Used Posmill for sale (15)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,514 h, spindle speed (max.): 18,000 rpm, overall weight: 20,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis POSmill H800U was manufactured in 2021. It features an X-axis travel of 670 mm, Y-axis travel of 820 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H800U universal machining centre we have for sale. Contact us for further details. Hjdpfeznktujx Ab Eer - Coolant Supply: 40 bar- Nominal Power: 90 kVA- Input Voltage: 400 V, 50 Hz (3-Phase)- Full Load Current: 125 A- Max. Current Load: 200 A- Short-Circuit Strength: 25 kA- Included Equipment: Documentation/Manual, Chip Conveyor, Coolant System & Filtration Unit- Condition: Very good, fully functional; completely inspected by manufacturer at the end of 2025 (receipts available)- Spindle Hours: 11,514 h- Machine Power-On Hours: 20,954 h- Control Power-On Hours: 22,231 h- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 533 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, table width: 600 mm, table length: 1,200 mm, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill CE1000 was manufactured in 2023. It features an X-axis travel of 1,060 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill CE1000 vertical machining centre we have for sale. Contact us for further details. - Coolant Supply Through Spindle / High Pressure: 20 bar- Rated Power: 30 kVA- Voltage: 400 V (3-Phase, 50 Hz)- Full Load Current: 52 A- Max. Current Load: 250 A- Short-Circuit Resistance: 25 kA- Spindle Hours: 533 h- Power-on Hours Machine / Control: 2,410 h / 2,436 h- Tool Changer: 40-fold ISO 40- Internal Coolant Supply (IKZ): 20 bar with belt filter system- Equipment: Documentation/Manual, chip conveyor, external high-pressure coolant unit/tank with filtration, pneumatic maintenance unit, electronic handwheel- Condition: Very good, fully functional; checked in late 2025 with no defects found- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)- Measuring Systems: Heidenhain linear measuring system (X, Y, Z), Wireless Pick Up tool measuring system 35.40 TS, Workpiece measuring system 25.50-HDR Hodpfjznkrdsx Ab Esr Technical Specification Through-spindle Coolant Yes Taper Size ISO 40

