Used Radial Drilling Machines for sale (66,780)

Condition: used, Clamping cube for radial drilling machine Dsdpfxezinz Se Ab Aekw Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition

Condition: good (used), Year of construction: 2016, machine/vehicle number: 160409, Offer 26217 Technical specifications: - Drilling capacity in full steel ST 60: 40 mm - Thread cutting ST 60: M 30 - Drill spindle connection: MK 4 - Quill stroke: 200 mm - Drill spindle speeds, stepless: 50 - 2000 rpm - Drilling feed rates: 0.08 - 0.50 mm/rev - Height adjustment of the drill column: 380 mm - Overhang: 950 mm - Travel of the upper slide: 590 mm - Table size: 1200 x 500 mm - Drive: 400 V / 4.5 kW - Space required (approx.): W 1200 x H 2400 x D 1700 mm - Weight (approx.): 2700 kg - Includes: - Thread cutting device - Hydraulic column and arm clamping Dkedpez Arniefx Ab Ajw - Coolant system - T-slots, vertical, on the left side of the machine - Various accessories

Condition: good (used), Year of construction: 1983, functionality: fully functional, Caser F50 radial drilling machine with quick-change chuck MK3. Dsdoyrytyjpfx Ab Askw

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Djdpfx Abozhualo Askw Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2226-3, Offer 26331 Technical data: - Drilling capacity in full steel ST 60: 23 mm - Drilling capacity in GG 25: 30 mm - Thread cutting in ST 60: M 20 - Thread cutting in GG 25: M 26 - Drill spindle connection: MK 3 - Quill stroke: 135 mm - 12 drill spindle speeds: 70 - 1550 rpm - Drilling feed: 0.075 - 0.30 mm - Min./max. distance spindle – table: 220 / 670 mm - Drilling radius min./max.: 305 / 920 mm - Table size: 1060 x 600 mm - Drive: 400 V / 1.1 - 1.6 kW - Space requirement approx.: W 1200 x H 2500 x D 2300 mm - Weight approx.: 1380 kg Dodpfs Agtagjx Ab Aokw - Includes: - Thread cutting device - Hydraulic column and boom clamping - T-slot clamping plate, vertical, on the left side of the machine

Condition: used, RADIAL CSEPEL TYPE: RF50/1600 Dksdpfxsriu Eye Ab Asw TYPE: RF50/1250 20 AVAILABLE PIECES

Condition: good (used), Year of construction: 1968, machine/vehicle number: 68113, Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity, enlarging holes approx. 80 mm - Thread cutting up to approx. M 40 - Drill spindle mount MK 5 - Drill spindle stroke 380 mm - Overhang min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the arm approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Work area on base plate approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feed rates 0.09 - 0.75 m/rev - Drill spindle drive 400 V / 10 kW - E - central clamping system - Coolant system - Space required approx. W 1400 x H 3400 x D 3600 mm Dkedpfjzii Sfjx Ab Asw - Weight approx. 7500 kg

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping Djdpfx Aszwftzsb Ajkw - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: ready for operation (used), Year of construction: 1984, total width: 1,600 mm, overall weight: 5,500 kg, arm 1600 mm; drilling capacity 55 mm; hydraulic clamping; stroke 6000 mm; weight 5500 kg. Dksdjy Dqy Nepfx Ab Aow

Condition: good (used), Year of construction: 1983, Stock number: 3005 Manufacturer: HKS Singen Year of manufacture: 1983 Machine number: 401044 Model: HKS 40 Drilling capacity: 40 mm Spindle taper: MK 4 Speed range: 26 to 1,940 rpm Feed: 0.05 to 0.45 mm/rev Table: 1,520 x 740 mm Dedpfx Abswu Ilwj Askw Clamping surface: 1,370 x 610 mm Outreach min/max: 400 / 1,120 mm Stroke: 200 mm Swiveling range: 360° Vertical adjustment of arm: mm Horizontal adjustment of arm: 720 mm Accessories: Connection: 6.5 kW Footprint: 1,500 x 1,100 mm 2nd plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Djdpfxjtwzk Dj Ab Ajkw Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1996, Radial drilling machine, MAS Kovosvit V0 80, serial number 151321248, manufactured in 1996, weight approximately 12,000 kg, overhang approximately 200 cm, with a large clamping cube. Dsdpfx Aez Ib Uyeb Askw

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Dedpfx Absikvcas Askw Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 32 mm arm length ca. 920 mm Dodpfx Ajztf Aueb Ajkw

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Dkedpfxjzgvmqj Ab Asw Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: used, Kolb radial drilling machine ready for loading onto a truck Dkjdpfx Aboz Eanae Asw Technical specifications will be available shortly.

