) - Oblique sheet control - Stitching control - AMRYS automatic make ready system - Stitching heads: 4x HK 75 - Delivery to the left - Reject gate, for incomplete products Trimmer Müller Martini 0361.0435 - AMRYS automatic make ready system - Sets of knives: 2 - Center cutting device Lsdezhucyspfx Akwoah Delivery Müller Martini Pratico 7524 Year: 1999 - Compensating stacker - Delivery to the left - The stacker is not equipped with AMRYS. Max. mechanical speed: up to 13.000 cycles/h Maximum size (uncutted): max.: 480 x 320 mm Maximum size (cutted): max.: 475 x 300 mm Minimum size (uncutted): min.: 153 x 108 mm Minimum size (cutted): min.: 148 x 105 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), IBR Measuring Technology IMB-im2 measuring module for connecting 2 inductive probes, serial no.: 00250215, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lasdpozt H Husfx Akwjh

Condition: ready for operation (used), IBR measuring technology, IMB-im4 measuring module for connecting 4 inductive proximity sensors, SN 00256814, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lasdpfozt H Hzjx Akwoh

Condition: used, Year of construction: 2011, operating hours: 90,000 h, functionality: fully functional, machine/vehicle number: 318.03.11, For sale is a BOKI MERIMAT stud welding machine, manufactured in 2011. Ljdjzn Hiropfx Akweah The unit is fully functional and was integrated into a sheet metal processing facility in an industrial plant until July 10, 2026, and has 90,000 operating hours.

Condition: good (used), Turning diameter 160 mm Turning length 500 mm Swing diameter over bed 400 mm Swing diameter over cross slide 220 mm Ljdozwpl Iepfx Akwoah Main spindle Main spindle bore 51 mm Spindle speed 5,000 rpm Bar diameter 42 mm Chuck diameter 160 mm Number of tool positions 12 Tailstock quill stroke 50 mm Tailstock spindle taper MK3 Travel - x 250 mm Travel - z 550 mm Total power requirement 30 kW Machine weight approx. 4,000 kg

Condition: new, Hiwin linear motor – main component LMFA54 with water cooling, HY050210, unused, in opened packaging, 100% functional, scope of delivery as shown in the photos. Laodpfxezwtnaj Akwoh

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. Lajdozmx Scjpfx Akwjh DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: defective spare-parts repository (used), Year of construction: 2015, The equipment is incomplete and is being sold for parts. Laedpfxoyhb S No Akwjh

Condition: used, functionality: fully functional, Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Ljdewcxf Djpfx Akwjah Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: reconditioned (used), functionality: fully functional, used beating and stirring machine / planetary mixer Bear / Bär Varimixer AR60/MK1, overhauled, 60 liters, with bowl and 2 tools, 1.9 kW, 4.9 A, 50 Hz, 400 V, machine no. 60001933 Lajdpow Hulzjfx Akwjh

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces Ljdpfow Rcmyox Akwjah - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 060900759, WITH TRIMMER p/n: 2654000N Lodsxcaphspfx Akwjah Format: to SRA