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Posmill C 1050, Year of manufacture: 2014, Control system: Heidenhain iTNC 530, Hodpszqzgdefx Ab Esr Travel range X/Y/Z: 1050/530/630 mm, Table size: 1150 x 560 mm, Number of tool positions: 30, Tool holder: SK 40, Coolant pressure: 20 bar, Strip-type filter system, Chip conveyor, Machine has a total of 600 spindle hours.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 70 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC350, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis POSmill E1100 was manufactured in 2011. It features a Heidenhain iTNC350 CNC control, a robust 1,100 mm X-axis travel, and a high-capacity 40-position automatic tool changer. The spindle supports speeds up to 10,000 rpm with ISO 40 tool holder and cooling. Additional features include a full enclosure, safety windows, and a 20 bar coolant system with chip management. If you are looking to get high-quality milling capabilities consider the POSmill E1100 machine we have for sale. Contact us for more information. • Prepared for 4th axis (interface prepared; compatible with Lehmann rotary table) • Table approx. 1,300 × 600 mm • CNC control: direct linear scales X/Y/Z; electronic handwheel; tool breakage monitoring Hedpfsycuc Dsx Ab Eor • Spindle cooling; air blast through spindle • Tool system: ATC 40 positions; tool magazine with loading hatch; tool length measurement; tool clamping monitoring • Enclosure & safety: full machine enclosure; polycarbonate safety windows; automatic lubrication system; safety cabinet with air conditioning • Connectivity: USB interface; network connection • News spindle in 2020. New spindle has only 80 hours Additional equipment, not included • Chip conveyor • High-pressure coolant system, 20 bar with belt filter unit • Coolant flushing system • Hydraulic unit • Workpiece measuring system (25.0 HDR) • Pallet handling interface (optional) Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel Hodpfjyir Dxox Ab Ejr • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Additional equipment • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,862 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 96, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2023. It features an impressive X-axis travel of 670 mm, Y-axis travel of 830 mm, and Z-axis travel of 600 mm. The machine includes a table diameter of 800 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. • Control Unit: Heidenhain TNC 640 • NC Software: 340590 16 SP3 Hotfix4 • A-Axis Swivel Range: -120° to +120° • B-Axis Swivel Range: +110° / -110° • C-Axis Rotary Table: 360° Continuous Rotation • Table Diameter: 800 mm • Spindle Taper: HSK-A63 • Tool Holder: HSK-A63 • Air Through Spindle • Linear Measuring System: Heidenhain X, Y, Z • Rotary Measuring System: Heidenhain • Heidenhain DXF Import • Heidenhain OCM Option • Oil Cooling for 4th & 5th Axis • Spindle Cooler • Electrical Cabinet Air Cooling • Network Connection • USB Port • Collision Avoidance: POS DCM Collision Module • POS Kinematic Module incl. Reference Ball • Infrared Workpiece Measurement: 3D Probe • Tool Measurement: BLUM Laser • Workpiece Measurement Preparation • Rotary Viewing Window • Hinged Belt Chip Conveyor (Optional, Not Included) • Professional Chip Conveyor with 40 Bar Internal Coolant Supply • Coolant Pump (Head): M-Function Controlled • Coolant Flush Pump Hodpjzhu S Uofx Ab Eer • Hand Wash Gun • Water Gun • Chip Flush System • Single Compressed Air Connection in Table Centre • Hydraulic Unit • Mobile Electronic Handwheel • Rated Power: 90 kVA • Rated Current: 125 A • Maximum Current: 200 A • Short-Circuit Rating: 25 kA • Power Supply: 400 V / 50 Hz • Spindle S1 Time: 1,861 h 59 min 58 s • Single-Shift Operation Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Heidenhain TNC 640 control Air true spindel Spindel 10.000 RPM ISO40 Tool changer 40 tools ATC Belt filter with Internal coolant 20 bar Hexagon Touch probe Hexagon tool probe Chip conveyor Thermal spindel compensation Z-axis Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Hodpfsyindasx Ab Ejr Z-Axis Travel: 600 mm Machine is within new tolerence and geometry protocol is available.

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating hours: 15,950 h, POSmill E 1100 machining center ITNC 530 (2014) Manufacturer: POSmill Type: E 1100 machining center ITNC 530 Hsdpfx Aezgu Utob Eor Year of manufacture: 2014 Condition: used, good under power ready for demonstration, X-spindle NEW Switch-on hours approx. 43,559h Spindle hours approx. 15.789h Control ITNC 530 Travels POsmill E 1100 X-axis 1100 mm Y-axis 600 mm Z-axis 510 mm Rapid traverse up to 32 m/min Ball screw drives up to 50 mm Feed rate 1 - 10,000 mm/min. Tool holder ISO 40 Speed, max. 10,000 rpm Power, max. 25 kW Spindle/table distance 120-630 mm Table dimensions 1300 x 600 mm Distance floor/table approx. 855 mm Load, max. 1,000 kg Distance spindle/stand approx. 600 mm Number of tools 60 pcs. Tool length, max. 300 mm Tool weight, max. 8 kg Changing time from 5.5 s Weight 8,500 kg - Original documentation - 3D measuring probe - Belt filter system with IKZ 20 bar - Water gun - Air gun - Machine feet - Chip conveyor - HR 410 handwheel - Prepared for 4th & 5th axis Note: Without vices

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, controller manufacturer: HEIDENHAIN, controller model: 530, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill C 1050 was manufactured in 2014. It features a travel of 1050 x 530 mm and a spindle speed of 10,000 rpm, making it suitable for various machining tasks. The machine includes a paper belt filter and optional chip conveyor. If you are looking to get high-quality machining capabilities, consider the POSmill C 1050 vertical machining centre we have for sale. Machine currently not funcional. Contact us for further details. Defect: Heidenhain UE241 inverter defective Hedszfgpgspfx Ab Eer • Approx. 7,000 spindle hours • Paper Belt Filter • Chip Conveyor • Tool Taper: SK40 • Internal Cooling • Rated Power: 25 kVA • Fuse Protection: 35 A • Voltage: 400 V / 50 Hz / 3 PhMachine currently not funcional. Heidenhain UE241 inverter defectice. POS offer is available.

