Used Prism for sale (282)

Condition: used, Year of construction: 2012, Packaging system: automatic bag feeding, label printing, bagging, folding, sealing and sorting into storage magazines, processing: round single-vision lenses with 60mm-80mm diameter, max. positive power: +14D, min. negative power: -12D, max. cylinder: 4D, prism: 5cm/m, max. prism value at the measurement point: 10cm/m, diameter measurement accuracy: 0.25mm, sphere/cylinder measurement accuracy: 0.02D for measured values up to 6D, 0.03D for measured values up to 14D, prism measurement accuracy: 0.02cm/m + 1%, center thickness measurement accuracy: 0.04mm, output: approx. 800-900 lenses/h, measuring system: FOCOVISION, rotary table: 6 positions. Machine weight: 1450kg, documentation available. Inspection possible by arrangement. Dedpfx Aezun Tfjdhocn

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions Dcsdpfxsxaabfj Adhon

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Dcjdpfxszr I R Es Adhen Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec Dcodpfxeytn Emj Adhjn MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: used, functionality: fully functional, OlympusIX70-S8F Inverted Fluorescence Phase Contrast Microscope. Dcjdpfjuax T Sjx Adhon This Olympus IX70 microscope is capable of phase contrast, DIC, and fluorescence. It comes with an ergonomic tilting binocular head with 10x eyepieces. The microscope has a front and side photo port for adding a camera. The 0.5 N.A. condenser has DP10 and DP20 DIC prisms and Ph1, PhC phase annuli installed with the IX-LWPO polarizer. The 5 position fluorescence turret contains WIBA, and NU fluorescence filters. Also included is the IX-AN analyzer and U-DICT DIC prism. The microscope has a built in 1.0x / 1.5x mag changer. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2022, Equipment: compressed air brake, Lower link hitch Cat.3 Cross Combi prism profile hydraulic folding / tires 480/45-17 hydraulic weight distribution LED lighting & warning signs / 3xDW required / Dodpjr Ty Rujfx Adhecn

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, Giben panel saw model Prismaic 2 SPT H 100 – Year 2002 Machine in excellent condition, fully operational and ready for use. Equipped with side rear loading. Cutting width: 4300 mm. Dcedpfxoy R D Rhs Adhsn ✔ Function tests performed ✔ Complete maintenance (pneumatic, mechanical, and electronic) Machine inspected and overhauled by a company specializing in service and maintenance. 📞 Contact us for more information or to schedule a demonstration.

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t Djdou N A Easpfx Adhjcn stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: used, maximum load weight: 44,050 kg, overall weight: 61,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt: Equipment Gooseneck * Designed in SNT style to optimize the loading area length * Length approx. 3,750 mm * Gooseneck can be raised, lowered, and extended hydraulically * Technical fifth-wheel load: 34,000 kg. For SZM: 6 x 4 or 8 x 4 (or 6 x 4 with 1-axle dolly 235/75-17.5) Low-bed * Designed as a telescoping kettle bridge with a low overall height * With extension at the front and mechanical locking * Length x Width approx. 7,550 mm x 2,740 mm Dcjdezzudwopfx Adhen Rear chassis * With closed outer frame * Diamond plate surface and continuous prism excavator recess approx. 1,450/900 x 505 mm, open at the rear Braking system * WABCO EBS-E, in accordance with EU regulations Axles and suspension * PENDEL-AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle balancing cylinder with automatic RESET function * Technical axle load: 12,000 kg each * Hydraulic axle equalization Tire equipment * 245/70 R 17.5 3PMSF * Load index 143/141L(146/146F) * Manufacturer of our choice Paint finish: * Trailer color: RAL 3002 Carmine Red Included accessories * Steel front wall, pluggable, approx. 400 mm high * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) * 3 kW electric-hydraulic unit for controlling the hydraulic operations * With the exception of hydraulic winches, outer support of the gooseneck with mounting holes for screw-in lashing rings * The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each on the left and right on the rear bevel of the gooseneck (LC 10,000 daN) * Diamond plate surface above the gooseneck. * 3.5-inch kingpin * Guide plate of the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Hydraulic cross member for supporting the gooseneck on the SZM or a dolly. * 1 pair of steel ramps with climbing strips and mounting bolts for bridging the pick-up hooks of the low-bed * Mounting possibility for the steel ramps at the rear between the outer supports of the gooseneck. * 1 lashing ring each on the left and right on the front cross member (LC 10,000 daN) * 6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screw-in rings M24 (LC 8,000 daN). * 2 pairs of screw-in rings M24 (LC 8,000 daN) included. * 6 pairs of recessed lashing rings on the outside of the outer supports of the loading area, foldable inward and outward (LC 10,000 daN). * 1 pair of threaded blocks at the front and rear on the outer supports of the loading area for mounting screw-in rings M24 (LC 8,000 daN). * 1 pair of screw-in rings M24 (LC 8,000 daN) included. * Preparation for mounting screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locking mechanisms. * Mechanical bolt-tab coupling of the low-bed to the chassis for exchanging the loading area or installing extension supports. * With electro-pneumatic-hydraulic couplings * Suspension rail at the front on the rear chassis for the low-bed for loose support ramps * 4 pairs of lashing rings hanging in the outer frame of the rear chassis (LC 10,000 daN) * 1 pair of lashing rings lying at the front in the excavator recess of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying in the excavator recess in the area of the 2nd axle of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying at the rear in the excavator recess of the rear chassis (LC 10,00

