Used Protect for sale (11,770)

Condition: good (used), CEE plug -4-pin connector -16 A -Type: GHG 531 7406 V 0 -EX Protected -Weight: 0.5 kg Psdpfjb A Sf Iox Aa Eoha

Condition: new, welding current max. 200 A Psdpeg U Tccefx Aa Esha open-circuit voltage 14 - 24 V connected load frequency 230 V weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles

Condition: used, Protective hood / cover / flap for a planing machine Weinig type Unimat 23 SP or similar. length: 1.150 mm width: 1.550 mm height: 1.100 mm Phedpfx Aaewuub Ss Eja

Condition: good (used), Chip protection cabin - with safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition fully functional can be inspected and tried out on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Phsdeum Ri Hspfx Aa Eea Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: as good as new (ex-display), Semiconductor protection Psdpfx Aajmxi U Se Esha Make Klöckner Moeller Type DIL SM 16 V-k 400 Volt 16 A 7,5 kw unused from stock

Condition: used, current intensivity 140 A plate thickness 1,5 mm welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A weight of the machine ca. ca. 90 Kg Phsdpfx Aasxbtmds Eea dimensions of the machine ca. 0,4 x 0,8 x 0,8 m

Condition: good (used), Residual current circuit breaker (RCCB), motor protection switch, reversing switch -Type: multi-STOTZ F272/6 Phodpfx Aasb A R Hbs Eoa Price: per piece Quantity: 25 available -Weight: 0.5 kg

Condition: excellent (used), Handle UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface jet curing system, developed for curing light-curing adhesives with UVA rays and visible light. It is suitable for manual curing of individual parts during the production process as well as for laboratories. The following is integrated in the device a control unit with integrated mains switch and operating hours counter a lamp housing with the burner reflector ignitor. In with UV protection box Features: Contains 400 W metal halide lamps Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected service life of the UV lamp up to 1000 h The power supply unit can be detached from the lamp module and operated separately Adjustable lamp height for optimum irradiation Pedpfx Aastv H A Te Eeha With glass filter to avoid short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube miniature fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with base on both sides Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: used, length: approx. 435mm Phjdpfx Aaet T Hk Tj Eja width: about 210 mm height: approx. 160 mm Hole spacing: 120 mm Clearance height: approx. 85 mm

Condition: new, Year of construction: 2018, functionality: fully functional, Fire doors – Each door is new, unused, and high-quality, opened only for photographing. 2 pieces of fire protection doors by Teckentrup Door Solutions (distributed by KAMO Kran und Toranlagen). Protective doors, steel doors, manufactured by Teckentrup, model T30 FSA 62 (interior single-leaf fire doors). - DIN right, 1000 x 2000 mm, primed in RAL 9002 grey white, 1 mm galvanized steel. Phodpfshf I Ewsx Aa Esa - The doors have never been installed. - 1 wrap-around frame (for masonry, 265 mm) with GEZE guide rail - 1 overhead door closer, magnetic contact and bolt contact for status monitoring, - Panic lockset, lever handle set, one door additionally equipped with an integrated electric door opener. - Fire-retardant. Door leaf thickness: 62 mm. Unused and like new for sale. An excellent opportunity for optimal fire protection in interior areas. Price on request. Sale only to countries within the European Union.

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Phsdpfx Aajh S H Rrs Eea Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: Schneider Electric, Motor protection switch with rotary actuator Phjdjx Hfw Uopfx Aa Eja -Type: GV2-PM10 C / 4-6.3 A -Number: 5x switches available -Price: per piece -Dimensions: 80/45/H90 mm -Weight: 0.3 kg/pc.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Podpfx Aajihb Amj Ejha Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: good (used), Motor protection switch, star-delta switch, reversing switch -Type: Mehb -Adjustment range in amperes: 1.3 - 2.0 Phjdpfx Aob A Scyoa Esa -Price: per piece -Quantity: 7 pieces available -Weight: 2 kg

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Psdpfx Aaow Uifds Eeha Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: good (used), Motor protection switch, star-delta switch -Type: MYehb -Price: per piece -Number: 18 available -Weight: 2 kg Phsdpjb A Scwjfx Aa Eea

Condition: good (used), Motor protection switch, star-delta switch, reversing switch -Type: GV3 M10 -Adjustment range in Amps: 4-6 Price: per piece -Quantity: 4x Available Phsdpfsb A H E Rox Aa Eea -Weight: 0.7 kg

Condition: good (used), Motor protection switch, star-delta switch, reversing switch Phsdpsb A Sc Esfx Aa Esa -Type: MDPPehb -Setting range in amperes: 4.9/5.5 -Number: 16x switches available -Price: per piece -Weight: 2 kg

Condition: good (used), Motor protection switch, star-delta switch, reversing switch Podpfeb A Sczjx Aa Ejha -Type: NNWYehb 15 -Adjustment range in amperes: 1.3 - 2.0 -Price: per piece -Quantity: 10 pieces available -Weight: 0.8 kg

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZM4-58 -Number: 2x switches available -Price per piece -Dimensions: 140/55/H165 mm Podpfx Aajkia Tuj Esha -Weight: 1.1 kg/pc.

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, disconnectors -Manufacturer: Telemecanique, motor protection switch unused -Type: GV2 ME10 / 4-6.3A -Undervoltage release: Schneider GVAX385 Pedpjw S Tq Sofx Aa Esha -Dimensions: 145/90/H85 mm -Weight: 0.7 kg

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, isolating switches -Manufacturer: Klöckner Moeller, motor protection switch high-performance switching drive -Type: S-PKZ2 -Motor protection switch: PKZ2 Phjdpfxouxg Iqo Aa Esa -Contact blocks: A 600 / P 300 A 600 / Q 300 -Number: 50x switchgear available -Price: per piece -Dimensions: 205/80/H145 mm -Weight: 2.0 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod Phodeb A Hufspfx Aa Eja -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. -Quantity: 6 pieces available -Price: per piece

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, isolating switches -Manufacturer: Moeller, motor protection switch -Type: PKZMO 1-1,6 -Number: 3x switches available -Price per piece Pjdpfetxkq Aex Aa Ejha -Dimensions: 85/55/H80 mm -Weight: 0.2 kg/piece

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, isolating switches Phodpfx Aajtxkqve Esa -Manufacturer: Moeller, motor protection switch -Type: PKZMO 1-06 -Number: 5x switches available -Price per piece -Dimensions: 85/55/H80 mm -Weight: 0.2 kg/piece