Used Radial Boring Machine for sale (91,766)

Condition: used, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 475 mm, overall weight: 1,850 kg, table length: 1,100 mm, table width: 250 mm, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X750 Y280 Z475 mm. Table size: 1100 x 250 mm. Gkedpfx Aexpfy Eobbod Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5 HP. Digital readout: Heidenhain Positip 850 (X, Y & Z) Country of origin: Spain. Size (L x W x H): 1850 x 2100 x 2000 mm. Weight: 1850 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout, work ligth and 3-axis Heidenhain digital readout. All our machines are tested and serviced before delivery.

Condition: used, drilling capacity: 23 mm, High-speed radial drilling machine – Column drilling machine Donau Machine Tools DR23 Radial Drilling Machine Serial number: 2062-4 Operating voltage: 380 Volt, neutral conductor, 50 Hz, 3-phase Drilling capacity: up to approx. Ø 50 mm Speed range: 58 – 1275 rpm Tapping function, arm reach 920 mm Machine lamp Base plate/table size approx. 1100 x 400 mm Motor power approx. 1.5 kW, without coolant system 2 T-slots at the rear left Weight: approx. 1,200 kg Inspection under power possible by prior appointment. Gjdowybqqjpfx Abbokd All technical data subject to change/errors excepted. Price on request Sale exclusively to EU countries only.

Condition: good (used), Manufacturer: KOVOSVIT MAS Type: VO 50 / 1600 Year of construction: 1998 Specifications: Metric Metric US Standard Arm length 1600 mm Max. Drill Ø iron 60 mm Max. Tap diameter 42 M Quill stroke 310 mm Max. Distance spindle - table 1505 mm Min. distance spindle - table 320 mm Table / footprint 1470 x 986 mm Spindle speed 2500 rpm Tool holder 6 ISO/Bt/Mk Gkodpfer Dr T Ijx Abbed Quill Ø 55 mm Power output 4 kW Dimensions (estimate) length 2900 mm width 1200 mm height 3200 mm weight 4700 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: like new (used), Year of construction: 2005, Dowel and slot mortising machine GANNER GANNOMAT JUNIOR 323 Very good condition, the machine is absolutely like new. It comes from an educational institution that was closed approximately one year after the machine was purchased. The machine has a maximum of 10 operating hours. With this machine, you can mill slots and drill dowel holes on two levels without reclamping. 380V, 1500W 2800 rpm Year of manufacture: 2005 Gsdpfx Aboxqy Dnsbokd With this machine, you can mill slots for, for example, lock cases and similar parts, or produce all types of frame dowel joints—at right angles, butt joints, and mitre joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and stair manufacturing, and similar applications. Thanks to two-level drilling, stop grids, and the overall design, dowel joints can be produced extremely quickly, making the machine highly economical. Features: - 2 fold-out table extensions - Machine requires a compressed air connection (6 bar, very low air consumption) - Right-hand rotation - Very clean and precise milling and drilling - Supplied with 2 angle stops (one center stop and one side stop, which can be used on both sides) - Also includes an adjustable mitre stop - At the front of the working table, there is a 2000mm long stop rail with two flip stops each. The stop rail can be shortened or extended as required. - Workpiece clamping is carried out with 2 pneumatic clamping cylinders - Height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch is at the front of the machine, enabling fast repositioning and level changes - Heights of the individual drilling levels can be read on 2 mechanical counters, above which there are setting screws to adjust the drilling heights - With a precision 12mm indexing rail, featuring a center index and 12 indexes to the left and right - Can be quickly converted for slot mortising; the machine can then be used without indexing and with 2 adjustable stops left and right, giving a maximum working width of 420mm - Max. drilling height: 100mm - Max. drilling depth: 150mm (with stop and scale) - Max. workpiece height: 160mm Everything works perfectly. The machine will be delivered and demonstrated personally by us throughout Germany for €220, so there is no risk for you when buying. Delivery to Austria and the EU is also possible upon request. The machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle. Professional machine, not DIY store scrap. Ready for immediate operation. Includes 2-jaw drill chuck up to 20mm. Very sturdy and durable construction. Precision linear guides with play-free ball bearing bushes are in good condition and move smoothly.