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, warranty duration: 6 months, Function The TAM 25/600 precisely separates and cuts ejector pins, ejector sleeves, and knockout punches in the shortest possible time. Workpieces with diameters from 0.5 to 25 mm made of tool steel and hard metal can be processed. Dcsdpfx Adjzq Srwohen Your advantages: • User-friendly quick-change system • Fast loading and unloading of workpieces • Separating and cutting to length in a single operation Simply place the workpiece in the quick-change prism, set the desired finished dimension, and separate and cut to length in one step. An optional additional clamping device is available for extremely thin, short, or offset pins. • Additional clamping device for thin, short, and offset pins Precision After separating, the work table is locked in the end position, the length is measured precisely, and ground to the finished dimension using an integrated micrometer feed. The wear of the grinding wheel is compensated by tracking the grinding spindle. Your advantages: The integrated diamond automatically dresses the wheel. On request, CBN or diamond grinding wheels are also available as optional equipment for the TAM 25/600. • Precise workpiece positioning via micrometer screw • Integrated dressing diamond for the grinding wheel • Integrated coolant system to prevent overheating of the workpiece • Trackable grinding spindle, so that the cutting edge of the grinding wheel always remains in the 0 position We also offer overhaul services for your old separating and cutting machine; simply contact us!

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Djdpfxezn N Iko Adhocn

Condition: good (used), Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts Dcedpsb Uhn Nsfx Adhon -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

Condition: used, Discharge take-off table: - total length 7850 mm - total width 1200 mm Dcodpfx Ajxuiq Eodhon - four upper hold-downs - prism guide 70 mm - hydraulic feed

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6114676, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 180 kg Dimensions: 850/620/1600 mm Installed power: 0.7 kVA Customs tariff code: 8460.3930 TECHNICAL CHARACTERISTICS DOUBLE CUP PRE-GRINDING AND SUPER-FINISHING WHEEL (FOR HARD METAL) - Abrasive: diamond - Diameter: 175 mm - Bore: 20 mm Spindle speed: 2500 rpm Cutting speed: 23 m/sec Spindle bearing: precision plain bearing Micrometric infeed of the workpiece by means of a fine-pitch threaded spindle, division: 0.01 mm Adjustment of approach and clearance angle: max 26° TOOL HOLDER CLAMPING CAPACITY: - Prism-shaped tool bodies: max 40x40 mm - Cylindrical tool bodies: max 16 mm - Circular cutting tools: max 85 mm MOTOR POWER: - Drive motor: 0.55 kVA - Pump motor: 0.1 kVA Coolant tank capacity: 10 l. Dcjdsw T S Tbjpfx Adhsn All technical specifications are provided without obligation and subject to error or omission.

