Used Prism for sale (288)

Year of construction: 2009, condition: good (used), machine/vehicle number: 133, Offer 18291 Pedpfx Adeg Ewi Ne Sjgr Hydraulic horizontal bending and straightening machine Technical data: - Bending force: 100 kN / 10 t - Adjustable bending force: 0 - 100 kN - Stroke: 0 - 150 mm - Working width: approx. 200 mm - Stroke speed: 0 - 0.6 m/min - Tool height: up to approx. 100 mm - Bending capacity: - with MW 100 prism, flat material up to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Straightening capacity Wy at a straightening block distance of 1 m: 100 cm³ - Drive: 400 V / 1.1 kW - Space requirement: approx. W 1100 x H 1000 x D 650 mm - Weight: approx. 400 kg

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm Psdeu Ic Avspfx Ad Segr sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Pedpjzn Iucjfx Ad Segr Measuring head

Condition: used, Year of construction: 1971, pressure capacity max. 80 t Stroke 500 mm Psdpfsvxwzkex Ad Ssgr table surface area 960 x 810 mm spindle pitch 72 daylight between the columns 950 / 540 mm passage 640 mm machine weight ab. 4500 kg dimensions of the machine ca. 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... Psdev Ac Ukjpfx Ad Sjgr -Dimensions: 150/75/H130 mm -Weight: 4.8 kg

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Pedpfx Aouzn D Sod Ssgr -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 170/90/H200 mm -Weight: 10.2 kg

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA YOM 2006 FULL COMPLETE EXCELLENT CONDITION DISMANTLED AND PACKED INTO TETRA BOX VIDEO IN RUNNING CONDITION UNDER REQUEST Pgjdeuzv E Repfx Ad Ssr

Condition: new, TIGERMETAL WH60 – Hydraulic Workshop Press 60 Tons | Electric + Manual Pump Instead of €9,237 gross RRP, now only €5,899 net (€7,020 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH60 workshop press is a powerful and robust solution for demanding pressing operations in workshops and industrial environments. With a pressing force of 60 tons, the machine is ideal for straightening, pressing, and bending a wide variety of workpieces. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine adjustment for sensitive applications. The solid steel construction and the laterally adjustable cylinder allow versatile applications while ensuring high stability and safety. 🔧 Technical Data: Model: WH60 Manufacturer: TIGERMETAL Pressing force: 60 tons Drive: Electric motor + manual pump Motor power: approx. 2.2 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 265 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 670 kg Advantages: ✔ Combined operation (electric + manual) ✔ High pressing force for industrial applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Durable, heavy-duty steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Expandable with accessories (e.g. prisms, support plates) A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons Pedpfjf Sqcrjx Ad Segr 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The pressure cylinder is mounted on a sliding carriage, allowing it to be moved sideways. This ensures optimal use of the maximum frame opening width. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Worldwide delivery available! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: used, Hydro-mechanical NC machine vice, VIS - HYDRAULIQUE\nPrecision machine vice, clamp\nType 20700\nYear of manufacture approx. 2000\nJaw width 150 mm\nJaw height 42 mm\nClamping range 0 to 250 mm\nMax. opening width 253 mm\nClamping force 6 tons\nGuideway height 51 mm\nGuideway length 450 mm\n- Hydro-mechanical machine vice\n- Quick adjustment with clamping ball lock in 8-position hole grid\n- Rigid base body, precision ground on all sides\n- Can be clamped horizontally, vertically, or laterally\n- Guideway with 19 mm guide slot\n- Additional set of prism jaws included\nDimensions (L x W x H): 480 x 150 x 107 mm\nWeight: 32 kg\nGood condition Pedpfxsy Sbxfe Ad Sogr

