Used Prepress for sale (70)

Year of construction: 2026, condition: new, original Screen laser diodes 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM (64 channel) new & second-hand Pjdpfedmdvvjx Acvspp All offers subject to prior sale

Year of construction: 2026, condition: new, U1254024-01 Trailing Edge Clamp Unit, "new" (Screen PT-R4xxx & OEM) PlateRite 4xxx, Luxel T6xxx, Acento, Avalon N4, Topsetter 74/P S100096323V02 orig. Tail Clamp 8RE Set, "new" (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF S100096323V02 orig. Tail Clamp 8RE Set (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF "refurbished" with orig. Screen parts All other clamp sets on request Pedpfob Uptijx Acvepp All offers are subject to prior sale

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Ppedpfx Asyuztgecvep Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: good (used), functionality: fully functional, PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor, Heidelberg Suprasetter A105/74/105 Classic second-hand, tested Podsyitl Dopfx Acvjpp All offers are subject to prior sale

Condition: good (used), S151347 AC Servo Pack PT-R8xxx (SGDB-20AD-Y193) Ppsdpfx Acoyitc Aovjp second-hand, tested All offers are subject to prior sale

Condition: good (used), PL.572.3100-01 Schneider Servo CTP Controller for M10 Drive Motor second-hand for Suprasetter A-models (GEN II) Ppjdpfx Acjyitbxsvep All offers are subject to prior sale

Year of construction: 2009, condition: good (used), PL.551.1000 Termotek Chiller for Heidelberg Suprasetter 105, cpl. second-hand, tested Ppodpfeyir Udex Acvjp All offers are subject to prior sale

Condition: refurbished (used), mirror motors 633/750 Hz. for Heidelberg Prosetter 52/74/102 fully tested mirror motors 633 Hz. for Heidelberg Primesetter /74/102 fully tested Ppedpfx Aspguawecvop mirror motors for Linotype-Hell/Heidelberg Herkules/Pro/Basic/Elite fully tested All offers subject to prior sale

Condition: good (used), Year of construction: 2014, functionality: fully functional, Laser Moduls for Heidelberg Suprasetter, second hand, tested 6 x GEN II, class 160 mW, 64 diodes, 2.540 dpi with various exposing hours prices and further information on request Ppjdpfx Aed Aq U Ujcvep

Year of construction: 2007, condition: good (used), functionality: fully functional, We are offering pressing line for rapeseed/sunflower with prepress (FS1000 55kw), final press (FS1000 45kw) and full automatic filtration for oil, 10m2. It is made for double cold pressing, which is low energy consuming and completely natural, providing the oil without necessity for degumming, because phosphorus content is low. After that full automatic filtration will remove cake residues from oil, which can be safely stored without any damage. Pjdexuafyjpfx Acvjpp Capacity of the line 1.400kg/h, 32t/24h

Condition: used, Year of construction: 2022, Year: 2022 Condition: verry good Straight 2 Cut - SW for data processing - The processing takes place directly in the high speed cutter. The prepress data is scanned via barcode and converted into cutting programs directly on the cutter. Straight 2 Cut consists of the following 4 modules: - CutTronic – pre-press data is automatically converted into a cutting program - Hotfolder – fast and easy connection of the machine to the network - Barcode-reader – direct opening of the order file without searching - Graphic process visualization directly on the display Technical specification: - cutting width - 1320 mm - loading depth - 1320 mm - maximum press gap - 165 mm - minimum cut without cover plate/with cover plate - 20/77 mm - carriage speed - 300 mm/s - pressing force - 2.5-45 kN - safe pressing force - 300 N - main motor power - 4 kW - table height - 870 mm - dimensions (W x H x D) - 2470 x 1660 x 3430 mm - machine weight - 3410 kg Configuration: - BP 132 - stack cutter width 132 cm - Side air tables perforated 750 x 1000 mm - 4x HSS knife - Set of scoring bars - SW - S2C Software for automatic generation of cutting programs Pjdpfx Asx Ew Trscvepp

