Used Press Trimming for sale (13,968)

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Tsdpozlb D Sofx Aa Ioc Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: like new (used), System: Chamber filter press, laboratory press Application area: Chamber filter press, pilot plant Tjdpfx Aewqzibsa Iec Design: side-bar guided Type: REWA Filter plate size: 150x150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Cake thickness: 15 mm Filter cloths: optionally available tailored to the medium Discharge: open Filter area: approx. 0.2 m² Press content: approx. dm³ Plate transport: manual Pump technology: included - optional Purchase or rental: Inspection of the systems by appointment at our facility. Condition: Demonstration unit, as new Weight: approx. 70 kg Length: approx. 70 cm Width: approx. 40 cm Height: with frame + pump approx. 85 cm Miscellaneous: Would you like to rent, lease, or buy this system? Contact us, we are happy to be at your disposal.

Condition: used, Plant: Used membrane filter press Type: Passavant Noggerath Application area: Sludge dewatering Design: Sidebar frame Filter plate size: 1200x1200 Number of plates: 100 units / membrane-mix Filter plates: PP Tjdpfswy H Nrjx Aa Ijc Filter cloths: optionally available, tailored to the medium Press volume: approx. 2900 dm3 Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the plant possible by appointment at our facility.

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all Tsdpji Db Ersfx Aa Ijc allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: ready for operation (used), pressure 30.0 t Todpfx Asznng Soa Ijc punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve Todpfxjzkl Hue Aa Isc - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm Tjdpfx Aoxaa Ixsa Iec dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l Tjdpfxexaaips Aa Isc work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: ready for operation (used), System: Netzsch 800 /80 sidebar Size of plate: 800 x 800 mm Chambers: 80 Filterplates: Polypropylene Filter cloths: as an option Outlet: open Filter surface: approx. 88,48 m² Volume of filtercake: approx. 1272 dm³ Working length: approx. 4656 mm Filter pressure: 15 bar Closing pressure: Min. 380 bar, max. 410 bar Plate closure: electro hydraulic Plate transport: manual Dimensions: LxBxH approx. 5300 x0900 x 1040 mm Weight filterpress: approx. 4 t Underframe: available from stock as optional accessories Dimensions: LxBxH 8000 x 1050 x 2020 mm Weight: approx. 5 t Control cabinet: yes Pumps: as an option Accessories: mixing tank optionally available as a special accessory 3.00x1.50x2.20 m Special services: Refurbished service to customer optional. The system goes through a pre-delivery service check or a complete overhaul. Rent or Buy: Machine can be inspected at our factory We can offer Spare Parts, Accessories and Service for your Chamber Filter Press - Rittershaus & Blecher, Netzsch and more Filter Press Brands. Tedpfod E Dgkox Aa Isc

Condition: new, Hydraulic cylinder Cilinder stand exchange cylinder Tsdpsd Hgahofx Aa Ioc Chamber filter press As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats.

Year of construction: 1999, condition: used, Colour: Grey Membrane press Tedownhicspfx Aa Ioc Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, pressure 100 t Tsdpfx Aaexabrfs Ioc punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: new, pressure 80.0 t stroke 250 mm Tjdpfxjw U U Svj Aa Ioc table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: new, pressure 30 t Tsdpfx Ajxabvkea Ijc throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: new, pressure 5,0 t throat 215 mm workpiece height max. 445 mm Mandrel diameter 50 x 50 x 645 mm table plate Ø 275 mm total power requirement manuell kW weight of the machine ca. 160 kg. Tsdpfx Aaexabxfe Ijc dimensions of the machine ca. 370 x 550 x 810 mm Description : - for pressing in and out of bearings, bushings, ... - the basic body of the model DP 5 made of high-quality gray cast iron - Includes mounting holes, ideal for mounting on a workbench - suitable for bushing, straightening, bending, broaching, ... - variably adjustable lever bar, depending on the required effort - ideal for repair shops and the general workshop area

