Used Preservation Facility for sale (2,647)

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction Evaporation chamber | Stainless steel, full inspection access Heat exchanger | AISI 316L tubular exchanger Vacuum pump | Liquid-ring system with cooling recirculation Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless-steel centrifugal and mono volumetric discharge pump Vapor condenser | Stainless-steel surface condenser Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks Bedsykrdbspfx Aa Ueld

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Bljdpoyfgymsfx Aa Uod Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), OPEM Arabella Vacuum Coffee Packaging Line – 250 g – with Gas Flushing & Valve System – Year 2005 Manufacturer: OPEM Model: Arabella Year of manufacture: 2005 Condition: Very good, fully functional Location: Germany Bsdpfoynn A Ijx Aa Ueld Availability: Immediately available Machine Description For sale is a complete vacuum coffee packaging line for 250 g bags (ground or whole beans). The system is equipped with: • Vacuum brick packaging system • Inert gas flushing (nitrogen flushing) • Integrated aroma valve system (degassing valve) • Including dosing system • Packaging from roll stock • Compact monoblock design • Industrial-grade, "Made in Italy" This machine is ideal for freshly roasted coffee and guarantees optimal aroma preservation and extended shelf life through the combination of vacuum, inert gas flushing, and valve. Technical Data • Pack size: 250 g • Packaging type: Vacuum brick pack and soft-gas-pack bags • Output: approx. 20–30 bags/minute (depending on product) • Gas system: Nitrogen flushing • Valve system: Integrated • Dosing system: Included • Packaging from roll stock • Year: 2005 Scope of Delivery • OPEM Arabella main machine • Dosing system • Gas flushing unit • Valve application system • Control cabinet / electrics Spare parts available

Condition: excellent (used), Year of construction: 2018, Source Technology PowerHeater and FlexiCut machines. Direct from meat-free facility, used for making vegetarian 'chicken style' products. In excellent condition and rarely available for sale as used machines. New price of these machines is £750,000 Blsdpfet Rh T Dsx Aa Ued

