Used Recycling Electrocables for sale (2,372)

Condition: good (used), Year of construction: 2001, operating hours: 20,900 h, functionality: fully functional, Channel baling press Paal Konti 275 D, year of manufacture 2001, with shredder and chain belt conveyor Paal KEM-1500, year of manufacture 2005 Technical data: Manufacturer Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20,900 as of 10/2026 Gusds Afwy Hspfx Acmei Pressing force 75 t Total connected load 106 kW Feed opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveyor speed: 0.29 m/s Nominal width 1500 mm Axle distance 17500 mm Length of feed belt: approx. 10000 mm Length of rising section: approx. 9000 mm Gooseneck: approx. 1000 mm Inclination angle: 28° Materials: Paper, cardboard, light waste, plastic waste Note: The press is currently still in operation. Dismantling is planned for December 2026. An inspection under operating conditions is possible. The complete documentation including the CE declaration is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale is reserved and the offer can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without any guarantee or warranty.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Gusdpfx Ajxl Tnpocmji

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 90 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 720 mm, bale height: 1,100 mm, bale weight: 600 kg, overall weight: 32,000 kg, pressure: 300 bar, power: 110 kW (149.56 HP), BOA baler with double pre-press flaps available in fully refurbished condition. The machine is located at our workshop in Almelo and can be inspected by appointment. If required, a matching (new) conveyor belt can be produced. The machine is perfectly suited for baling various materials such as cardboard, paper, plastics, car tires, and RDF. The machine is equipped with a so-called refu-ram. This is ideal for baling materials such as plastic bottles and/or shredded RDF. Technical specifications: Drive: 2x 55 kW Pressing force: 90 tons Gujdpfx Acjxbc U Demoi Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tying wires: 5 vertical

Condition: new, M&S Gruseck GmbH Gujdpfsxnyl Tjx Acmoi NEW screening drums from the market leader - 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM518 Square staggered perforation (QV) 30mm Sheet thickness = 8mm !!! Over 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Always tested! True running in operation! - Best price-performance ratio! - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations available (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! - Various sheet thicknesses! - Different materials available (at least S355)! - Special customer requests are not a problem for us – they're our specialty! - All drums are painted! - Large stock selection! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM620 Square staggered perforation (QV) 12mm Sheet thickness = 6mm --- Over 500 manufactured screening drums per year speak for themselves --- - Premium quality! - Individually tested! Perfect concentricity during operation! Gjdsxnyp Ejpfx Acmoui - Excellent value for money - Short delivery times! - Punched perforations for optimal screening results! - Various perforations available (square, round, honeycomb, etc.)! - Narrow web spacing for maximum screening surface! - Various sheet thicknesses! - Various materials available (at least S355)! - Special customer requirements are not a problem for us—they are our specialty! - All drums are painted! - Large selection in stock! - Compatible with all common screening machines!

Condition: new, M&S Gruseck GmbH NEW drum screens from the market leader – 100% MADE IN GERMANY! Drum screen suitable for a Doppstadt SM620 Staggered square perforation (QV) 30mm Sheet thickness = 8mm !!! Over 500 drum screens manufactured annually speak for themselves !!! - Premium quality! - Consistently tested! True running operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation patterns (square, round, honeycomb, etc.)! - Small bridges for optimal screening surface! - Different sheet thicknesses! - Various materials available (at least S355)! - Special customer requirements are not a problem for us—they’re our specialty! - All drums are painted! - Large selection in stock! Gedpfx Asxnywpecmeui - For all common screening machines!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to enhance their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 hours of service! Lot contents: Guedpfx Acsxtfa Homji • 10 OSR units (Knapp shuttles) – shuttles for automatic storage and handling • 2 lifts (for connecting levels) • Infeed and outfeed conveyors included (for easy integration into the existing flow) • 2,200 SILVERLINE plastic containers, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! No control system service or installation (software) provided. Advantages: • High automated storage capacity (2,200 containers) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate flow integration Price: €340,000.00 excluding VAT (complete lot). ⚠️ Important: ISC Recycle only handles the sale of the equipment. Integration available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, RSS 2-shaft shredder, 800 series, 2 x 7.5 kW Rotor length: 800 Blade thickness: 20 mm The machine can be customized to your specifications, including the control panel. Delivery time upon consultation. Infeed and outfeed conveyor belts are available as an option. This shredder is ideally suited for destroying, for example, hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. Upon consultation, we can also deliver and install the machines. Guodpfx Acew Ry Alemoi Please provide your name, company name, and a valid telephone number so we can respond quickly.