Condition: excellent (used), Year of construction: 2001, - No. 4 Schuler 630-ton presses - Capacity: 630 tons - Stroke: 1,300 mm - Die cushion tonnage: 24 – 160 tons - Die cushion stroke: 200 mm - Die opening (Pmi): 800 mm - Work surfaces: 2,500 x 2,100 mm - Mobile press tables: No. 2 - Approach speed: 600 mm/min - Working speed (50%): 96 mm/min Tedpszy Uvqefx Aa Ijc - Working speed (100%): 46 mm/min

Condition: used, Ferwood Code: RU0008966 - Manufacturer Code: 4-075-01-0813 - Condition: Used - Compatible Machine: HOMAG EDGE BANDER - Weight: 5KG - Dimensions: 36X26X21 - If interested we offer a revision service, contact us. Todsvazwrjpfx Aa Iec

Condition: used, Year of construction: 2005, Pneumatic Press Tox Inventory No. 3941 Power Pack Press Tox Pressotechnik Type Stiskalnika 12050052 Year of Manufacture 2005 Type BS 15.30.100.06 No. 800322.35 * Two-hand control STE 003-03- 1/2" * Pressure force kN * Working stroke mm * Power stroke mm * Reach approx. 220 mm * Table size 450 x 400 mm Tsdpfxszzruge Aa Ioc * Installation height approx. 265 mm * 2 manual controls * Air inlet bar * Electrical connection 230 V * Space requirement: approx. W 700 x H 2050 x D 1050 mm * Weight approx. 500 kg

Condition: excellent (used), Year of construction: 2004, Injection molding machine NEGRI BOSSI V1250 1,250 tons Year: 2004 Tsdsw Uaw Dopfx Aa Ijc Operating hours: 32,000 New screw and barrel

Condition: used, Year of construction: 2021, total length: 3,720 mm, total width: 2,300 mm, total height: 2,750 mm, Colour: White Weight: 7.700 kg Price: On request - Year: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 2102061 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 135 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 210 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard Tjdpfxezrgnco Aa Ijc - Transport dimensions: 3720mm x 2300mm x 2750mm (l x w x h) - Transport weight [kg]: 7700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Technical Data: - Punching force: 700 kN Tsdezzzi Hspfx Aa Isc - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm - Stroke adjustable in steps: 0 to 75 mm - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch - Center-finding device - Support table with stops and scales

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, working width: 300 mm, working length: 3,000 mm, Block press / Stationary press for multi-layer parquet Manufacturer: Soest Type: T 80 Hydraulic cold press, previously used for pressing multi-layer parquet (top layer, core layer, and counter layer) Year of manufacture: 2017 (CE marking) Press width: approx. 300 mm Press length: approx. 3000 mm 4 press cylinders, diameter approx. 80 mm Pressing force: 80 t, equivalent to approx. 9.2 kg/m2 Tedpszzmv Ejfx Aa Ioc Total connected load: approx. 3.5 kW Dimensions: approx. 4200 x 980 x 2150 mm (L x W x H) Weight: approx. 3300 kg

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1737/02, overall weight: 1,995 kg, This multi-chamber baling press compacts a wide variety of materials. This top-loading press is ideal for paper, plastic, metal cans, and plastic packaging. Tsdpfx Aaezr Hxzs Isc

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimensions 2,240 x 880 mm, Tsdpfx Aaeul Uy Hs Ijc motorized height-adjustable counter supports, 4 pressure beams, individually switchable on and off, 4 swing grids, available from Seevetal location, sold "as is" and as inspected, Ex works, excluding transport, subject to prior sale.

Condition: used, Year of construction: 2019, Corpus press Manufacturer: LINYI JIANZHONG WOOD MACHINERY Type: JJZ-CP Year of manufacture: 2019 The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The feeding and removal of the glued elements are carried out automatically via powered roller conveyors. Technical data - Max. pressure 500 t (adjustable) - Max. filling height 1300 mm - Min. filling height 900 mm - Max. filling size 1300 x 2500 mm - Press dimensions 3600 x 1370 x 4500 mm - Press placement approx. 500 mm below floor level - Feeding table 2000 x 1960 mm - Receiving table 2350 x 2500 mm - Max. power 13.2 kW - Weight 12000 kg - CE marking - Capacity: 6 batches per hour 2 corpus presses are available for sale. Note: Todpfx Aezuzwkja Iec The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.