Condition: used, Door panel postforming line Note: The line began series production in 2022; at this point, all machines were technically synchronized and, if necessary, overhauled. Door panel postforming line consisting of: Portal loading system Manufacturer: Kraft Year of manufacture: 2019 Technical data - with vacuum lifter - 2 infeed roller conveyors - one transport roller conveyor for further transport Wide belt sanding machine Manufacturer: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 consisting of: Wide belt sanding machine, sanding from below Technical data - contact roller - electronic shoe sanding unit - cleaning brush - intermediate transport belt, length approx. 3000 mm Wide belt sanding machine, sanding from above Technical data - identical equipment Pgodpozuziyefx Ad Ssr Complete formatting, laminating and postforming line consisting of: Roller conveyor system Manufacturer: Kraft Year of manufacture: 2019 Technical data - 3 individual elements - centering station Double end profiler Manufacturer: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical data - equipped with infeed conveyor and aligning station - saw unit below - trimming unit - edge trimming unit - prism milling cutter - joint milling cutter - cross edge milling unit - 3 profile milling units - brushes Laminating line consisting of: Infeed conveyor Manufacturer: Kraft Year of manufacture: 2019 Glue application machine Manufacturer: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical data - mechanically overhauled in 2018 - control system completely overhauled in 2022 - with infeed table, manufacturer Kraft - steel platform with stairs and various pumps - glue melting unit GWK Eco 03A Infeed table for laminating line Manufacturer: Kraft Year of manufacture: 2019 Laminating line Manufacturer: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical data - new Siemens Simatic KMG Touch control system - Bürkle GLK press calender - incl. film holder and saw for overhang - working width 1300 mm - 2 temperature control units GWK - column swivel crane for loading paper rolls - extraction conveyor Postforming line Manufacturer: Homag Technical data - infeed table - with 2 saw units, horizontal and vertical - intermediate buffer with 4 levels - infeed to the postforming machine - 2 identically constructed processing sides with glue application - PU pre-melting unit Nordson / VersaBlue, year 2020 and 2004 - pressure zone with revolving magazine for various profiles - various milling units and flap brushes - 2 cooling units BEKO Bekoblizz LC, year 2020 Belt conveyor with inspection system - swivel arm with vacuum suction cup - inspection station for optical inspection of the workpiece Portal destacking system Manufacturer: Kraft Technical data - with vacuum portal and 3 destacking stations Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 3,280 mm, total width: 2,000 mm, total height: 2,700 mm, overall weight: 11,000 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Pjdpfjyttbmox Ad Sogr Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Distance between columns: 2530 mm Throat depth: 320 mm Ram stroke: 200 mm Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Bernardo Master 400 x 1000 universal lathe, including 3-axis digital display Optional accessories: Multifix steel tool holder, 3 straight inserts, 1 prism insert (672.00 € net, not included in the price) Distance between centers: 1000 mm Swing over bed: 400 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mounting: DIN 55029, D1-5 Speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Inch threads: (30) 2 - 28 TPI Tailstock diameter: 45 mm Tailstock travel: 100 mm Psdpfogd Iagex Ad Ssgr Tailstock mounting: MK 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis digital display ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, according to DIN 55029 • Fixed steady rest - bore diameter max. 90 mm • Traveling steady rest - bore diameter max. 70 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Quadruple steel tool holder • Safety device for quadruple steel tool holder • Slip clutch • Micrometer longitudinal stop • Thread dial • LED machine lamp • Reduction sleeve • Change gears • 2 centers • Foot pedal with braking function according to CE • Motor with magnetic brake according to CE standard / operating tool Optional accessories: Multifix steel tool holder, 3 straight inserts, 1 / Factory installation Price: 672.00 € net, not included in the price )

Year of construction: 1999, condition: excellent (used), Control: CNC-controlled and can also be operated manually PC P 2000 MMX-PCI Desktop ATX Color screen 15“, keyboard CNC-Turbo Roughness for WINDOWS TECHNICAL DATA Hard rock test plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear feed unit Waveline 60 Basic Pgodpelxyp Hofx Ad Sor Probe stroke: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel: 400 mm Positional repeatability: < 10 µm Device dimensions W x D x H: 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT/ACCESSORIES  Complete enclosure with electrically operated roller shutters  Hard rock plate 1200 x 500 mm  ISEL feed axis with ball screw  Workpiece clamping plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manually adjustable to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurements  Device table  EMERGENCY stop button on the device table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the hard rock plate  Documentation

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm Pgsdjin Hrqopfx Ad Ser -Weight: 10 kg

Condition: used, Used 3D CNC coordinate measuring machine. ZEISS Prismo 7 – upgraded in 2016 with UCC control, PH10M rotary-head-system, joystick box, SP25 scanning probe, and a PC with RationaDMIS 3D software. Further details available upon request Measuring range X = 900 mm - Y = 1200 mm - Z = 700 mm Price: upon request ᐳᐳᐳ One-of-a-kind item - while available ᐸᐸᐸ Pjdpjy Nzk Aefx Ad Segr Request our detailed quote. Of course, we provide all services such as installation, maintenance, service, training, programming, etc.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm Pedpfx Ajx D Nl Iod Segr • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: excellent (used), Clamping range Ø 15-160 mm Max. Workpiece weight 15 kg Psdpfx Aderry Ege Sogr Weight of the prismatic vice 3.0 kg

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) Pgedpjyhkqnsfx Ad Sor LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Condition: reconditioned (used), functionality: fully functional, 1 branded Esterer electric auxiliary trolley EHK from a small business Track gauge: 790 mm Height top edge of track to top edge of lower creel roller: 390 mm Block support with reversible overrun horn and roller transfer bevel, Liftable chain attachment for prism cutting Lateral movement by separate gear motor Pgodpferrwzbjx Ad Ssr Operation from the clamping carriage Swivel rollers renewed and newly mounted Motor with new bearings Rubber buffer renewed

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool Podpfx Ajx S D U Asd Segr -Tool: for press brake, 7-piece set -Total length: 1053 mm / each 1x 238/58/390/100/270 mm / 2x 75 mm -Width/Height: 97 mm -Weight: 75 kg

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed Podpexaayhofx Ad Sjgr - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual Pgsdpjxaar Dsfx Ad Ssr

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed Pgjdpfx Adsxaakge Ser - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm Podpfx Aoxabnaod Sogr ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Year of construction: 2004, operating hours: 4,400 h, condition: used, functionality: fully functional, machine/vehicle number: 385401, We offer this used Prisma MDN 09 metal detector, manufactured in 2004. Manufacturer: Prisma Model: Metal Detector Year of manufacture: 2004 Pgodpfoy T Emcox Ad Sjr Serial number: MON 09 Registration number: 385401 Voltage: 230 V Frequency: 50 Hz Power consumption: 0.2 kW Total weight: 380 kg The number of operating hours is an estimate. The machine does not have its own integrated hour meter. If you have any questions or require further information, please do not hesitate to send us a message or call us.