Used Pre Shredders for sale (13,168)

Condition: ready for operation (used), Hopper opening approx. 600 x 800 mm Rotor diameter 252 mm Motor 18.5 kW Extraction port 160 mm Further technical data available upon request Delta knives Bjdpfxjylv I He Aa Uecw External dimensions (L x W x H) approx. 1750 x 1300 x 1700 mm Machine requires repair: some knife holders are broken off All information provided without guarantee Specifications taken from a brochure

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz. Bsdpex Anq Hofx Aa Uocw

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Bcjdpfx Aajynzg He Usw Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: used, Industrial shredder chopper This industrial shredder / bead chopper is a simple, robust, and versatile solution designed for the efficient volume reduction of your metallic waste, such as: - Metal scraps - Continuous welding beads - Other compatible metallic waste for industrial recycling. Its power allows it to shred, chop, and fragment various types of industrial waste, facilitating their compaction, waste management, and preparation for industrial recycling. SPECIFICATIONS Shredding: Designed to handle constant flows of metallic waste, optimizing your recovery and recycling operations. Blade access opening: A wide opening of 402 x 502 mm to facilitate the feeding of various materials. Blade configuration: Equipped with 1 blade shaft of 25 mm width, designed for effective and uniform chopping. Shaft rotational speed: Operates at 35 r.p.m., offering an optimal balance between shredding power and efficiency. Voltage: Prepared for standard 400/50 Volt/Hz connections. Weight: At 500 kg, this is a solid and durable machine, built for intensive industrial use. Blade access opening: 402 x 502 mm Number of blade shafts: 1 unit Blade width: 25 mm Shaft rotational speed: 35 r.p.m. Voltage: 400/50 Volt/Hz Bjdpjymaiqefx Aa Ujcw Weight: 500 kg

Condition: used, Year of construction: 2016, operating hours: 816 h, 2016 | Dücker HM 160 Wood Chipper | Used Shredder | 816 hours Bedpfxeydr A Rs Aa Ujcw 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39536 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), CATALOG NUMBER 7610 Technical data: - Inlet width: 410mm Bedpfx Aeyk Hifoa Uscw - Inlet height: 140mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 80x130mm - Top: single driven, toothed shaft - Bottom: 2 driven, toothed shafts - Infeed belt length: 2850mm - Infeed belt width: 390mm - Autoreverse - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4800x1550x1200mm - Weight: approx. 2200kg ADVANTAGES – Manufactured in Poland – Autoreverse – Equipped with conveyor – DTR technical documentation – Used chipper, very good condition Net price: 75,900 PLN Net price: 18,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt Bcedpfoyk Hhuex Aa Uow - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm Bjdpfxoyk Hgqe Aa Uocw - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6943 Bcjdpfx Aasyk Hfyo Uew TECHNICAL DATA - Feed hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main motor: 45kW - Pump motor: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen: 59mm - Pusher drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approx. 9000kg ADVANTAGES – French manufacture - New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - Infeed width: 740mm - Infeed height: 300mm - Shaft width: 780mm - Shaft diameter: 1000mm - Knife length: 780mm - Number of knives: 2 pcs - Screen dimensions: 55x55mm - Bottom: 4 toothed feed rollers - Lower shaft motor: 5.5kW - Top: 3 toothed feed rollers - Upper shaft motor: 5.5kW - Belt conveyor feeder - Length of belt feeder: 4300mm Bedpfxeyk Hfaj Aa Uecw - Width of belt feeder: 600mm - Feeder belt drive motor: 2.2kW - Main motor: 90kW - Reverse - Autoreverse - Overall machine dimensions (L/W/H): 4600x2350x1700mm - Overall feeder dimensions (L/W/H): 4550x980x970mm - Total weight: approx. 11,000kg – German-made – Autoreverse (adjustable) – Used shredder, in very good condition Net price: 265,900 PLN Net price: 63,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major currency fluctuations, the price may change)

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Type: DTVA 2050-36 Constr. year: 1997 diameter range: max 18 mm Bedjwxdkqspfx Aa Uscw feeding speed: max 15 m/m capstan diameter: 900 mm output: 20 HP Location: In our warehouse

Condition: used, Technical details: drive motor: 4 kW revolution per minute: 14 U/min voltage: 380 V / Hz weight: ca. 0,5 t Chip Crusher - Shredder 2-shaft crusher current feed size 400 x 360mm crushing tools 8 pieces per shaft current drop-out size L: 350 x W: 250mm Bcodpsu Nxrpefx Aa Ujw gear motor manufacturer Vector accessories: 2 crusher discs *