Condition: used, Year of construction: 1980, taper MK 3 feed: 4 Stufen 2580 x-travel 2500 mm throat 1000 mm 1000/2800 mm Dkedpfozfqmpsx Ab Asw weight 3,7 t

Condition: good (used), Breda radial drilling machine Type R 1220 MP 400 Volt, 3 kW Dksdjx Rt Ezspfx Ab Asw Spindle taper MK 5 Arm length 1250 mm Speed 30–1200 rpm with swiveling table

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm Dodpjtzctmsfx Ab Ajkw max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Dkodpfx Ajuigzpeb Aow Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: good (used), Year of construction: 2010, functionality: fully functional, Used, well-maintained V-TRADE quick-change drill press, model: ZX3840. Drilling capacity in steel: 40mm. Thread cutting up to M30. Spindle taper: MK4. Spindle speed range, steplessly adjustable via two gear stages: 50-315/315-2000 rpm. 8 automatic feeds: 0.08-0.5mm/rev. Spindle extension. Quick-change chuck: RÖHM. Machine vise. Halogen lamp. Machine feet. Dkodpfsz Tdkvox Ab Aew Technical data and dimensions: Subject to change.

Condition: good (used), 1 used quick-change radial drilling machine Manufacturer: Donau Type: DR 28 Z Year of manufacture: 1985 Technical data: - Drilling capacity in full steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in steel ST 60: M 30 - Thread cutting in cast iron GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 drill spindle speeds: 45 - 2240 rpm - 4 drilling feed rates: 0.1 - 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Including: - Thread cutting device - Hydraulic column and boom clamping - Coolant system Dodpfx Aozl Ufcsb Ajkw - T-slots, vertical, on the left side of the machine

Condition: used, Year of construction: 1980, functionality: fully functional, functions perfectly The machine weighs approximately 4 tons. Dkedpfx Ajx Eigzsb Aew

Condition: good (used), Year of construction: 2009, bore capacity in steel (diameter) 40.0 mm thread cutting attachment M 30 spindle taper MT 4 MK table surface area 1200 x 500 mm turning speeds 50 - 2000 U/min arm length 1050 mm column diameter 220 mm spindle stroke - max. 200 mm feed range 0.08 - 0.50 mm/U distance spindle /table 760 mm weight 2740 kg range L-W-H 2450 x 2450 x 2800 mm Original price approx. 20.000 Euros Special price on request Equipment: - Robust electro-hydraulic radial drilling machine - Sturdy construction ensures vibration-free operation - Compact design with electro-hydraulic quick-clamping system - Infinitely variable speed adjustment (50–316 + 316–2000 rpm) - Digital speed display - Motorized height adjustment of the drill head - Drill head swivels 180° Dedoz R D Icjpfx Ab Aekw - Arm movable forwards/backwards and swivels horizontally - Clockwise/counter-clockwise spindle rotation - Manual & automatic spindle feed - Large work table with 3 T-slots - 1x heavy-duty machine vice * STANKO IMPORT "200-0225C" * Jaw width: 250 mm * Jaw height: 60.0 mm * Opening width: approx. 300 mm - Thread-cutting attachment - Separate coolant system - Front-mounted emergency stop button - T-slots for mounting on the side and rear of the machine - Operating manual

Condition: excellent (used), functionality: fully functional, A very well-maintained radial drilling machine, manufactured by TAGO, type M 100, with a swiveling square table. Outreach: 1000 mm. Dedpezrzlcsfx Ab Aekw