Used Powder Gun for sale (2,555)

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included Gedpjwuqfyjfx Acmskd In excellent working condition

Year of construction: 2013, condition: good (used), Crossover / Platform / Staircase, Günzburger – used – Ex-works price: only €1,795 (net), dismantled, packed and loaded! Manufacturer: Günzburger Steigtechnik GmbH Type: unknown Year of manufacture: 2013 Permissible load: 200 kg Platform / crossover height: approx. 1.25 m Platform dimensions: approx. L: 80 cm, W: 80 cm step width Gsdewxv Eyspfx Acmjkd Total width: approx. 86 cm Steps: width approx. 80 cm Railing height: approx. 1.12 m Total height (with railing): approx. 2.35 m 2 x 6 steps Railing on both sides Original price: over €3,000 (net) Condition: good Available: immediately Location: Frankenberg warehouse

Condition: like new (used), Year of construction: 1995, functionality: fully functional, overall weight: 7,000 kg, space requirement height: 2,500 mm, space requirement length: 14,800 mm, space requirement width: 2,200 mm, Large stainless steel containers: dimensions: 14.80 x 2.20 x 2.50 m; weight: approx. 7,000 kg. The container was used for steaming tree trunks. The tank can also be used as a rainwater retention basin or fire-fighting water reservoir, and it is also suitable for private use in gardens for rainwater collection or even as a pool. Gkedpfx Acsxc Hvujmjd

Condition: ready for operation (used), Axial Fan Condenser Water Cooler Pressure tested, ready to use. Located Locally in: Hungary (EU) Gedpfx Aszhg Alecmokd

Condition: ready for operation (used), Axial Fan Condenser Water Cooler Pressure tested, ready to use. Located locally in: Hungary (EU) Gkedpfozhg Izsx Acmjd

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Godpfx Acet Ul Exsmjkd

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H101-000-000, conveyor belt width: 1,420 mm, conveyor belt speed: 1,700 mm/s, total width: 1,420 mm, power: 4 kW (5.44 HP), axle spacing: 2,450 mm, construction width: 1,420 mm, Center distance: 2,450 mm Belt width: 1,200 mm Overall width: 1,420 mm Cheek height: 310 mm Conveyor speed: 1.7 m/s Gkodpfx Acsu S Adremed Belt quality: EP 400/3 3:1.5 mm normal quality Profiling: Steep conveyor belt, PB 900 mm / PH 32 mm Drive: Van der Graaf drum motor Power: 4.0 kW Motor protection class/efficiency class IP 55 / IE3 Drive drum: Ø 215 mm (drum motor) Rubber coating: Metallic surface Idler drum: Ø 190 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø50 mm Support rollers: Ø 63.5 mm fitted with buffer rings Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm / support ring Ø 108 mm Side guide rollers: Ø 50 mm Clamping station: M16 threaded spindle

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: GACA FP071.1H_27 -FN and GACA FP 071.1H_37 FN, overall weight: 443 kg, total length: 4,820 mm, total height: 970 mm, total width: 865 mm, lamellar spacing: 7 mm, volume flow: 39,600 m³/h, cooling capacity: 27 kW (36.71 HP), operating pressure: 16 bar, Use glycol coolers . Worked in logistic vegetable and fruits wharehouse. Also is possible use area heating as convectors using hot-warm glycol received from refrigeration system. 3 fans cooler have 27kW capacity glycol in -5C out-2C. 2fans cooler have 22.7kW capacity with glycol in -5C out -2C Selling 4pcs coolers with 3 fans and 5pcs coolers with 2 fans Gkedpfx Aezk D Rljcmsd

Year of construction: 2019, condition: used, KOLBUS EVA-HOTMELT SPINE GLUING UNIT Year: 2019 Configuration: - With rollers - With level control - Godpfj Ahgfcex Acmokd Technical specifications: Compatible with: KOLBUS KM 600 perfect binder Suitable for: EVA hotmelt glue