Condition: like new (used), Year of construction: 2024, operating hours: 1,223 h, power: 39 kW (53.03 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, number of slots in tool magazine: 60, total height: 3,000 mm, total length: 5,800 mm, total width: 4,300 mm, mount diameter: 40 mm, number of spindles: 1, power of the milling unit: 39,000 W, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, space requirement width: 4,300 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, POSmill E 1600 Hsdsvwlp Hspfx Ab Eor Control: Heidenhein iTNC 640 Travel X: 1600 mm Travel Y: 800 mm Travel Z: 800 mm Table size: 1700 x 800 mm SK 40 tool holder Tool positions: 40 Max. spindle speed: 10,000 Rapid traverse: 32 m/min Weight 13.5 t Operating hours only 1,223h Equipment: - Glass scales in all 3 axes - Hexagon 3D infrared touch system - Air through the spindle - IKZ 20 bar with band filter unit - Mobile electronic handwheel - Heidenhain iTNC 640 - Tool changer with 60 positions can be operated from the front The machine is in our production and is still in use. Delivery is possible at short notice by arrangement. Instruction on the machine, transport and commissioning are available for a separate charge. The machine has always been regularly serviced and is in very good, well-maintained condition. Sold without accessories such as clamping devices, chip containers, workbench and tools.

Condition: good (used), Year of construction: 2013, CNC Machining Center Posmill C 800 Kompakt Year of manufacture: 2013 Operating hours: Machine on: approx. 47,000 hrs Program run: approx. 5,700 hrs Spindle: approx. 4,800 hrs Spindle: SK40 Spindle speed: 10,000 rpm Tool changer: 24 positions Travel: X 800 / Y 520 / Z 550 mm Table size: 950 x 520 mm Control: Heidenhain iTNC 530 The spindle was replaced in 2022. + Through-spindle coolant (IKZ) + Hexagon probe Hsdpey D Uf Njfx Ab Ejr Sale WITHOUT NC clamps and tool holders! Dimensions (LxWxH): approx. 260 x 260 x 270 cm Weight: 6,800 kg

Condition: good (used), Year of construction: 2015, operating hours: 26,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, Equipment: chip conveyor, Posmill C 800 Kompakt Year of manufacture: 2015 Very well maintained condition! The machine was used exclusively for dry machining of plastics! Hjdpfey Ni U Nox Ab Esr + 4th / 5th axis Lehmann Edition 2 / 500 Kombiflex 4th axis swivels 360° 5th axis tilts 90° + Coolant tank and internal coolant supply (unused) TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 520 mm Travel Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24 positions Table size: 950 x 520 mm Control: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating hours Machine power-on hours: approx. 26,000 hrs Spindle: approx. 16,000 hrs Note: The clamp on the Lehmann rotary table is not included in the offer.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Hedpoy E Hqtsfx Ab Eor Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Hjdpox D Dx Aofx Ab Ejr Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, Posmill C1050 3-Axis Machining Center (2010) Manufacturer: POSmill Model: C1050 3-Axis Machining Center (2010) Year of manufacture: 2010 Machine type: 3-axis machining center Condition: Powered on, ready for immediate use Operating hours: approx. 29,800 h Spindle hours: approx. 9,000 h CNC Control: iTNC 530 Spindle speed: 10,000 rpm Tool magazine: 30 slots X-axis (mm): 1,050 Y-axis (mm): 530 Z-axis (mm): 630 Distance spindle/table (mm): 85-715 Accessories: Documentation Chip conveyor Coolant system Hedex Iv Hvspfx Ab Esr 30-position tool changer Linear scales on all axes X / Y / Z 3D probe Electronic handwheel Available immediately.