Used Relieving Lathe for sale (5,664)

Condition: good (used), Year of construction: 2012, Max cutting diameter 584mm, 845mm swing, 165mm bar capacity, 2,000rpm spindle 24 station turret, Nsdpfx Ageyu N Tzswocp 30kW motor power, 3 jaw chuck, Mazatrol Matrix Nexus control, tool setter, tailstock, swarf conveyor, fixed steady

Condition: used, functionality: fully functional, Herbert 9C-30 Turret Lathe Type of chuck: 4 jaw Ncjdpfx Aeyudgvjgwsp Diameter over bed (Max): 762mm Diameter over cross slide (Max): 535mm Diameter in front of cross slide (max) : 737mm Length between chuck face & turret face (Max): 1505mm Travel of turret: 1066mm Diameter of hole through spindle: 125mm

Condition: good (used), Year of construction: 2014, Swing over bed 660mm, maximum machining diameter 380mm, maximum machining length 510mm, bar capacity 80mm, spindle speed 4,000rpm, 12 station turret, Mazatrol Smart control, swarf conveyor, & 3 jaw chuck Ncsdpfx Agjyt H Ruewsp

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, XYZ CT 65LTY (Live Tooling & Y Axis) Siemens 828D Control Manufactured & Installed in 2022 Hydrafeed Multifeed Short Magazine Bar Feed Bar Support Unit VDI Live Tooling Holders Supplied Swarf Bin Supplied Machine Stroke: Max’ Swing 400mm Max’ Turned Dia’ 220mm Max’ Turned Length 490mm X Axis Travel 220mm Y Axis Travel 70mm (+/-35mm) Z Axis Travel 500mm Spindle: Spindle Nose A2-6 Spindle Bore (Drawtube Capacity) 65mm Spindle Speeds to 4,000rev/min Spinlde Motor 17kW Feeds: Rapids 20m/min Cutting 10m/min Slideway Type Hardened Boxways Ncjdpfx Agoyvqfpowop Turret: Turning Tool Shank 20 x 20mm Turret Type VDI 30 Power Turret No. Of Stations 12 Live Tool Max 4500rev/min Max’ Borning Bar Dia Ø32mm General: Tailstock MT4 Quill Dia’ 75mm Coolant Tank Capacity 80l Coolant Pump Delivery 30L/min Machine weight 4.4ton Footprint 3,300 x 2,270, 2,270mm/min Power Requirements 45amp Supplied with: Hydraulic 200mm 3 Jaw Power Chuck Hainbuch Collet Chuck & Collets Sauter ‘German’ VDI Turret Parts Catcher Through Tool & Flood Coolant Remote Electronic Handwheels USB Ports Networking Renishaw Automatic Tool Setting Arm Swarf Conveyor & Bin Programmable Hydraulic Tailstock For Sale Jet Machinery Ltd Jet Machinery Stock No: #79163 Machine Serial Number: STP20155 Cost: £72,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Ncjdpfxeyvqdfs Agwep Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2002, Tacchi HD-1450 CNC 725 x 4000 Heavy Duty Centre Lathe (2002) with Siemens Sinumerik 828D, 1000mm Diameter 4 Jaw Double Chuck, Chuck Bore Diameter 515mm, Barrufaldi Ban 400/4 4 Way indexing Tool Post (2) x 3 Point Steadies, Tailstock, Swarf Conveyor, Centre Height 725mm, Max Swing 1450mm Distance between Centres 4000mm, Main Motor 60kw, Max Workpiece Weight 15,000kg. Country of Origin: Italy Ncsdpfx Ajx T Ddaegwop Location: This lot is located in Aberdeen, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Dean Smith & Grace Type 13 - 1SB Lathe, Overhead Guards, Swivel Toolpost Turrret, 30" Travel, 6" Swing Over Bed, 6 DI Camlok (No Chuck), Spindle Speeds 16.8 - 750rpm (High & Low), Screw Cutting Chart. S/No. 31613 1 - 58 Nodpfxjyuwbte Agwecp Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Colchester CNC 500 Lathe. S/No. M501599 Ncodpfxoyuv H Uj Agwep Location: This lot is located in Burton-on-Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2018, Tornos CT20-5 Sliding-Head CNC Lathe. S/No. 2470010007 (2018) Country of Origin: Switzerland with Fanuc Series Oi-TD Control, Robobar SBF 326-3.2m Bar Feed, Kraft & Bauer Fire Suppression System, LNS Turbo HB Swarf Conveyor. S/No. 1757000525 (2014) Country of Origin: China, SEI CMC 400J-S2 Oil Filtration Unit. Country of Origin: Italy, Non-Guide Bush Conversion Kit, 4893 Hours Ncodpfx Aoyucmnogwsp Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice

