Imagesetter

Heidelberg 105

Condition: used, Year of construction: 2011, Format: 930 x 1140 mm Equipment: Gsdpfsx U Dnhjx Ag Eott Thermal-CTP 2 laser heads Gen II, ( with 64 Laserdiodes) Class 160 Resolution: 2540 dpi, SCL Single Cassette Loader Productivity option = 21 plates/h.

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s Gtodpfet D E Aiox Ag Eet General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm Gtedpfjx R Tiaox Ag Est - Screw compressor Varimatrix 105-CS Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Year of construction: 2006, condition: good (used), machine/vehicle number: PL001240 , Thermal CTP (Computer to Plate) Throughput option (plates/h in max. format) : 14 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1140 mm Gtedpsfmmyzefx Ag Ejt Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Gtjdpfx Astq Ha Tsg Ejt

Condition: excellent (used), PJ.187.100 Chiller Unit cpl. for Suprasetter A52/74/75/105 Gjdpfegzbwmox Ag Estt second-hand, tested All offers are subject to prior sale

Condition: good (used), Year of construction: 1990, OFFSET PRINTING MACHINE HEIDELBERG SM72-2 1990 Gtodpfx Agox Rhkxj Ejt

Condition: used, Schneidmaschine / Gullotine Wohlenberg 92 MCS-2 TV Baujahr / Year 1989 - Serial-No. 3277-029 Schnittbreite / Cutting width max. 920mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Godpfx Agjwgxbye Estt

Condition: good (used), Year of construction: 2006, only approx. 110 million impressions, CP 2000, Axis Control, Alcolor Vario, Preset streamfeeder, air-cooled ink temperature control, program-controlled washing units, coating unit with chamber doctor blade system, powder device Weko AP 262, air supply AirStar Pro air-cooled, perfecting 1/4 or straight printing 5/0 Gtedpfx Aox R Sl Teg Eot

Condition: good (used), Year of construction: 2006, only approx. 145 million impressions Perfecting 2/3 or straight printing 5/0 Godpfxsx R Snhe Ag Eott Prinect AxisControl, CP 2000, Alcolor Vario, Preset feeder, Ink unit temperature control, Ink unit washing device, Blanket and impression cylinder washing device, Technotrans CombiStar CAN (air-cooled), Extended delivery, 2 modules (X2), DryStar 2000 air-cooled, PowderStar AP 232 powder sprayer, Chamber doctor blade system (coating unit), Anilox roller, StaticStar Compact antistatic device, RSP inline finishing system, Air supply via AirStar, air-cooled