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 2.765, We are offering this used BvL cleaning system, DTH-2 DTH-2 1000/2000/3000, year of manufacture 2013. Automatic cleaning and degreasing unit for fast and economical cleaning of oil-contaminated and soiled workpieces using aqueous solutions on an alkaline, neutral, or acidic basis. Equipped with manually operated sliding doors at the front and rear. Cleaning is performed by an integrated spray system inside the treatment chamber using an oscillating special nozzle system with wide-band nozzles. Includes complete overhead rail and lifting system from Soloan for suspending and transporting components. Type: DTH-2 / 1100/1900/3500 Year of manufacture: 2013 Machine number: 2.765 Pump power: 7.5 / 5.5 kW Heating capacity: 60.0 / 42.0 kW Tank volume: 1500 / 1500 liters The system must be dismantled and collected by the buyer. Further details upon request. Bljdeyngg Sjpfx Aa Uod If you have any questions or require more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, construction height: 1,120 mm, drive type: Lithium-Ionen, construction width: 890 mm, Scrubber Dryer Chassis number: NR810NEW Condition: New machine Technical condition: New Front tyre condition: New Rear tyre condition: New Battery voltage: 24V Battery capacity: 205Ah Battery type: Lithium-ion Battery year: 2025 Bledeym Hbgjpfx Aa Ujd Battery condition: New Description: - Efficient cleaning performance of 4,860 m² per hour. - Compact size with a low center of gravity, small turning radius, and flexible operation. - Integrated waterproof touch panel design; the LCD displays operating parameters and error codes, making parameter adjustment and fault diagnosis easier. - Three speed levels and adjustable water flow. - In-house developed controller with motor overload protection and low battery safeguarding functions, effectively extending motor and battery life. - An ECO mode reduces the vacuum motor’s output and noise level, ideal for noise-sensitive environments. - Electric one-touch lifting function for brush and squeegee holders; automatic squeegee lift during reverse driving for safety and efficiency. - Dual brush/pad design with innovative connection for easy brush or pad loading and unloading. - 120-liter fresh and wastewater tank capacity, reducing refill and emptying frequency. Automatic alarm for empty fresh water tank or full waste water tank. - Large opening on the removable waste water tank; tool-free design facilitates easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to automatically stop if the operator leaves the seat. - Non-slip, durable tyres provide secure grip and optimal traction even on smooth or wet floors.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR1060NEU, total length: 1,800 mm, sweeping width: 1,060 mm, empty load weight: 477 kg, construction height: 1,350 mm, drive type: Lithium-Ionen, construction width: 1,150 mm, Scrubber Dryer Bjdpsym Hbasfx Aa Usld Chassis Number: NR1060NEW Condition: New machine Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 36V Battery Capacity: 205Ah Battery Type: Lithium-ion Battery Year of Manufacture: 2025 Battery Condition: New Description: The NR1060 is a medium to large, front-wheel-drive scrubber dryer with dual brushes. - Delivers an efficient cleaning performance of 6,890 m² per hour. - The coarse dirt container in the recovery tank effectively filters large debris to prevent drain blockages. - The entire machine is built with a modular and compact design, offering high maneuverability and flexibility. - The low center of gravity of the water tank and battery ensures high driving safety and easy maintenance. - Integrated waterproof touch panel design for simple operation, e.g., driving speed, water flow adjustment, and brush lifting/lowering. - Large LCD display shows machine settings, facilitating fault diagnosis and maintenance. - Standard electronic water level indicators for both clean and recovery tanks with intuitive and user-friendly displays. Automatic alarm and shutoff when the recovery tank is full. - One-touch soft start for the motor with overcurrent and undervoltage protection for the control electronics. - Patented quick-release disc brush system enables automatic loading and unloading of brushes with the press of a single button. - ECO mode reduces energy consumption and noise levels, ideal for low-noise work environments. - Operating time: 5–6 hours per charge. - Non-slip, durable tyres for secure grip and optimal traction, even on smooth or wet floors.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ANB510NEU, total length: 1,030 mm, sweeping width: 580 mm, empty load weight: 220 kg, fuel type: electric, construction height: 1,045 mm, drive type: Elektro, construction width: 580 mm, Scrubber Dryer Chassis Number: ANB510NEU Condition: New Technical Condition: New Front Tyre Type: Polyurethane Front Tyre Condition: New Rear Tyre Type: Polyurethane Rear Tyre Condition: New Battery Voltage: 24V Battery Capacity: 120Ah Battery Type: Lithium-ion Battery Year: 2025 Battery Condition: New Description: Blodpfxeym Ha No Aa Usd - Theoretical cleaning performance: 2,570 m² per hour - AI-based scrubber dryer robot for commercial areas - Autonomous navigation with advanced 3D LiDAR technology - Powerful NVIDIA Xavier AI edge computing chip for intelligent route planning and environment adaptation - High level of safety with 360° sensor technology - Robust, durable construction - Low-maintenance and updatable via OTA without technician

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: imopXLPlusNEU, total length: 351 mm, sweeping width: 460 mm, empty load weight: 27 kg, fuel type: electric, construction height: 1,199 mm, drive type: Elektro, construction width: 480 mm, Scrubber dryer machine Chassis number: imopXLPlusNEU Condition: New unit Bsdpfjym E U Sex Aa Ujld Technical condition: New Front tyre condition: New Rear tyre condition: New Battery voltage: 24V Battery capacity: 9Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: - Productivity (per hour) theoretical max: 1,800 sqm - Battery runtime (100% charge), max. operating time in min.: 85 - Battery charging time (100% charge) – max. time in hours: 5 - The machine is offered including battery and suitable charger

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: imopLiteNEU, total length: 340 mm, sweeping width: 368 mm, empty load weight: 17 kg, fuel type: electric, construction height: 1,200 mm, drive type: Elektro, construction width: 430 mm, Scrubber dryer Chassis number: imopLiteNEU Condition: New device Technical condition: New Front tyres condition: New Rear tyres condition: New Battery voltage: 18V Battery capacity: 12Ah Bjdpeym E Uxjfx Aa Ueld Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: - Productivity (per hour), theoretical max: 1,400 sqm - Battery runtime (100% charge), max. runtime in min.: 70 - Battery charging time (100% charge), max. charging time in hrs: 3.5 - The device is offered including battery and matching charger.