Condition: refurbished (used), “SKET EMT 500/1280 SF-R” for Sale Gujdjw R N Uqspfx Acmoi Manufacturer: SKET Type: EMT 500 / 1280 SF-R L x Dia.: 1.350 x 500mm Voltage: 110 V Amperage: 17 A Power: 1,9 kW

Condition: used, Erlab Captair Filtair 936 Filter Fume Hood The ductless, filtering chemical fume hoods from Erlab offer the most powerful filtration worldwide and guarantee safety and performance. A system with countless advantages that provides comprehensive protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance parameters of the fume hood and ensures your safety at all times. Advantages Perfect user protection Filtration safety: All models of the captair@ filtair filter fume hood comply with the AFNOR NFX 15-21 Class II standard. Retention of chemical vapor pollutants in the work area, guaranteed by controlling the air velocity at the front and complying with the standards for pollutant retention (XPX 15203, BS 7258, DIN 12927). Sampling valve for the exhausted air enables the user to monitor the filter saturation at any time using color reaction tubes (not included). The front and door made of acrylic protect against any chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Sloped front for a better view of the work process. Well-designed openings for the hands provide the user with plenty of freedom of movement in the work area. Stuffing boxes for inserting electrical or power cables into the work area. Work position adapted to the user. Very low noise level (49 dBA). Transparent walls for a good overview of the work processes in the work area. Easy installation / Energy saving No exhaust duct required; a power outlet is sufficient. Direct installation in your laboratory or on an optional Guodpfeyk Dq Hjx Acmsi mobicap" rolling table. Energy saving, through the recycling of the purified air from the unit without consuming heated or cooled air. Erlab/Captair Filter Fume Hood Filtair 936. Connection values: 230 V. 50 Hz. 94 W Safety class 2 Air flow m³/h: 200 m³/h Air inlet velocity front m/s: 0.51 Filtration type S Filter 960-961. Safety class 3 Class for pollutant retention B 2 fans Analog flow meter Noise level approx. 51 dB(A) External dimensions: 110x84x74 cm Internal dimensions: 87x82x73 cm Volume of the work area m³: 0.432 Two handles in the front window Available filters: MF and VF CE marking. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Gusdpfx Acjyk Ea Asmoi

Year of construction: 2024, condition: new, Overview - of the various variants *not every item is required: Optional: - Bale opener MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction auger - length approx. 4 m Four sieves are mounted on the underside, which are vacuumed. Individual price net from: €9,750 - Suction parts / hoses as a package €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator dust extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³ /400 V Gsdpfeff Sbiex Acmjui Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with +/- 20 kg from €67,550 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Performance: approx. 30 bales per hour Hopper capacity approx. 0.7m³ Level sensors for min./max. fill level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek balers / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded Miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The baler compresses the material fed into the hopper without the addition of binding agents by means of hydraulic pressure and packages the material in plastic sacks. The volume of the material can be significantly reduced with the baler. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry matter. The hopper of the mütek baler can be loaded automatically or by hand and has a volume of approx. 0.7 m³. Containers with a larger volume or with an integrated extraction and filter system as a complete disposal unit are also available. In addition to the automatic filling via dust extractor, mütek also offers filling by means of conveyor screws. In both variants, automatic dust extraction is possible. mütek balers are equipped with a control cabinet for operation. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry matter) - maximum 35 mm long

Condition: new, +++++ We manufacture the original +++++ Non-binding offer Copper cable recycling machine Gedpfx Aeflkz Hocmjui 1 unit GA 37-450 granulator cutting unit - completely assembled - incl. motor (37 kW) - with inlet hopper, outlet hopper, and belt guard - 1 set of knives (5 rotor knives and 2 stator knives) - 1 screen - Mounting, system integration into your plant - ex works Our general terms and conditions apply.

