Used Powder Gun for sale (2,320)

Condition: good (used), Model : YTRON-XC 215 Water/Liquid flow rate (l/h) : 26,000 ... 45.000 Powder capacity (kg/h) max. : 11,000 RPM (1/min) : 3.000 Drive power (kW) : 15.0 Single acting mechanical seal : no Kodpfxounlbgs Ag Uell Double acting mechanical seal : yes Liquid inlet : DN 50 Liquid outlet : DN 80 Powder inlet : DN 80 Standard dimensions approx. LxWxH (mm) : 1.020x770x1.090mm

Condition: good (used), Stainless steel powder mixer conical mixer mixer mixing machine Mixing capacity +/- 130 liters Motor power 3kW 73rpm (recently renewed) Fully mobile Manually operated butterfly valve (food grade) Cover with hatch protection See our other advertisements VMA Wekerom Klsdpfowyfu Tox Ag Usl

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. - Control for temperature regulation This machine is connected and ready for testing in our machine hall. Klsdpfx Aoqu R Naog Uel

Condition: used, Year of construction: 1997, rate of flow 34 l/min 28 : 1 Ksdpjd Ih R Hsfx Ag Ujll 7 bar

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total width: 2,600 mm, total length: 4,000 mm, 5 Pre-heating - WAGNER Powder Spray Booth Wagner - cleaning Wanzer S-PTG-004 Pre-heating - before spray booth - and after cleaning and Gel furnace built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Ask the drawing S-PTG-004 Kodpfx Asvy Ebheg Ujll built-in radiators, especially the dark radiators in the ovens. Preheating: Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Gel oven: Only infrared radiators from Excelitas Nobelight (formerly Heraeus Nobelight) 400 V, 15000 W, heated length = 2,900 mm with a quantity of 12 units are installed here. Additional heating by metal tube heaters is not used here. Alignment oven Only metal tube radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 1 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here. Curing oven 2 Only metal tubular radiators 230V, 2500W, heated length = 2700 mm (drawing 18Z3-35249 a) with a quantity of 38 pieces are installed here. Please find attached the drawing of the radiators (tubular heaters) There is no additional infrared radiation here.

Condition: new, As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our site in 47669 Wachtendonk, we turn your individual requirements into reality and produce your desired concept. Thanks to our in-house production for almost all components, we are flexible and can respond specifically to your requirements. We not only provide you with your ideal powder coating system - we are also on hand with comprehensive user expertise to support you in all matters relating to surface technology. Every item offered here is manufactured especially for you. Whether large or small projects - we supply complete systems from a single source, tailored to your requirements. Kjdpfxsuqygve Ag Uoll We look forward to hearing from you and implementing your ideas together! Here we offer: -lift/lowering stations for one or more rails (also available with end control lighting) -Manual or electric cross travel platforms -Combi-device cross travel platform with lifting/lowering function -Complete transport system incl. parking bays, goods carriers -Power and Free transport systems Manual or automatic, chain-driven rotation -Planning, design and assembly included Take your powder coating to the next level of efficiency - we support you with the ideal planning and implementation.

Condition: used, Powder coating line Includes: - Polyester-lined paint booth with 3x1m internal capacity - Equipped with an external door for painting - Inlet and outlet opening size for parts carousel: X - Side window opening size for painting: X - Drying oven 3x1m - Brand: SART - Model: HE - Power: 18,000W - Powder coating gun - Brand: X - Model: X - Carousel with roller carts for part transport (approx. 20 meters) - Cyclone for air and powder re-circulation (blue) - Powder filter with Telemecanique frequency inverter - Silent piston compressor (used) NUAIR + HERTZ dryer - Silent piston compressor, brand Nuair, model AIRSIL 2, 5.5hp, 270L tank, 640L/min, 952 hours of use, year 2020 - Air dryer, brand Hertz, model HRD 40, single phase 220V Klsdpfx Agjxgnpkj Uel *Installation dismantled and in storage at our premises. Sold as is.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps Klodpfxjx H Tads Ag Usl - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Year of construction: 2023, condition: new, Powder container with fluidization Powder container made of stainless steel / steel. Klsdpfx Agecr U Rrj Usl Universal connection to the pump FI20. Connection to the powder hose 8mm - quick coupling.