Condition: used, Year of construction: 2000, Solid Metora MB 330 metal band saw, renowned for its stable cutting performance and durable build quality. This model comes fully equipped with roller conveyors on both the left and right sides, a digital end stop, and a mist coolant system for efficient, clean, and precise cutting results. Bljdpfoymzgkjx Aa Ued Perfectly suited for cutting profiles, tubes, and solid materials in steel, stainless steel, aluminium, and non-ferrous metals. Ideal for workshops and production facilities requiring repeatable accuracy and reliability. Specifications: Throat depth: 520 mm. Maximum workpiece height: 320 mm. Saw band speed: 16 – 96 m/min. Saw blade dimensions (length × width × thickness): 4,600 × 32 × 1.1 mm. Cutting capacities: Round workpieces, 90° / 45°: Ø 320 mm. Round workpieces, 30°: Ø 250 mm. Square workpieces, 90° / 45°: 320 × 320 mm. Square workpieces, 30°: 240 × 240 mm. Maximum flat profile (90°): 500 × 320 mm. Maximum flat profile (45°): 330 × 320 mm. Maximum flat profile (30°): 320 × 230 mm. Dimensions: Saw machine: 2200 x 1400 x 1400 mm (LxWxH). Machine weight: approx. 800 kg. Roller conveyor (left): 5000 x 1000 mm. Roller conveyor (right): 7000 x 1000 mm. Total set length: 14000 x 1500 x 1400 mm.

Condition: new, Three-rollers - Round bending machine Akyapak ASM 140-20/4 Optional equipment included in the price: hardened rollers motorized rear roller adjustment Digital Sheet width 2050 mm Sheet thickness 4.5 mm max. Bend the sheet thickness 4.0 mm Roll length 2050 mm Blsdpfod R Iqxox Aa Ued smallest diameter 210 mm Roller diameter - top 140 mm Weight 1530 kg Dimensions L-W-H 3220 x 1200 x 900 mm Facilities: Upper and lower roller electr. Driven Upper roller can be swivelled out Conical bending device asymetric roller arrangement Self-braking main engine sep. Control and control panel Safety line Footswitch User manual in English CE Mark / Declaration of Conformity

