Used Punching And Cutting for sale (20,926)

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Equipment: Dodpfx Asvfxw Hodhscn cutting thickness 40 mm

Year of construction: 2002, condition: excellent (used), functionality: fully functional, BOGRAMA Punching Machine – Multi BSM 450/220/15 - Manufacturer: BOGRAMA AG, Switzerland - Type: BSM 450/220/15 - Year of Manufacture: 2002 - Machine No.: 038/02 - Working Width: max. 450 mm - Performance: up to approx. 12,500 cycles/hour (depending on material and format) - Punching/Cutting Thickness: - Hole perforation: up to approx. 2 mm - Binder hole: up to approx. 5 mm - Cutting: up to approx. 5 mm - Strip steel cutting: material-dependent - Sheet Alignment: pneumatic front and side guides - Cycle Control: via photocell - Compressed Air Connection: 6 bar - Electrical Connection: 3 × 400 V / N / PE, 50/60 Hz - Fuse: 32 A Dcjdpfx Aoz I Ug Asdhon - Applications: Punching, cutting, perforating, and hole punching

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Dcjdszg D I Ajpfx Adhsn NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C12302A210I-D, total length: 4,550 mm, total height: 2,500 mm, power of the servo motor: 35,000 W, overall weight: 6,000 kg, product height (max.): 2,500 mm, input voltage: 380 V, For sale: industrial automatic paper cutting machine YYS-I-1750, year 2023. Excellent condition, high-performance (51 kW), suitable for high-productivity paper roll processing. Includes an additional brand-new spare blade. Dcedpfxezik Dps Adhon The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Dcedew A H T Ajpfx Adhjn Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0165091297780, Offer 26265 Hydraulic flat bar and round bar shear with notching device and hole punch Technical data: - Flat bar shear, cuts up to 240 x 13 mm - Angle bar shear - Cuts L-shaped steel at 90° up to 100 x 10 mm - Cuts L-shaped steel at 45° up to 70 x 8 mm - Round bar shear - Cuts round steel up to 35 mm - Cuts square steel up to 32 mm - Notching device with square notching device - Hole punch - Punching force 600 kN - Reach 220 mm - Punches holes in steel up to 30 mm Ø in 15 mm - Punches holes in steel up to 24 mm Ø in 20 mm - Various punching tools and dies - Electrical equipment – foot pedal - Drive 400 V / 4 kW - Space requirement approx. W 540 x H 1800 x D 920 mm Dcjdpfx Adjz Ndxuehsn - Weight approx. 1200 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Dcedpfx Aoz D D N Ejdhon Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 370 kW (503.06 HP), fuel type: hybrid, color: other, Equipment: ABS, cabin, hydraulics, The CONSTMACH JCV-1 mobile crushing plant is a three-axle mobile system specifically designed for professional crushing and screening plants seeking high capacity and superior performance. The CV-1 provides maximum efficiency in crushing high-hardness rock types such as granite, basalt, dolomite, and similar materials. It is also an ideal solution for producing high volumes of fine material and achieving excellent cubic-shaped aggregate. The plant is based on sophisticated engineering, long-lasting components, and the durability that comes with CONSTMACH quality. The JCV-1 system consists of a combination of a mobile jaw crusher, a cone crusher, and a vertical shaft impact crusher (VSI) unit. This structure allows material to be obtained in five different fractions simultaneously. The PLC-controlled automation system is equipped with SIEMENS and SCHNEIDER brand electronic components, and the plant can be managed from a single tablet. Its modular and portable design makes it compliant with international road transport standards. The hydraulic foot system allows for easy installation and commissioning. Optional diesel generator options can also meet energy requirements on site. JCV-1 Mobile Crushing and Screening Plant Technical Specifications Dcodpjxqgwhofx Adhen Production Capacity: 60-80 tph Maximum Feed Size: 610 x 380 mm Main Configuration: Jaw Crusher + Cone Crusher + VSI + Vibrating Screen Total Motor Power: 370 kW Electric Generator Requirement: 750 kVA Plant Weight: 90 tons (total) Dimensions: 1. Chassis – 10 (L) x 3.1 (W) x 4.4 (H) m 2. Chassis – 17 (L) x 3.8 (W) x 4.4 (H) m 3. Chassis – 17 (L) x 3.8 (W) x 4.4 (H) m Chassis Type: Hydraulic folding legs, three wheeled chassis Why Choose the CV-1 Mobile Jaw Crusher? CONSTMACH CV-1 is an excellent choice for users seeking maximum efficiency and flexibility in mobile crushing plants. Its easy transportability, short setup time, and advanced automation technology save time and labor. While offering reliable performance for years with its high-quality components, its user-friendly design minimizes maintenance and operating costs. If you are looking for high-quality material production, durability, and engineering excellence, experience the CONSTMACH difference in the field with the CV-1 Mobile Jaw Crusher. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions Dcodpfxevv R H Us Adhsn 1650 X 1540 X 1650 mm