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3360.75 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg Gkjdpfx Abjxcbhrebsd 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: like new (used), Year of construction: 1990, Drilling capacity in steel: 50mm Drilling capacity in cast iron: 63mm Spindle: MK4 Spindle Speeds: (12) 45-2000 RPM Drill head displacement: 350-1250mm Gkedpeg I I Ekofx Abbed Distance spindle base plate: 350-1420mm

Condition: used, Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 450 mm, overall weight: 2,300 kg, table length: 1,300 mm, table width: 280 mm, power: 3.7 kW (5.03 HP), Spindle taper: ISO 40 RPM.: 85-1300. Travel: X1000 Y315 Z450 mm. Table size: 1300 x 280 mm. Automatic feed: X & Y Rapid speed: X, Y & Z. Motor: 3,7 kW. Digital readout: Newall DP 700 (X, Y & Z). Year: 1987 Gkjdpsxpftfjfx Abbod Country of origin: Taiwan. Size (L x W x H): 1650 x 2100 x 2000 mm. Weight: 2300 kg. All our machines are tested and serviced before delivery.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, feed length W-axis: 1,000 mm, position of the milling head: 360, table load: 100,000 kg, rapid traverse X-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, table length: 4,500 mm, table width: 3,500 mm, quill diameter: 180 mm, workpiece weight (max.): 100,000 kg, Equipment: rotational speed infinitely variable, BORING MACHINE PAMA mod. SPEEDRAM 2000 Numerical control: Siemens Sinumerik 840D X-axis travel: 13,000 mm Y-axis travel: 5,000 mm Z-axis travel: 1,200 mm W-axis travel: 1,000 mm Total axial stroke (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse X, Z, W: 20,000 mm/min Rapid traverse Y: 15,000 mm/min Spindle: Boring spindle diameter: 180 mm Spindle ram dimensions: 400 x 440 mm Spindle speed (3 ranges): max 2,500 rpm Spindle power (S1): 91 kW Rated spindle torque (S1): 9,050 Nm Boring spindle taper: ISO 50 DIN 69871/2 AD-Type Big Plus Work tables: 2 pieces, each 30 m2 (total 60 m2) Load capacity: 15,000 kg/m2 Thickness: 300 mm T-slot dimensions: 28 H12 - DIN 650 T-slot pitch: 250 mm Rotary-travelling table TH 100: Table size: 3,500 x 4,500 mm Load capacity: 100 tons Longitudinal travel V-axis: 3,000 mm Feed/rapid speed V-axis: 10,000 mm/min Automatic right-angle head mod. TS 35 360: Taper: ISO 50 - DIN 69871/2 Spindle diameter: 128.57 mm Maximum spindle speed: 2,000 rpm Universal head TU 30 360 Facing head platform – UT 5-630 S Platform diameter: 630 mm Slide travel: 200 mm Max rotation speed: 250 rpm Slide feed speed: 1 to 400 mm/min Maximum facing diameter: 1,250 mm Chain-type tool magazine cu 130 r80 Supplied with: Gjdpfsxuq H Usx Abbjkd - Accessory magazine with 3+1 positions, enclosed fixed type - Wireless probe (Renishaw) - Adaptive technological control - Tool life and twin tool management USED MACHINE

Condition: good (used), Year of construction: 1995, functionality: fully functional, Approx. year of manufacture 1995 Gksdpfx Aoxwc A Tebbjd

Condition: excellent (used), machine/vehicle number: 5210529, Fully tooled up with loads of accessories and internal housing dial guage. Gkedpfx Aov Abitsbbod

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Maximum overhang (max. distance of spindle axis from the body) 1600 mm Minimum spindle speed 20 1/min Maximum spindle speed 2000 1/min Gkodpfx Ajttriwebbed

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm Gkjdpfx Abed Supgsbed no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: used, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 8 rpm, overall weight: 3,850 kg, Spindle taper: ISO 40 RPM.: 8-1200. Travel: X1500 Y700 Z500 mm. Table size: 2000 x 420 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Country of origin: France. Size (L x W x H): 2000 x 2200 x 1700 mm. Weight: 3850 kg. Gjdpfx Abjxn R U Sobokd Rapid speed, and automatic feed in X, Y & Z. With vice. All our machines are tested and serviced before delivery.