Year of construction: 2024, condition: new, functionality: fully functional, Convection baking oven Powder furnace new SLS - 90 / O * D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Kjdpfx Agecutrlj Uell Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Homogeneity < ± 3 ° C, if 180 ° C Max < ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Delivery time approximately 12 to 16 weeks after ordering Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta, Peinture en poudre, thermoplastique, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування gemapulverbeschichtungskabine Powder coating plant Powder coating plant Powder coating cabin for powder coating Surface technology Powder gun Powder guns Einbren

Year of construction: 2019, condition: new, The creation of a written offer / cost proposal for a powder coating system of the company Romer. Klsdpfx Asc Sd D Ssg Uol

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system - Negotiable !!! - Electrical data 100-240V 50-60Hz - Powder absorption up to 200g / min - Air consumption up to 250L / min at 6 bar - Air quality / vapor less than 1.3 g / nm3 - Air quality / oil less than 0.1 mg / nm3 Powder coating gun data - Output voltage 100 kV - max. output current 100 µA - Length of hose 6 m - antistatic hose - Polarization Negative - Conformity ATEX 2mJ Description of hose - Applicator for quick color changes directly from the box - Intuitive 7" touch display - Automatic cleaning function - gun rinsing - Up to 20 user-defined programs - 3 automatic programs - Remote control of the paint quantity and program change from the handpiece -- Equipment - Controller of the PSS series - ProfiJector RI-1 blunt powder injector - ProfiGun powder gun with quick coupling and remote control - One set of hoses - Stand with vibrator and suction unit with fluidization PSS driver - 7-inch touch panel that can be operated with a glove - 3 automatic programs (overpainting, hard-to-reach surfaces, flat surfaces) - Graduation in 0.1kV and 0.1uA steps - Advanced pneumatic valves for air dose control (romer - patent pending) - The actual air flow measurement reacts to errors such as pressure loss or blockage of the system - Advanced diagnostic tools - Ability to name programs - Ability to control external master controllers with ModBus protocol (A-Series) ProfiGun PM-1 gun - A lightweight ergonomic gun, perfectly balanced with a contoured handle - The ceramic cascade with a voltage of up to 100,000V efficiently loads all types of powders - The new generation of nozzles ensures perfect powder penetration into complex shapes - The profiled nut provides a good grip - The conductive handle with high carbon content provides excellent grounding for the painter - The spray gun is made of special materials with increased impact resistance - Fully demountable design with replaceable powder path tube - The spray gun is patented in the USA and the EU - Cascade polarity - negative ProfiJector powder coating pump Description of the pump - Design of a new efficient injector - The most effective feed angle proven by research - Saves paint and air compared to right angle injectors - It is characterized by relatively low operating costs compared to other pumps - The injector is covered by a European patent Kedpfxog U I Ugj Ag Uoll

Year of construction: 2023, condition: new, A typical coating plant consists of surface pre-treatment (cleaning and / or application of a conversion coating), Intermediate drying, electrostatic coating zone ( booth / powder handling system ) and dryer ( egg oven ). The workpieces are transported through a conveyor system. Our company ROMER® plans, manufactures and assembles complete powder coating lines. Our plants can be visited and tested in Huerth near Cologne. Klsdpfxjcv Nl Rj Ag Uol Let us make you an offer for a plant tailored to your application.

Year of construction: 2007, condition: ready for operation (used), KAESER BB 88 C TURNING PISTON BLOWER, PVC POWDER FEEDER Unit: BB 88 C. Klodpfxjqafbzo Ag Uel Year of construction: 2007 Pumping speed: 5.07 m³ / min. Final pressure (abs): 1.01 bar Maximum pressure difference: 500 / mbar Rated motor power: 7.5 KW Block speed: 4,270 rpm Condition: very good Hablamos español Nous parlons français We speak English

Year of construction: 2015, condition: like new (used), Servo-motorised 3G-X-forceps / modular welding gun for robots was mounted on KUKA robots - the adaptation to such is included Electrode force max. 6kN at 500mm radius X-tongs for Cu-arms with diameter 54mm MF transformer 560V / 1kHz, 56kVA Ratio 1:70 - U20, 7.2V with measuring coil 150 mV / kA and thermal switch Servomotor 8-pole 300V - 20kN maximum power Kedpfxjd Eaz Tj Ag Usll Working stroke 95mm + 10mm reserve PDIV display Resolver 8-pin Spindle pitch 5mm Electrode arm for 3G pliers, projection approx. 400mm with brake (24VDC 1A) as required for KUKA robot Long 90 ° L console complete tube package including control and cooling tubes enclosed