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface Djdpfx Adezz Hhnohocn – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Polar Mohr 137 XT Autotrim Paper Cutting Guillotine The machine is fully functional and in very good condition. Reviewed and ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 1370mm Stack height: 165mm Programmer with touchscreen display Autotrim – a split front table for removing trim Includes the original steel basket. Comb cutting adjustment from the machine’s control panel Air knife for blowing small debris off the knife Air table Photocells Chrome table surface Ball screw drive for the rear comb Servo-driven saddle control for very fast operation Optical cutting line Enlarged side tables Additional rear table guards Weight: 4500 kg 380V power supply Dcedpfx Ajzz Hhhsdhen Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm Dcsdeztn Itopfx Adhsn max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Dcjdezw Tzaepfx Adhen Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Dsdpezw Tyvsfx Adhjcn Enlarged side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable clamping force Additional rear table guards. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg Dsdpfszw T A Rsx Adhecn 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Dodpfxez Ebuze Adhecn Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Dsdpsz Ak Dijfx Adhocn Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Perfecta 92 Paper Cutting Guillotine The machine is in very good condition, serviced and ready to use. Dodpfxjzw Tx Ss Adhscn Technical Specifications: Cutting width: 920mm Stack height: 120mm Minimum scrap: 18mm Weight: 2300kg Power supply: 400V Equipment: – Brand new programmer and complete control system – New photocells – Air table – Hydraulic clamp with variable force adjustment – Side tables – Tool kit – Spare blade

Condition: good (used), Ideal 4705 Paper Cutting Guillotine This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, Dcedpfx Aozt H S Djdhjn – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Dcjdjzt H Tnspfx Adhjn Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Djdpozqc U Nsfx Adhjcn Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Year of construction: 2013, condition: excellent (used), functionality: fully functional, HIGHLIGHTS - camera system connected to a 19" screen for monitoring the cabin - interchangeable pallet table allows loading and unloading of the machine outside the working area - compact design - smoothing function for small holes and cut-outs for better cutting quality - complete databases for cutting technologies - CAM CONCEPT FINEST Professional software - Significantly lower maintenance costs compared to CO2 laser technology TECHNICAL DETAILS sheet size: 3000 x 1500 mm positioning speed up to 100m/min positioning accuracy +/- 0.03 mm laser source: 2,0 kW cutting capacity steel: max. 17 / 14 mm cutting capacity stainless steel: max. 10 / 5 mm cutting capacity aluminum: max. 8 / 6 mm Cutting power: max. 6 / 5 mm Cabin: with sliding door; complies with laser protection class 1 Control system: ECK-827 (based on Windows XP), multi-process control system Control connections: 2 LCD displays, 4 USB ports, LAN adapter Control functions: simple and intuitive software, diagnostics of machine operation, advanced functions such as scaling, rotation, mirror image of cutouts, database of cutouts, complete databases for cutting technologies Software: CAM CONCEPT FINEST Professional (automation/NC programs, many data interfaces, cutting optimization) Laser source: fiber laser source from the company IPG (Ytterbium Laser YLS 2000) Special features: Fiber optic conduction of the laser beam, low power consumption, low cost of cooling, life expectancy of the source up to approx. 100,000 hrs. Cutting head: PRECITEK Functions: Anti-collision system, error recording system, function of precise positioning, enables quick change of focal length. Dcodjl D Rp Tepfx Adhsn pallet table: 2 pieces Filter system: noise level

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Capacity to 50.000 bph. YOM 2015 EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. Dcsdpfx Adsytrdtshen HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Condition: good (used), Vandome and Hart IH500 pallet scale Djdpfsz E Nq Dsx Adhscn scale dimensions 1500mm x 1500mm, min weight 10Kgs to max weight 1500Kgs, e= 0.5Kw

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Dsdoz Nhx Aspfx Adhocn Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.