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Gkedpfsq Dlznex Abbod Misc. Accessories Marcels Maschinen AG

Condition: good (used), Year of construction: 1990, Used radial drilling machine from MAS Type VO 80 Gkodpfswa A Drex Abbod Drilling capacity 80 mm

Condition: used, Year of construction: 2016, CNC boring machine – BIESSE EKO 2.1, year of manufacture 2016 An excellent multifunctional machine for vertical and horizontal drilling and milling. Equipment: -14 vertical drills -8 horizontal drills -1 saw in the X direction -1 milling spindle, 5.5 kW -8 positions in the revolver for tools and aggregates Additional: Gksdsxfz Azepfx Abbjd Extra license for bSolid software Workpiece length measurement and shifting of drilling from the edge according to tolerance The machine is in good condition, everything works, regularly lubricated and maintained. Price without VAT.

Condition: used, Year of construction: 1979, functionality: fully functional, feed length X-axis: 850 mm, feed length Y-axis: 280 mm, feed length Z-axis: 355 mm, overall weight: 6,100 kg, For sale is a Fritz Heckert FW 315 X1/2 milling machine from 1979. The machine is fully operational and is being sold based on offers. Please submit your serious offer. Scrap prices or offers only slightly above scrap value will not be considered. Technical specifications: Year of manufacture: 1979 Rated voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Machine connected load: 8 kW Machine rated current: 19 A Incoming line fuse: 50 A X travel: 850 mm Y travel: 280 mm Z travel: 355 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Gedowv T I Topfx Abbekd Speed range: 28 - 1400 rpm Table clamping surface: 1070 x 270 mm Total weight: approx. 6.1 t (tons) Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are exclusive of VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, throat depth: 1,000 mm, total height: 2,360 mm, drilling capacity: 80 mm, total width: 900 mm, total length: 2,500 mm, spindle speed (max.): 1,750 rpm, spindle speed (min.): 26 rpm, spindle mount: MK 4, The machine is being sold due to lack of space Gsdpfexp Rd Ajx Abbjkd

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 35 rpm, overall weight: 2,600 kg, table length: 1,525 mm, table width: 325 mm, Spindle taper: ISO 50 RPM.: 35-1800 variable. Gkjdpfsxn R Tnex Abbsd Travel: X1050 Y330 Z475 mm. Table size: 1525 x 325 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5,5 kW. Digital readout: Fagor Innova (Z). Year: 2002 Country of origin: Spain. Size (L x W x H): 2400 x 2500 x 2200 mm. Weight: 2600 kg. Variable speed in 2 gears. All our machines are tested and serviced before delivery.

Year of construction: 2021, condition: as good as new (ex-display), Max. drilling diameter 50 mm Max. travel of spindle 315 mm Max. distance from spindle axis and column 1600 mm Min. distance from spindle axis and column 350 mm Max. distance from spindle nose to surface of base worktable 1220 mm Min. distance from spindle nose to surface of base worktable 320 mm Spindle taper MT 5# Spindle speed steps 16 step Spindle speed range 25~2000 r.p.m. Gsdpfxoh H Edij Abbskd Spindle feed steps 16 step Spindle feed range 0.04~3.2 mm/r Dimension of worktable 500x630 mm Arm length 2140 mm Power of main motor 4 Kw Machine dimension 2500x1060x2655 mm Net. Weight 3.50 Ton

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Gjdpfxow Nmw Ho Abbjkd Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2018, Radial Drilling Machine KNUTH R 40 V Gksdpfx Aoxdw Uksbbed Year of manufacture: 2018 Very little used Clamping cube Digital depth display Technical Data: WORKING AREA Drilling capacity: 40 mm Tapping capacity, cast iron: M 40 Tapping capacity, steel: M 32 Max. drilling depth: 260 mm Machine table dimensions: 2050 mm x 920 mm x 180 mm Cube table dimensions: 620 mm x 450 mm x 450 mm Arm reach: 300 mm - 1300 mm Distance spindle nose to table surface: 300 mm - 1200 mm Vertical arm travel: 640 mm Column diameter: 280 mm TRAVEL Horizontal travel of drilling head: 1000 mm MAIN SPINDLE Speed range: 54 rpm - 2150 rpm Spindle taper: 4 MT FEED Feeds: 0.1 mm/rev - 0.63 mm/rev DRIVE POWER Main drive motor power: 2.2 kW Lifting motor: 1.1 kW DIMENSIONS AND WEIGHT Dimensions (L x W x H): 2.07 m x 0.85 m x 2.43 m Weight: 2300 kg

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length 4250 mm Table width 4250 mm Table load 130.000 V-axis feed 3000 mm B-axis rotation Gkodetwllfjpfx Abbjd 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Gkedpfx Aew Iu Nhobbsd Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Gedpfew Upfdex Abbokd Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.