Condition: used, Year of construction: 1997, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 96108, total length: 3,000 mm, total width: 2,500 mm, total height: 2,800 mm, overall weight: 3,000 kg, water consumption per time unit: 10 l/min, inner diameter: 1,400 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 5 bar, reception height: 1,000 mm, input current: 50 A, injection pressure: 4 bar, temperature: 50 °C, heating capacity: 30 kW (40.79 HP), power: 37 kW (50.31 HP), load capacity: 80 kg, operating pressure: 4 bar, empty load weight: 2,000 kg, Equipment: documentation/manual, Offered for sale is a spray cleaning system with an aqueous cleaner, featuring a two-stage spray cleaning process with a spray pressure of 4 bar. The basket is rotated or pivoted. Basket dimensions: L x W x H 815 x 565 x 525 mm. Throughput: approximately 4 baskets/hour. Fluid capacities: Washing 350 liters / Rinsing 250 liters. Heating capacity: Washing 18 kW, Rinsing 12 kW. Program sequence controlled by a PLC. Exhaust air for fume extraction: approximately 500 m3/h. Accessories: 240 liters of liquid cleaner + 30 liters of rust protection. Gksdpfs Ah Hl Uex Acmed

Condition: new, length in total / mm band width / mm conveying height / mm Control / Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. Gjdpfx Acsymf Hnjmokd - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: ready for operation (used), Siemens C79451-A3247-B71 power supply C4 051722, used, 100% functional Gedpfx Ajzzhncecmokd

Condition: ready for operation (used), Bosch NT600 Power Supply. Power supply unit, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gsdpfxji D Uayo Acmskd

Condition: ready for operation (used), Bosch NT600 power supply. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Gedpfsi D Ua Djx Acmskd

Condition: ready for operation (used), Bosch VM 60-150 supply module, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately. Gkjdsi D Ug Uspfx Acmsd

Condition: new, Grundfos CM5-5A-R-I-V-A00V-F-A-A-N centrifugal pump, Viton version, unused, 100% functional, scope of delivery as shown in the photos. Gksdpfs Akaq Uox Acmod

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Gksdpfsip D Rzox Acmsd

Condition: used, Year of construction: 2014, Candle Filter System – Automatic, 3 Filters 2x Filter housings 30" x 3 FBFM33 1x Candle filter FBT013GNW25J 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping Gsdpfxj Ai Upxj Acmekd