Condition: new, length 1900 mm width 810 mm Gjdpfx Acjhx Halomeui height 860 mm internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets.

Condition: used, Hermle Z 200 A Centrifuge – Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A can accommodate up to 12 x 15 ml tubes with conical and round bottoms. Specifications: Capacity: max. 12 x 15 ml / 6 x 50 ml Speed: max. speed/RCF: 6000 rpm / 4185 xg min. speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: button-controlled in 250 rpm increments Speed display: preset and actual speed – digital Run time: max. time: 30 min. / continuous operation min. time: 0.5 min. Preset: 0.5 - 30 min. / “Hold” Time setting: 0.5 min. increments via button press Time display: remaining time – digital Brake: fixed braking force with soft stop Features: - Microprocessor-controlled - DC motor, covered - ABS plastic housing, impact-resistant and chemical-resistant Safety: - Lid locking system - Automatic imbalance detection with safety shut-off - Manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inches): Width: 28 / 11.0 Height: 26 / 10.2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition Gjdpfxem Albds Acmsui You can find more centrifuges – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, Disc cutter for the efficient shredding of rejected rolls. Features: -Automatic safety locking system -Blade guard Godpfjn Hyxlex Acmjui -Emergency stop pull cord -Siemens PLC Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7.5kW Cutting force: 30 tons Machine in stock, immediately available. Price and further information upon request. We will gladly provide you with a non-binding offer.

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Gujdpfxen I Rgpe Acmei Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Gedjdv Eu Hepfx Acmeui Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 850 mm - Machine weight: approx. 3500 kg Gedpfxogl Adzo Acmoui - Tank capacity: approx. 110 liters - Hand protection grid in the area of the control panel and on the opposite side - Knife locking mechanism - Straight splitting table design - Documentation: 2 copies in German (1 printed, 1 on CD) - Color: RAL 5012 - light blue - Protective grid/knife beam: RAL 1028 - melon yellow Machine in stock and immediately available Price and further information upon request.

Condition: used, Year of construction: 2005, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Guodpfjzgvhhsx Acmji Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Drive: electro-hydraulic, electric motor 200 kW, Guedpozv U Ifofx Acmoi Hydraulic unit with control cabinet and operator panel, 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Discharge conveyor belt recently replaced.

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. Gedoz E Iy Rspfx Acmeui - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation - Excellent price-performance ratio - Optional winding station / automated cushion roll production - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: used, Year of construction: 2006, Doppstadt DW 3060 E Büffel – Electric Shredder We are offering the following used Doppstadt shredder for sale: Technical data and equipment: Manufacturer / Model: Doppstadt DW 3060 E Büffel Year of manufacture: 2006 Drive: Electric motor, 315 kW Roller configuration: 21 teeth Control cabinet Lower conveyor belt Side conveyor belt, 9m Remote control Feed hopper with extension Dismantling and loading: The machine will be dismantled and loaded. If you are interested, we will be happy to provide you with further information, photos, or arrange a viewing. Gusdpfx Acsz Ntcgemji

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0509, overall weight: 1,200 kg, number of blades: 28, rotor width: 630 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main engine power: 18.5 kW Rotor width: 630 mm Number of axles: 1 Number of rotating blades: 28 Screen perforation: 20 mm Hydraulic slide: Yes Opening width: 810 mm Opening length: 630 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,660 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT Gsdpfxez Nip Ae Acmoui Hydraulic slide CE marking

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Interfaces: Gjdpoz Nkt Nsfx Acmjui Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve These are two silos – the package price is 15% lower than the stated individual price of a single silo.