Condition: used, mileage: 60,000 km, power: 124 kW (168.59 HP), first registration: 12/1974, overall weight: 11,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 4,680 mm, loading space height: 1,450 mm, Year of construction: 1974, total width: 2,470 mm, total height: 3,050 mm, Equipment: all wheel drive, 1st hand. German fire truck with valid TÜV (general inspection) and SP (special inspection) until 12/2026. Regular registration valid until 18.02.2026. Bljdpsyndg Nofx Aa Usd For 30 years (after its official service life), this vehicle has only been kept as a collector’s item in a hall, always regularly serviced, driven, and exceptionally well maintained by the fire department. In the meantime, it was transferred to the local airport. Bachert body in an aluminum-steel composite construction, extremely robust and built to last, with great attention to detail. The heavy-duty roller shutters and flaps are all still working perfectly. The 1113 starts immediately and is ready to drive. Good original condition. There are signs of use from over 50 years of firefighting service. No serious defects or significant rust damage are visible on the vehicle. Overall, a solid round-hood model. LAF 1113 B with 3 windshield wipers. Power steering. OM 352 A 6-cylinder diesel engine with turbocharger and just under 170 hp. 85 km/h is registered as the top speed in the papers. 5-speed manual transmission. PTO (power take-off). Hydraulic system for auxiliary equipment. Selectable 4x4 all-wheel drive. Wheelbase: 4200 mm. 3 seats. Large Rockinger trailer coupling with air connections and 10,000 kg braked towing capacity. Maximum unbraked towing capacity is 1,500 kg. RW2 rescue vehicle body with winch, power generator, and light mast. Winch: Rotzler 5 tons with 65 m steel cable. Power generator: Knurz-Kirsch 20s. Output: 20 kVA. Light mast at the left rear, hydraulically extendable. Roof is accessible via rear ladder, with aluminum checker plate, and two large storage boxes. Overall vehicle dimensions: 7300 mm long / 2470 mm wide / 3050 mm high. Box body dimensions (external measurement) approx.: 4680 mm long / 2450 mm wide / 1450 mm high. Tires: 8.25-20/14 PR, apparently without DOT marking, not porous and in good condition. The 1113 was previously registered as “Other Vehicle – Fire Brigade – Rescue Vehicle”. Battery charging socket and manual battery disconnect switch on the driver’s seat console. The odometer was replaced in 2018 and now shows 141,000 km. The original odometer with 27,000 kilometers was retained and correctly handed over to us by the fire brigade. The actual total mileage is a maximum of 60,000 kilometers, in reality likely much less. As the inspection log has been continuously maintained with mileage figures for the last 25 years, both the mileage and the odometer replacement during this period can be reliably and continuously documented. In addition to the original odometer, there is a box full of original Daimler-Benz and Bachert documents, as well as paperwork such as logbooks and generator documentation, most of which are original documents from the year of manufacture 1974. Everything is in good and well-preserved condition. The documents are not for sale separately, nor will they be copied; please accept these facts as presented. Only the buyer of the 1113 will receive these treasures along with the vehicle from us. This offer is only for tradespeople, freelancers, authorities (BOS), public institutions, and all kinds of comparably self-employed businesses. Sale to private end users is, unfortunately, not possible. Interim sale and errors excepted at any time. Net price: €18,900!

Year of construction: 2024, condition: used, machine/vehicle number: KLB240509-2, Flexible laser beam width 10 - 190 mm, 6 different cleaning patterns, air-cooled fiber laser, laser power 300 W, hose package length 5 m. Bsdoyn Nmbepfx Aa Ujld

Condition: used, Year of construction: 2006, Parts Cleaning System Control system: SIMATIC OP17 Operating hours: approx. 56,554 h Permitted cleaning medium: KWS Vbf Performance data Batch size (max., approx.): 2 x (480 x 320 x 200) mm Batch weight (max., approx.): 150 kg Throughput (approx.): 8 batches/h Cycle time (approx.): 7.5–15 min Distillate quantity (approx.): 70–140 l/h Loading height (approx.), manual loading: n.a. mm Loading height (approx.), automatic loading (option): 855 mm Filling volume working tank (approx.): 290 l Filling volume flood tank 1 (approx.): 440 l Filling volume flood tank 2 (option) (approx.): 440 l Blsdpfx Aeymddfea Usd Filling volume flood tank 3 (option) (approx.): n.a. l Filling volume distillation (approx.): 140–420 l Installation dimensions (approx.): 8,190 x 5,300 x 2,650 mm Weight (approx.): 4,800 kg

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Completely overhauled OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – mechanically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent condition both technically and visually. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as necessary, including but not limited to ball rollers and drive spindles. A comprehensive geometric measurement, alignment, and additional verification using a laser measurement system were carried out afterwards. The machine bed as well as the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, have been completely renewed. Additionally, the machine has been completely repainted and is also visually in an extremely well-maintained condition. The generator and control system have been cleaned and technically checked. The generator’s climate control unit has also been cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing in accordance with OPS Ingersoll’s quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Manufacturer: Ingersoll (OPS Ingersoll) Bodpfoykn Ngox Aa Ujld - Type: Die-sinking EDM machine - Model: OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn fast programming - Powertec Handheld – multifunctional manual control unit - Manual eroding with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Amperes, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up carousel changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special features: - Linear measuring system on all axes (Z-axis standard on series model)