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting Features: - 8 lashing points - Tilting loading area - Universally applicable, sideboards can be retrofitted Net: €2,092.44 / Gross: €2,490.00 Article number: MUL115331800.01 Technical data: • Brand: Martz • Model: UNILADER 330 C • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 330 x 184 x 0 cm • External dimensions (L x W x H): 490 x 245 x 87 cm • Permissible total weight: 1,500 kg • Tare weight: 340 kg • Payload: 1,160 kg • Chassis: Low loader (wheels beside the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes Gedpjx Tcfpsfx Acmekd • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Screen-printed wooden floor, non-slip and waterproof • Insertion option at all 4 corners for grid attachment, sideboard attachments or front panel extension • Stable eccentric locks for locking the loading area • Very low chassis for a low loading angle • Tilting loading area, with gas springs • Optional retrofitting of higher sideboards and a rear ramp • Very stable steel frame • 8 lashing points recessed in the frame profile on the side • Reversing assist • KNOTT inertia brake and parking brake • Very stable, bolted V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function, manual winch Equipment: - Loading angle 10.5° - Universally usable, sideboards can be retrofitted - 10x lashing points Net price: €6,302.52 / Gross price: €7,500.00 Article number: MUI335502100.01 Technical data: • Brand: Martz • Model: GT UNIVERSAL 500 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 507 x 210 x 0 cm • External dimensions (LxWxH): 663 x 221 x 94 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 902 kg • Payload: 2,598 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C Gkjdpozy Ak Nofx Acmsd • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Ability to attach sideboards, tarpaulin frames, sideboard extensions, or front wall extensions at all 4 corners • Vehicle is also designed for all options after purchase: enormous potential for retrofitting: sideboards, tarpaulins, etc. can be retrofitted at any time • Screen-printed wooden floor, non-slip and waterproof • Steel loading ramp, standing on a shaft, 120cm • Sturdy eccentric locking mechanisms on the rear ramp • Lifting aid for the loading ramp • Very low chassis for a low loading angle • Hydraulically tilting loading platform (10.5° loading angle) • Manual hydraulic pump • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous continuously welded crossmembers for high point loads • Manual winch with winch stand • 12x lashing points recessed in the frame profile (600dAN/kg), certified • Reverse assist • KNOTT overrun device and parking brake • Very stable V-drawbar, REINFORCED • 13-pole plug • Reversing lights • Large-format safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear position lights LED • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, Parabolic suspension Equipment: - Ramp - Folding side walls - Tilting loading platform Net price: €7,100.84 / Gross price: €8,450.00 Article number: VUX235522130.01 Technical data: • Brand: Variant • Model: 3552 UX • Vehicle type: High-sided trailer • Vehicle condition: New Gksdpfj Aichuex Acmjd • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 520 x 210 x 35 cm • External dimensions (LxWxH): 669 x 224 x 159 cm • Loading height of the floor: 63 cm • Permissible total weight: 3,500 kg • Unladen weight: 984 kg • Payload: 2,516 kg • Chassis: High-sided trailer (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Folding aluminum side walls • Side walls 35cm high • Hydraulically tilting loading platform (11° approach angle) • Welded side wall/frame construction made of sheet steel, hot-dip galvanized • Screen-printed wood floor 18mm, non-slip and waterproof • Frame completely hot-dip galvanized • Steel ramp standing on a shaft • Stable eccentric locking mechanisms • Support struts on the ramp • Lifting aid for the ramp • Very low chassis for a low approach angle • 8x lashing eyes mounted in the side frame (1000dAN/kg) • Parabolic axle from KNOTT • Reverse automatic • KNOTT inertia coupling and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel Gkodjg Ipp Aopfx Acmod As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Gedpfx Aszil R Recmskd Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2027, VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM The powder coating system is designed for powder coating applications with frequent color changes during the day. The equipment is on a wheeled stand for ease of operation. Powder coating is sucked directly from the powder box, which allows rapid color changes. The powder box is placed on the vibrating table, suction pipe fluidizes the powder coating in the box, ensuring effective mixing, and the powder coating is homogeneously sent to the gun through an injector placed on the suction pipe. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 55 Kg VG4 CONTROLLER AND MANUAL POWDER COATING GUN The VM manual powder coating gun is completely dismountable. The ergonomic gun handle design ensures ergonomic handling and does not tire the operator during coating application. The high voltage cascade has a long service life, its tightness prevents contact with dust and minimizes the risks in this area. The well-designed head assembly and nozzle ensure excellent polarization and homogeneous coating on surfaces during application. The electronic touch panel on the back of the gun provides ease of use during operation. The control unit is digital and allows precise adjustment of settings via the touch panel. TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Powder output (3,5 bar) 500 g/min Protection class : IP 54 Gkedpfovv N Tyex Acmsd Voltage cable length : 5 m Powder hose length : 5 m Gun weight (gross) : 450 g Operating temperature :-20-50 ° C Nozzle :Flat jet or Ø16-20-24mm deflectör

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 62,000 kg, coolant supply: 36 bar, workpiece weight (max.): 62,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The LAGUN CM 8 is a high-performance traveling column milling machine for the precise and economical machining of long, large, and complex workpieces. The flexible traveling column concept is ideally suited for machine and plant construction, job-order manufacturing, and demanding machining tasks with high requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Gkedpfx Acsm Tv D Aomsd Technical equipment: Control system: • 2 × HEIDENHAIN TNC 7 digital control Two separate operator stations – one at the front of the machine and one in the rear cabin area • 2 × HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Coolant supply: • Internal coolant supply (ICS), 36 bar Tool changer: • Automatic tool changer (ATC), 60-position Chip disposal: • Hinged belt chip conveyor Preparation: • Preparation for NC rotary table / 4th axis Machine enclosure: • Three-sided perimeter enclosure Accuracy: • Positioning accuracy: ± 0.040 mm • Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer for your machining requirements.