Condition: excellent (used), air-operated, water-cooled spot welding gun for industrial Klsdpjgibv Eofx Ag Uol industrial use Type DALEX 3427 D rated power at 50 % ED: 35 kVA Sec. short-circuit current: 20.5 kA Electrode force: 580 daN with double stroke cylinder - long stroke 62 mm - pre-stroke 40 mm working stroke with stroke adjustment 0-22 mm with cardan suspension and suspension bracket 10 m connection cable and control cable electrode arms 350 mm arm distance 170 mm with synchronous welding control 15036

Condition: excellent (used), water-cooled, manually operated DALEX spot welding pliers Type 3218 Nominal power at 50 % duty cycle: 16 kVA Sec. short-circuit current: 13.5 kA Electrode force: 270 daN with cardan suspension and suspension bracket 1 pair of electrode arms 170 mm projection to that: DALEX RS 12 synchronous welding controller Kedpfx Agof Hi A Es Usll Power control by phase control Current time 1-99 Per synchronous with connection cable and 32 A CE plug and main switch

Condition: excellent (used), High performance spot welding gun with double stroke cylinder Make DALEX Type 3528 - 4 Rated power at 50 % ED: 63 kVA Kodpfx Aski Tkpog Usll Sec. short-circuit current: 31 kA Electrode force: 60-730 daN Double stroke cylinder Long stroke 62 mm Pre-stroke 40 mm working stroke with stroke adjustment 0-22 mm with 5/2-way solenoid valve Cardan suspension and suspension bracket 10 m connection cable with control line arm reach; 170 mm' arm distance: 170 mm cpl. with 1 pair of electrode arms, top and bottom straight, 170 mm Synchronous welding control MPS 1036 Example photo

Condition: new, Year of construction: 2025, Power rating at 50%: 2,5kVA Short-circuit current: 8,2kA Electrode force: 120daN (at 125mm Throat depth) weight: 11kg --- Klodpfxoxl Uqxs Ag Ujl with Electrode arm 125mm --- welding control --- warranty: 12 months

Condition: used, Year of construction: 2001, machine/vehicle number: 20010329, Offer 17500 Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm Kjdpfsv Eak Isx Ag Uell - Arm distance approx. 200 mm - Arm diameter approx. 50 mm - Double stroke cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm distance approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Condition: new, Year of construction: 2024, Powder coating oven Working dimensions (mm): 1500 (w) x 3000 (d) x 1800 (h) Technical data: • Power consumption: 46 kW. •Temperature max 230C Equipment: • Top transport • Control panel with adjustable time and temperature • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Ksdegui T Ujpfx Ag Uoll Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Powder coating oven The oven is designed for drying elements painted with water-based and solvent-based varnishes. Working dimensions (mm): 1500 (w) x 4000 (d) x 2000 (h) Technical data: • Power consumption: 59 kW. Equipment: • Top transport, • Touch control panel, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the workpiece heating process), • Locks for safe opening and closing, • Time module, • Thermoregulator (controls the temperature inside and maintains it at an appropriate level), • The oven is equipped with rails for easy transport. • Maximum working temperature: 230°C. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. Kljdpfx Ageg Ib Eps Usl We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Powder coating furnace Working dimensions (mm): 1200 (w) x 1500 (d) x 1800 (h) Nwrin Technical data: • Power consumption: 20 kW. • Maximum operating temperature: 230 ° C Equipment: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. Klsdpfx Agjhg Ty Io Uel We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: used, Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Speed: Mixer speed: 5,6 rpm Content: 75 liters Driving force: 0.25kW. - Mixer drive 0.25 kW Dimensions: Length 800mm x Width 700mm x Height 1200mm Empty weight: 100 kg Technical doc.: No Message: Mixing drive 0,25 kW, speed 5,6 rpm Klodpsiv Ic Eefx Ag Usl Condition: Used Price: On demand

Year of construction: 2008, condition: ready for operation (used), A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible. Klsdpfxowr Dv Hs Ag Ujl