Condition: ready for operation (used), Year of construction: 2002, Immediately available from facility closure: Bjdeypbkhepfx Aa Ujld CNC Horizontal Machining Center MAZAK Type FH 5800 The machine is sold with all tools, pallets, and tool magazines. CNC control Mazatrol PC Fusion CNC 640 M Travel paths X/Y/Z: 710/610/660 mm Table indexing: 360 x 1 degree Pallets: 6 units Pallet size: 400 x 400 mm Spindle: SK 40 Tool magazine: 120 positions Spindle speed: 35 – 15,000 rpm Knoll high-pressure cooling system Chip conveyor Weight: 15 tons Offered at a price of EUR 18,000 plus VAT ex location

Condition: used, mileage: 44 km, power: 125 kW (169.95 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,215 mm, next inspection (TÜV): 11/2027, color: white, driver cabin: other, emission class: euro6, number of seats: 3, loading space volume: 25.9 m³, loading space length: 4,850 mm, loading space width: 2,260 mm, loading space height: 2,280 mm, number of beds: 1, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, soot filter, traction control, Navigation via mobile phone possible. Wind deflector, fresh water tank on the right, 9-speed automatic transmission, air conditioning, central locking with remote control, electrically adjustable and heated exterior mirrors, electric front windows, onboard computer, multifunction display, cruise control (speed regulator), multifunction steering wheel, rear parking assist, external storage compartment, spare wheel with travelling tires, light and rain sensor, high beam assistant, LED daytime running lights, fog lights, radio with large display and Bluetooth hands-free system, touchscreen, USB interface, Apple CarPlay, Android Auto, long wheelbase, sleeper cab with auxiliary heater, heat-insulating glazing, storage package, tachometer, driver's airbag, anti-lock braking system (ABS), traction control (ASR), comfort seats, center armrest, driver’s comfort seat – height-adjustable with armrest and lumbar support, start/stop function, particulate filter, full service history, sleeping area, immobilizer, headlight range control, sleeping facility, side marker lights, outside temperature display, power steering, loading area for up to 10 Euro pallets, sliding tarp on right, central stanchions, storage box left and right, overhead storage above windscreen, permissible gross weight 3.50 t, heated windscreen, front mud flaps, shift point indicator, interior filter: pollen filter, multifunctional front double passenger seat, overhead console, electronic brake force distribution, brake assist, height-adjustable steering column (steering wheel), electronic stability program (ESP), 185 A alternator, body/superstructure: flatbed with tarpaulin, wheelbase 4215 mm, drive type: front-wheel drive. Over 150 transporters and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank, or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no liability for equipment details. Listed features should be checked separately if necessary. Subject to changes, mistakes, and prior sale. Delivery available for an additional charge. Export license plates can be arranged on-site. Trade-in of your old vehicle possible. Retrofitting options include: - Towing hitches also up to 3500 kg possible - Auxiliary heaters - Display for reversing camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear-view camera - Workshop fittings - Cruise control - Retrofitting of a tail lift and other individual solutions for your business needs available for an additional charge. Bodpfx Aaex E U I Hj Usld

Year of construction: 2021, condition: like new (used), functionality: fully functional, - Unused MTM "Finisher" robotic deburring and cleaning system - Fully automated processes: pre-cleaning, deburring, cleaning, drying - 6-axis robot, optimal access to complex geometries - Brush deburring, high-pressure cleaning/deburring, eco steam cleaning - Only robot axes 5 & 6 in the wet area → extended maintenance intervals - Energy-saving systems: MTM Ecoheater & Eco-Pack - Compact design, various loading & unloading concepts - Retrofit process modules for future requirements Bodpfx Aasympzco Ueld - Ideal for engine parts, turbine housings, brake components, hydraulic/pneumatic components

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, usable tank capacity: 50 l, input voltage: 230 V, tank capacity: 80 l, total width: 570 mm, total length: 750 mm, total height: 1,290 mm, input frequency: 50 Hz, DGUV certified until: 03/2027, sourdough fermenter Model: Tradilevan TL 40 Bledpfxjhwzkvs Aa Ued Plant for mixing, maturing and preserving liquid sourdough Automix and Variospeed easy touch control with recipes Mixing time and speed adjustable stainless steel version Outlet valve/height 415 mm Tank capacity 80 liters, max 50 liters Sauerteg Connection 400V / 50Hz / 2 kW, 16A-CEE plug Dimensions: 570 x 750/940 x 1290 mm, WxDxH new machine with 12 months warranty Options: Built-in scale Visit our large bakery machine park!