Condition: used, Year of construction: 2006, turning length: 205 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, turning diameter: 20 mm, overall weight: 3,500 kg, total width: 1,150 mm, total length: 6,850 mm, total height: 1,765 mm, Equipment: documentation/manual, CNC Swiss Type Automatic Lathe CNC Control Star NICS (Yaskawa-Siemens 840DI) Turning diameter 20 mm Turning length 205 mm Spindle bore diameter 20 mm Spindle speed 500-10.000 R/min Spindle motor 3,7/2,2 kW Min indexing C-axis main spindle 0,001 ° Min indexing C-axis sub spindle 0,001 ° Ncjdpoywur Nofx Agwjp Number of tools on turret 16x Spindle speed driven tools 8.000 R/min Bar feeder FMB Turbo 3-26 (3200) LxWxH 6850x1150x1765 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 400 mm, spindle bore: 52 mm, turning diameter over top slide: 250 mm, turning length: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 30 rpm, Distance between centers: 1500 mm Swing over bed: Ø 400 mm Swing over cross-slide: Ø 250 mm Spindle bore: Ø 52 mm Speeds: 30 – 1800 rpm Ncodpfeyw Imgex Agwop Supplied with: Tool post holders 3-axis DRO Cooling unit Country of origin: Taiwan Motor power: 3.7 kW Machine weight: 1600 kg Machine (L×W×H): 290 x 120 x 155 cm