Condition: used, Dreimesserautomat von Heidelberg in einem guten Zustand. Ljdpfx Akjxdc N Tewjah Three Knife Trimmer of Heidelberg in good condition. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH primary impact crushers are among the most preferred solutions among rock crushing machines, offering high efficiency and superior crushing performance. They deliver excellent results in crushing soft and medium-hard rocks, limestone, marble, and similar materials. These crushers enable a high percentage of cubic product to be obtained thanks to their powerful rotor structure and optimized impact plates. This feature ensures that the final product is superior in terms of both quality and granulometric homogeneity. Thanks to the hydraulic adjustment mechanism, adjustments can be made quickly and safely. In addition, there is minimal time loss during maintenance. The durable body structure, manganese-lined inner surfaces that provide protection against wear, and wide feed opening guarantee long-lasting use and high performance. With all these features, primary impact crushers increase production capacity by reducing the need for secondary crushing in plants and lower operating costs. Primary Impact Crusher Technical Specifications MODEL: CPI – 1412 Rotor Diameter: 1,400 x 1,250 mm Maximum Feed Size: 900 x 900 mm Laedpfoxqgypsx Akwoh Production Capacity: 200 – 250 t/h Motor Power: 250 kW Weight: 23,000 kg MODEL: CPI – 1415 Rotor Diameter: 1,400 x 1,540 mm Maximum Feed Size: 1,000 x 1,000 mm Production Capacity: 350 – 400 t/h Motor Power: 315 kW Weight: 28,000 kg MODEL: CPI – 1620 Rotor Diameter: 1,600 x 2,000 mm Maximum Feed Size: 1,300 x 1,300 mm Production Capacity: 400 – 600 t/h Motor Power: 2 x 250 kW Weight: 52,000 kg Why Choose CONSTMACH Primary Impact Crushers? CONSTMACH has proven its reliability with crushing and screening equipment manufactured to high engineering standards. Our Primary Impact Crusher models are designed for different capacity and application needs. Each one undergoes tested quality control processes and offers long-lasting use. In addition, thanks to our after-sales technical support, spare parts supply, and fast service advantages, you will get a return on your investment for many years to come. If you are looking for high performance, durability, and low maintenance costs, the CONSTMACH rock crushing machine series is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 1991, Allis Chalmer 60 109 M-II Primary Gyratory Crusher Lsdpfxjvg A Rao Akwoah 2 complete units, intake size: 1,500 mm (60 inches), cone diameter: 2,725 mm (109 inches), output size: 175 to 250 mm (7 to 10 inches), throughput: approx. 4,700 to 6,400 t/h, without electric motor (required drive power: 750 kW), including one hydraulic hammer each, total weight: approx. 570 t per unit

Condition: used, Year of construction: 2013, overall weight: 1,111 kg, load capacity: 240 kg, arm reach: 2,700 mm, controller model: KRC4, Equipment: documentation/manual, For sale is a KUKA KR 240 R2700 prime industrial robot in good, used condition. The robot comes from an industrial setting and is fully functional. Before delivery, the robot will be thoroughly tested again to ensure its perfect operation. This guarantees that you will receive an immediately ready-to-use and reliable solution for your automation tasks. An inspection while the robot is powered on is possible at any time. Scope of delivery: Lasdpfsuvgrpjx Akwsh - Mechanics (manipulator) - Control cabinet / controller - Operating panel (teach pendant) - Connection cable

Condition: ready for operation (used), Year of construction: 2019, total height: 4,125 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, overall weight: 5,530 kg, table load: 4,500 kg, number of axes: 3, This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Additional equipment • 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) • Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller • Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) • Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters • FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system • Ø 30 mm reference sphere • INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) • Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer Machine Benefits Qualitative Machine Benefits • Condition: new, factory-sealed, immediate availability Technical Machine Benefits Ledpfsyaacqjx Akwjah • Accuracy (iso 10360, typical with sp25m): mpee 3. 0 + l/300 µm | mpep 3. 0 µm | mpe_thp 4. 4 µm / 68 s • Dynamics: up to 519 mm/s | 1,732 mm/s² • Probing/scanning: renishaw ph10m + sp25m (sm25-1…-5), fcr25/fcr25-tc (temperature-controlled) • Software: inca3d premium (iges/step, scan options) • Operating conditions: 20 °c ±2 °c; temperature gradients ≤ 1 °c/h and ≤ 1 °c/m • Pneumatics: 6 bar, dry and oil/particle-free • Power (controller): 90–240 v, 50/60 hz, 16 a; approx. 600 va (psu up to 2,000 va) Dimensions Machine Depth 2505 mm

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you Lajdpfxeyaluro Akwjh

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new Ljdovivmyepfx Akwsah >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.