Condition: good (used), functionality: fully functional, Year of construction: 2007, ADVAND Grafoteam PST26 plate stacker, 2007 cleaned and tested Ppodeu Hl Hhjpfx Acvsp All offers subject to prior sale

Condition: excellent (used), Year of construction: 2010, operating hours: 5,151 h, functionality: fully functional, machine/vehicle number: 343.089, empty load weight: 800 kg, We offer a machine in very good condition, Degraf Concept 201c, year of manufacture 2010. The machine has very low usage—only 5,151 exposures. Complete cabling and piping included. Full documentation available. Everything is operational, ready for use. Integrated all-in-one system for label printing houses and more. It has only been used for the needs of one print shop. For any questions or additional information, please send a message or contact us by phone. Psdeyrr Uijpfx Acvjpp

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 360-6988C, total length: 5,800 mm, total width: 1,140 mm, total height: 1,270 mm, input voltage: 380 V, type of input current: three-phase, infeed width: 890 mm, product height (max.): 830 mm, input frequency: 50 Hz, We are offering this used HIX dryer CUSTOM NP-3619 CE exposure unit, year of manufacture 2006. Power: 27.2 kW Current at 415 V: 40 A Current at 380 V: 37 A Voltage range: 380–415 V Ppsdpfox Upvwjx Acvsp Frequency: 50/60 Hz Number of conductors: 5 Phase/neutral voltage: 220–240 V Serial number: 360-6988C If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? Ppodsvgrh Uepfx Acvsp We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: like new (used), Year of construction: 2022, For sale: EXILE prepress system – complete set: CTS imaging unit and UV LED exposure cabinet. Devices from mid-2022. Printhead replaced in 2025. After that, used very little. 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serial number: 900 100523/182 Ppjdpfx Acexb Ru Eevop • Production date: 07/2022 • Version: DTS 30″ • Pin registration: MHM • Included: 1× Screen Drum • New printhead: 2025 2. Exposure cabinet – EXILE V LUX UV LED Exposure Cabinet • Serial number: 450 • Production date: . RIP software • SCREENMAKER RIP Kit (for Windows systems)

Condition: good (used), Nearly all SCREEN, FUJI, AGFA, HEIDELBERG CTP Spareparts second hand, tested or new All offers are subject to prior sale Psdpfx Aodpxbgocvjpp

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Ppodpfxovf E Avo Acvep Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2011, Heidelberg Suprasetter 105 /SCL - 3 lasers, 2540 dpi–5080 dpi - Laser on time: 9818 hours - Bacher punching unit - 1 Bit Metashooter installed on Dell PC Ppjdpfxex Uq Alo Acvep - Full maintenance contract with Heidelberg - Very good condition - Advand Stacker

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidelberg Suprasetter A74/52 Automatic plate loader (100 plates) Year of manufacture: 2007 Laser hours: 3,587 Exposed plates: 79,573 Max plate size: 676 x 760 mm Ppodpfxjx Upc Rs Acvsp Bacher punching system Excellent condition Stacker advand 26

Condition: excellent (used), Year of construction: 2011, Screen PT-R 4300E Year of manufacture: 2011 Ppodpfx Asx T Tftscvep SCL automatic plate loading Plates imaged: 114,000 Fuji 1-Bit Tiffbox Good condition.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Ppedpfx Ajxa Hy Ujcvop Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: used, Year of construction: 2004, Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP plate exposer - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates Pedpfewv D T Tsx Acvopp - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output capacity: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Robust construction for prepress department

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) Podpjwv Eazjfx Acvspp • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale: Beil M-B-HD-XL105 CTP plate bender. Year of manufacture: 2018 Type number: 52200042 Serial number: 31269 Ppsdpfjuhlk Tsx Acvjp Additional Information: • Sold directly by the seller • Viewing and testing available on-site • Consultations with our technician can be arranged • Currently located in Kaunas, Lithuania • Terms: EXW