Condition: used, Year of construction: 1996, saw blade diameter 300 mm cutting diameter 100 mm capacity 45 degrees: flat 105 x 80 mm capacity 45 degrees: round 100 mm capacity 60 degrees: flat 80 x 70 mm capacity 60 degrees: round 90,0 mm Dodozl E Twopfx Adhecn dimensions of saw-blade 300 x 2,5 x 40 mm hole of sawblade 40,0 mm stroke 150 mm cutting speed 17 + 33 U/min voltage 400 V weight 340 kg range L-W-H 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head - Operatorâ??s manual

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Dedpfx Aezrn H Hsdhecn

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Dcedpfx Ajtr A Evjdhsn Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Number of axles: 3

Condition: new, Year of construction: 2023, type of input current: three-phase, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Dedpfoy Sw T Sex Adhecn

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Scribing prism: Prism block for scribing plate, clamping plate, straightening bench ... 7 pieces -Prism width/dimensions: see photos / technical drawing Djdpezfy Rkefx Adhjcn -Submission/Price: complete -Overall dimensions: 645/79/H80 mm -Total weight: 24.6 kg

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length - 120 - 450 mm max. cutting height - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above Dcsdegp Su Ejpfx Adhen - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Djdpfx Adex Ecg Uohocn Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW Djdpfjw E H E Rjx Adhscn - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 450 kg, overall weight: 195 kg, total height: 2,000 mm, total length: 1,800 mm, total width: 815 mm, New and unused! Type: KBF-450-H Load capacity: 450 kg Lifting drive: electrohydraulic Mobile lightweight crane with counterweight Compact design Dcedpfx Adsy H Da Uohjn Suitable for use in confined spaces Enables precise, millimeter-accurate lowering Safe, specialized hydraulic system Fits through any standard door Easy to operate Solid rubber tires for smooth movement on uneven ground Small turning radius – maximum mobility Boom adjustable in five length positions Quickly folded and ready for transport Are you looking for a flexible and mobile crane for lifting tasks in tight spaces? Do you need a unit that can be quickly and easily transported from one job site to another? Then you have found the perfect mobile counterweight crane. With a load capacity of up to 450 kg, the KBF series optimizes workflows, saves you time, and protects your employees’ backs. Mobile Mini Jib Crane KBF with removable counterweights The mobile mini jib crane KBF impresses with its compact structure and exceptional versatility. As a lightweight mobile counterweight crane, it is ideally suited for operation in the smallest of spaces. Thanks to its tight turning radius and precision hydraulic system, the boom may be positioned and lowered with millimeter accuracy, enabling fast and safe handling operations. With its adjustable boom, which can be set to five different positions, the mobile crane offers maximum flexibility. It passes easily through any standard doorway. Thanks to its clever design and straightforward operation, the KBF can be folded quickly and is immediately ready for transport. Its compact dimensions allow for transportation with smaller vehicles. Storage and transport are further simplified by the removable counterweights, each weighing only 22 kg – there are 13 counterweights included. Additionally, it features solid rubber tires; combined with its two large front wheels and small rear wheels, it easily traverses minor surface irregularities. The solid rubber tires provide noticeably more comfort when pushing and make maneuvering on uneven terrain easier. The robust construction and safe, specialized hydraulic system ensure consistently reliable and easy use. The KBF series mobile jib crane is available not only in the standard version, but also as an optional electric model for greater convenience. Type KBF-450-H is equipped with an electrohydraulic lifting mechanism for the load hook, which can be operated via a practical wired remote control. More information available from Tiger Hebezeuge / KBF Series INCLUDED - Clamp for round stock 80–300mm / 250kg - Block clamp with prism jaws 100–280mm / 150kg - 2-leg chain sling 1600 kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Dcsdpfemck Ryjx Adhen Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm EQUIPMENT 4x 3D angle – 300 mm 6x Stop – 150 mm 6x Stop – 225 mm Dcodozxcmhspfx Adhon 1x Protractor 2x Prism 1x Eccentric 1x Flat angle 12x Clamping/tensioning screw 12x Clamp