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Bsdpfod Hkqhox Aa Ujcw Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net Bcjded E R D Sspfx Aa Uew - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, Bcododwktkepfx Aa Usw + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Standard scope of delivery includes: - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Bcedpfx Aox Af Rdsa Uew Raw material requirements: - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS-F 125 Forestry Mulcher / incl. rotary actuator / NEW / in stock & available immediately Price: €28,390.00 net / €33,784.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulcher attachment for excavator mounting, suitable for mulching along riverbanks, in forests, next to railway tracks, and other hard-to-reach areas - Mulches bushes and wood up to 20 cm diameter - Suitable for excavators from 10-20 tons - Compatible with various mounting plates - Drive designed for hydraulic motor depending on carrier’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid shoes, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts) - 27 pieces, spare part number 176.02.005 OPT 465 M-BOOST Bent-axis piston motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood A separate hydraulic unit is recommended for operation. The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. The unit is supplied without hoses, couplings, and mounting plate. We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden (phone) is happy to assist you. We are happy to provide a financing offer upon request. We are official sales and service partner for Magni telehandlers, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Westtech, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! Bsdpfx Aaeyii T Is Ujcw Empty weight: 780 kg Please contact Marius Herden for further information...

Condition: new, For inquiries about the attachment, Mr. Herden will be pleased to assist you by phone. Seppi M. BMS 125 Forestry Mulcher / NEW / in stock & immediately available Price: €30,690.00 net / €36,521.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulching attachment for excavator mounting - Ideal machine for mulching in hard-to-access areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches brush and wood up to 30 cm Ø - For excavators from 13 to 30 t - For installation on various mounting plates - Drive designed for hydraulic motor, depending on carrier oil flow - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge across the entire hood length - Front and rear chain guards - Height-adjustable support skids in sandwich construction, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 - Wear-resistant tool holders - Replaceable rotor stub shafts OPT 465 M-BOOST angled-axis piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required oil flow: 80 - 170 l/min Three hydraulic lines required: supply, return, and drain. The unit is supplied without hoses, connectors, or mounting plate. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden will be pleased to assist you by phone. Financing quote available on request. We are official sales and service partner for DMS, Westtech, Gierking GMT, OilQuick, Weber MT, Holp, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Subject to errors and prior sale! = More Information = Please contact Marius Herden for more information. Bcedpfx Aoyii Tzea Uow

Condition: reconditioned (used), Year of construction: 2010, operating hours: 50,000 h, functionality: fully functional, machine/vehicle number: nicht bekannt, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 400 kW (543.85 HP), rotational speed (max.): 87 rpm, blade width: 87 mm, Slow-running, robust single-shaft shredder suitable for the pre-shredding of various materials without massive contaminants. Bcjdpfxoyit Ras Aa Uow Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, incl. Working opening: 1790 x 1750 mm Fill volume: approx. 4 m3 Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz: 87 rpm Number of rotor knives: 41 pcs Knife dimension, pointed knives: 87x87x38 mm Counter-knives below: 5 pcs Scraper comb above: 5 pcs Hydraulic feed: 11 kW Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Delivery time: immediately

Condition: new, These Items are unused and boxed in original Packaging. Bsdpfxjxv Dv Es Aa Uscw Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: excellent (used), Year of construction: 2020, Hacker slow-speed shredder with powerful 45 kW motor, ideal for cables, plastics, and pallets. Rotor width: 1000 mm, rotor diameter: 368 mm. Fitted with 56 large knives (40 x 40 mm). Motor: 45 kW. Can be purchased with or without discharge conveyor (with overbelt magnet). Bcjdpsykzy Ejfx Aa Uow

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Technical Data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of manufacture: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Hopper volume: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Material: Wood, cardboard, plastic Accessories: Hopper Note: The shredder is in good condition. It has been inspected and tested at our location in 28816 Stuhr. A video is available on our website or YouTube channel. Viewing, including powered demonstrations, is possible by prior arrangement at any time. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewing by appointment only. Sale is ex works with prepayment, without warranty or guarantee. Bjdpfxsx Uz N As Aa Uocw

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Bodpfx Asx Uz Npea Uocw Technical data: Manufacturer: Höcker Polytechnik Model: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: High-speed shredder shaft with counter comb Remarks: The machine is in fully functional condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or YouTube channel. Viewings can be arranged at any time by appointment. Upon request, we are also happy to carry out test runs with your own material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for the accuracy of this information or for any possible errors. Offers are subject to change, prior sale, and revocation at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 2012, operating hours: 7,340 h, Doppstadt DW 3060K Büffel - Year of manufacture: 2012 Bcodpfxjyhyuye Aa Uew - Operating hours: 7,340 - Engine: Mercedes Benz, 430 HP - Roller with 21 teeth - Crawler chassis - Remote control - Weight: 30,000 kg Machine is overhauled and immediately available.

Condition: used, Year of construction: 2017, Mono rotor shredder 800 series 2017 used, working blades and sieve in good condition, ready for use. including switch box. 30 kW, 40 mm sieve, other sizes in consultation, rotor length 800 mm, hopper dimensions 800 x 1200 x 950 mm Depth machine is immediately available and can be inspected. Bsdpfx Aswcp H Soa Uocw