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox Ncodpfx Agjxrf Stswjp • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE Ncjdpfx Aoymmqbogwop MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS HYDRAULIC STEADY FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Year of construction: 2007, condition: good (used), Make: Okuma Nsdpfxsku Aaao Agwjcp Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Make: Keilinghaus Type: PLS 1500 HY Specifications Metric US Standard Max. blank / workpiece over bed 3000 Max. blank / workpiece in the gap 5000 Ø Centre height over bed 1500 mm Distance between centers 2600 mm Maximum sheet thickness 15 mm Stroke X-Axis 1000 mm Stroke Y-Axis 2800 mm Speedrange 240 Rpm Power Ncodpekvnnksfx Agwop 75 kW Spindle taper head stock DIN 55027 - Size 15 DIN / Camlock Stroke pinole quill 1200 mm Dimensions (Estimate) Length 10000 mm Width 8000 mm Height 4500 mm Weight 60000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Njdexrg S Iopfx Agwscp Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: used, Year of construction: 1966, total length: 1,700 mm, total width: 900 mm, total height: 1,300 mm, Empty weight: 1.000 kg - Year: 1966 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 180 - Swing over bed [mm]: 350 - Carriage turning diameter [mm]: 200 - Distance between centres [mm]: 500 - Bed width [mm]: 190 - Spindle bore [mm]: 30 - Transport dimensions: 1700mm x 900mm x 1300mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Ncodpfx Ajywt U Nsgwjp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2008, turning length: 1,609 mm, spindle bore: 110 mm, travel distance X-axis: 335 mm, travel distance Z-axis: 1,609 mm, spindle motor power: 26,000 W, rotational speed (max.): 2,100 rpm, total height: 2,100 mm, total length: 3,800 mm, total width: 2,100 mm, CNC Lathe with c-axis VIPER - VT-33LMBC MACH-ID 9473 Make: VIPER Type: VT-33LMBC Control: Fanuc 21iTB Year: 2008 Tooling holders included Live driven Axiaal tools included  Live driven Radial tools included Chip conveyor Tool eye arm Motorized Tailstock 3 chuck 400 mm with extra2008 jaws Max. turning Ø: 780mm X-Axis: 335mm Z-Axis: 1609mm Spindle bore: 110mm Speedrange: 2100Rpm Spindle power: 26kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:4.5kW Chip conveyor: yes Tool eye: yes Pinole taper: 5Mk Stroke pinole: 110mm Quill Ø: 100mm Length: 3800mm Ncsdpfxeyw Ii Uj Agwsp Width: 2100mm Height: 2100mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, Swing over bed 660mm, maximum machining diameter 350mm, Nodpfx Asyna Ngjgwecp maximum machining length 540mm, bar capacity 65mm, spindle speed 5,000rpm, 12 station turret, Mazatrol Smart control, swarf conveyor, & 3 jaw chuck.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, turning length: 1,330 mm, turning diameter: 393 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, quill stroke: 80 mm, turning diameter over top slide: 400 mm, spindle nose: A2-8, Doosan Puma CT250 CNC Lathe Model: CT250 Year: 2003 Control: FANUC 21It ‘X’ axis Travel: 240mm ‘Z’ axis Travel: 680mm Chuck Dia: 10” (250mm) Swing over Bed: 570mm Swing over Saddle: 400mm Max. Turning Saddle: 255mm dia. Njdpfeyli R Uox Agwjcp Distance Between Centres: 700mm Spindle Speeds: 35 - 3500 RPM Machine with: Tool Pre setter Swarf Conveyor

Condition: excellent (used), Year of construction: 2018, turning length: 565 mm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 1,824 mm, total length: 2,800 mm, total width: 1,790 mm, CNC Lathe with c-axis Okuma - LB3000EX-II MACH-ID 9471 Make: Okuma Type: LB3000EX-II Control: OSP-P300LA Year: 2018 Tooling package with Tool Holders Axial driven live tools holders Radial driven live tools holders Kitagawa B210 3 Power Chuck Max. turning Ø: 580mm X-Axis: 260mm Ncsdpfxeywurpo Agwop Z-Axis: 565mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 4566H Pinole taper: 5Mk Length: 2800mm Width: 1790mm Height: 1824mm Weight: 4350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical details: Njdpjvgmimsfx Agwjcp turning diameter: 626 mm turning length: 3000 mm Turning diameter: 600 mm spindle bore: 100 mm spindle turning speed range: 2800 U/min weight of the machine ca.: 18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device *

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW spindle turning speed range: 5000 U/min speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min diverse toolholders: VDI 40 rapid traverse Z-axis: 45 m/min weight of the machine ca.: 6,5 t Nodjvgb Epopfx Agwjcp dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher *

Condition: excellent (used), Year of construction: 2013, CNC Lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of manufacture: 2013 Internal machine no.: 18 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: VDI 40 Nedpfoylh Sdox Agwecp Equipment: Chip conveyor Touchsetter OneTouch IGF NC tailstock 3-jaw power chuck Forkardt 3QLC/K250

Condition: excellent (used), Year of construction: 2007, CNC Lathe Okuma LB 3000 EX -M C1000 Control: OSP-P200 Ncsdpfx Ageyk Sgpjwep Year of manufacture: 2007 Internal machine no.: 17 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Bar capacity: 80 mm Direct mount: BMT 60 Equipment: - One Touch IGF - Chip conveyor - Touch setter - 3-jaw chuck (SMW 315 HB), capacity 85 mm - NC tailstock - Multi-language control - Coolant pump 8 bar