Condition: used, mileage: 5,000 km, power: 96 kW (130.52 HP), first registration: 01/2025, gearing type: mechanical, suspension: other, number of seats: 5, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, soot filter, traction control, Roadworthy, touchscreen, excellent condition, accident-free, demonstration vehicle, 360-degree camera, metallic paint, 5-door, one owner, start-stop system, Euro 6d emission standard, no environmental badge (category 1), synthetic leather, tire repair kit, Apple CarPlay, ISOFIX front passenger seat, Android Auto, fully digital instrument cluster, distance warning system, foldable front passenger seat, black, dual-zone automatic climate control, front side airbags, passenger airbag, rear side airbags, front curtain/head airbags, rear curtain/head airbags, height-adjustable front seats, leather steering wheel, LED headlights, automatic light control, keyless entry (Keyless-Go), front parking sensors, self-steering parking assist, rear parking sensors, parking assist, rearview camera, park assist system, daytime running lights, LED daytime running lights, emergency braking assist, digital radio (DAB), rain sensor, traffic sign recognition, digital speedometer, emergency call system, hill start assist, tire pressure monitoring, traction control, electronic traction system, electric window lifters, seat heating, heated front seats, phone connectivity, hands-free system, Bluetooth hands-free, multifunction steering wheel, radio, radio/MP3, MP3 interface, USB port, tinted windows, rear privacy glass, folding exterior mirrors, heated exterior mirrors, auto-dimming mirrors, auto-dimming interior mirror, power steering, load-through facility, electric exterior mirrors, rear headrests, brake assist, speed limiter, ISOFIX child seat mountings, split rear seat bench, alloy wheels, center armrest, lane keep assist, driver drowsiness detection, high beam assist, electronic parking brake, manual transmission, on-board computer, particulate filter, start-stop system, fully digital instrument cluster, driver assistance (drowsiness detection, traffic sign recognition, park steering assist, rain sensor, high beam assistant, light sensor, emergency brake assist, hill start assist, lane keep assist, distance/collision warning), comfort features (automatic climate control, power steering, central locking). Bodpfxjyftd Ej Aa Ueld

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 780 mm, 1 used, very well-maintained High-precision CNC jig boring machine SIP MP 600 Machine year: 1995 – Retrofit in 2007 with HEIDENHAIN Bljdju Titzepfx Aa Ued iTNC 530 and complete geometric overhaul. Table: 1100 x 700 mm – clear passage between columns: 750 mm Hydrostatic spindle diameter: 130 mm – 1/1,100 micron runout Retrofit to HEIDENHAIN CNC, 3-axis interpolation. Readout accuracy of the boring spindle under 1 micron – hydraulic weight and load compensation in the crossbeam. Fantastically preserved machine, which we are happy to demonstrate under power at our warehouse. Price (Domestic, plus 19% VAT) ex stock Delivery time: immediate – subject to prior sale and errors. Payment: as customary in trade, net in advance before collection. Technical data non-binding – subject to change and errors.

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Blsdpfxox T Ddyj Aa Uod Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2020, machine/vehicle number: 958-168, Operating hours: approx. 6,000, currently not in operation, print heads have been preserved, application version: 6.9.3.9, PLC version: 20200618.957, includes control PC, flat screen monitor, hand scanner, keyboard, and mouse. Bedpoyidl Sofx Aa Ueld

Condition: repair required (used), Year of construction: 2012, functionality: not functional, The battery needs to be replaced. Blsdoyn I Tyspfx Aa Uod