POSmill H 800 U

POSmill H 800 U

Condition: used, Year of construction: 2013, functionality: fully functional, POSmill H800U – 5-Axis CNC Machining Center Year of manufacture: 2013 Manufacturer: POSmill Model: H800U Machine number: 20130408 Hodpfx Akj Afz S Tsiow Control system: Heidenhain iTNC 530 Technical data - Travel range X-axis: 700 mm - Travel range Y-axis: 820 mm - Travel range Z-axis: 600 mm - Number of axes: 5 - NC rotary table: Ø 800 mm - A/C axes: Kessler torque drive - Swivel range A-axis: ±120° - Maximum spindle speed: 18,000 rpm - Tool holder: HSK-A63 - Tool magazine: 96 tool positions - Internal coolant (IKZ): 80 bar - Measuring systems: Direct absolute measuring systems in all axes, with air purge Equipment - Heidenhain handwheel HR 410 - Kessler A/C axes with torque drive - NC rotary table Ø 800 mm - Internal coolant 80 bar - Paper band filter system - Coolant gun - External cooling of the milling head via nozzle ring - Compressed air via nozzle ring and spindle center - Heidenhain 3D probe - BLUM laser for tool measurement - Automatic cabinet roof - Operating mode 4 - Signal light - Bed flushing - Coolant temperature control Operating hours - Control system switched on: 40,822 h - Machine switched on: 40,073 h - Program run: 20,017 h - Spindle S1: 17,354 h Condition / Notes The machine has two tool magazine chains with a total of 96 tool positions. One of the two magazine chains is defective. The further technical condition and functionality must be checked during an inspection. Inspection possible by arrangement. All information is without guarantee. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Hjdpozxf Hksfx Akijw Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 27,157 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,200 kg, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2015. It features a maximum spindle speed of 18,000 rpm and a table size of Ø 800 mm, with a maximum table load of 1,200 kg. The machine includes a 96-fold tool changer and advanced Heidenhain control unit. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. - Swivel Range: -120 to +120 degrees- Rotary Table: 360 degrees continuous- Spindle: Coolant Through Spindle (CTS / IKZ) 70 bar with belt filter unit- Table Size: Ø 800 mm (Kessler Table)- Tool Changer: 96-fold HSK-A 63- Linear Measuring System: Heidenhain XYZ with purge air- Switch Cabinet Cooler: Active Air-Air- Connected Load: 90 kVA- Full Load Current: 125 A- Max Current Load: 200 A- Voltage: 400 V, 50 Hz- Operating Hours Control On: 27,157 h (as of end 2025)- Operating Hours Program Run: 21,340 h (as of end 2025)- Additional Equipment: - Oil cooling for 4th and 5th axis, controlled - Regulated spindle cooler - Heidenhain Rotary Measuring System - Heidenhain Kinematics Module incl. Reference Sphere - External hinged belt chip conveyor - Coolant pump at head via M-functions - Chip flush device pump - Electromechanical oil/coolant separator - Automatic coolant level monitoring - Tool changer rear operation with display - Tool changer protective door - 3-fold hydraulic connection in table center - 1-fold air connection in table center - Coolant unit temperature control - Workpiece measurement preparation - Infrared workpiece measurement - 3D Touch Probe - Tool measurement via BLUM laser (Laser bridge) - Heidenhain DCM collision module- Automation System: FCS RP 400 Pallet Automation (Commissioned Early Sept 2018)- Pallet Positions: 12- Pallet Size: 400 x 400 mm- Max Transfer Weight: 500 kg Hedpfxoz Ixtme Akijw Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,514 h, spindle speed (max.): 18,000 rpm, overall weight: 20,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2021. It features an X-axis travel of 670 mm, Y-axis travel of 820 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U universal machining centre we have for sale. Contact us for further details. Hsdpsznktuefx Akisw - Coolant Supply: 40 bar- Nominal Power: 90 kVA- Input Voltage: 400 V, 50 Hz (3-Phase)- Full Load Current: 125 A- Max. Current Load: 200 A- Short-Circuit Strength: 25 kA- Included Equipment: Documentation/Manual, Chip Conveyor, Coolant System & Filtration Unit- Condition: Very good, fully functional; completely inspected by manufacturer at the end of 2025 (receipts available)- Spindle Hours: 11,514 h- Machine Power-On Hours: 20,954 h- Control Power-On Hours: 22,231 h- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 Hodpsuhbnnofx Akisw - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: excellent (used), Year of construction: 2019, 5-axis machining center POS POSMILL H 800 U Control: Heidenhain iTNC 530 Year of manufacture: 2019 Internal machine number: 40 ATTENTION: Machine has ONLY 500 spindle hours!!! Travel distances: Hodpfjyk Az Dox Akisw X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Table load: 1,200 kg Tool holder: HSK-63A Tool magazine: 96 positions Spindle speed: 18,000 rpm Equipment Rotary swivel table Rotating viewing window Glass scales in all axes Handheld control unit Heidenhain measuring probe Laser for tool breakage detection Rotary through-spindle in the table Air connection in the table incl. M-function Coolant system Internal cooling Chip conveyor Automatic roof Extraction system Documentation General data Repeatability/positioning accuracy upon new delivery 0.004 mm/0.008 mm (VDI/DGQ 3441) incl. tool holders with tools on the tool changer, (No suggestions), oil mist extraction IKZ (Internal Coolant System) Chip conveyor Rated power 90 kVA Full load current 125 A Max. current load 200 A 400 V 50 Hz

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, available for immediate delivery -Tmax 1350°C -Usable space LxWxH (mm) 600 x 500 x 500 Hsdpfx Akjzr U Anoiow -Batch weight 300 kg -Normal operating pressure 10⁻³ mbar -max. cooling gas pressure 6 bar abs. -External dimensions LxWxH (mm) 4200 x 2500 x 3500 -Space requirement LxWxH (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Included: -Protective gas buffer tank -Vacuum pump stand -4-flap design for cooling, allowing the flow direction of the gas flow to be adjusted horizontally or vertically. -Option for liquid nitrogen connection, enabling cooling to -80 °C inside the furnace. -Internal insulation made of graphite hard felt, protected and reinforced with CFC. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces.

Condition: as good as new (ex-display), Year of construction: 2025, CMS Taktika Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.100 mm Hsdpfx Ajwd Ichjkisw Max. Glas-height: 2.000 mm Min. Glas-length: 320 mm Min. Glas-height: 220 mm Thickness: 4-15 mm Options: - 2x groups of suction cups which 2 suction cups on each group - 2x Elektrospindle 6 kW 0-12.000 U/Min - Tool Magazin with 12 slots - Additional drilling from the backside - CAD/CAM - central lubrification

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm Hjdpfoiulkqex Akisw extra information Removable table

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, 24-position tool changer, Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probing system kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Hodpfoza Apaex Akiew Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Steel clamping bridge L/W 600/270 mm, Base plate steel, Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.