Vertical machining center

POSmill E 1100

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating hours: 15,950 h, POSmill E 1100 machining center ITNC 530 (2014) Manufacturer: POSmill Type: E 1100 machining center ITNC 530 Year of manufacture: 2014 Condition: used, good under power ready for demonstration, X-spindle NEW Switch-on hours approx. 43,559h Spindle hours approx. 15.789h Control ITNC 530 Travels POsmill E 1100 X-axis 1100 mm Y-axis 600 mm Z-axis 510 mm Rapid traverse up to 32 m/min Ball screw drives up to 50 mm Feed rate 1 - 10,000 mm/min. Tool holder ISO 40 Speed, max. 10,000 rpm Power, max. 25 kW Spindle/table distance 120-630 mm Table dimensions 1300 x 600 mm Distance floor/table approx. 855 mm Load, max. 1,000 kg Distance spindle/stand approx. 600 mm Number of tools 60 pcs. Gjdpoztwyrjfx Aciekb Tool length, max. 300 mm Tool weight, max. 8 kg Changing time from 5.5 s Weight 8,500 kg - Original documentation - 3D measuring probe - Belt filter system with IKZ 20 bar - Water gun - Air gun - Machine feet - Chip conveyor - HR 410 handwheel - Prepared for 4th & 5th axis Note: Without vices

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Gksdpfx Acjzl S Uzjijb Table diameter: 500 mm Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Chip conveyor Various tools Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 70 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC350, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis POSmill E1100 was manufactured in 2011. It features a Heidenhain iTNC350 CNC control, a robust 1,100 mm X-axis travel, and a high-capacity 40-position automatic tool changer. The spindle supports speeds up to 10,000 rpm with ISO 40 tool holder and cooling. Additional features include a full enclosure, safety windows, and a 20 bar coolant system with chip management. If you are looking to get high-quality milling capabilities consider the POSmill E1100 machine we have for sale. Contact us for more information. • Prepared for 4th axis (interface prepared; compatible with Lehmann rotary table) • Table approx. 1,300 × 600 mm • CNC control: direct linear scales X/Y/Z; electronic handwheel; tool breakage monitoring • Spindle cooling; air blast through spindle • Tool system: ATC 40 positions; tool magazine with loading hatch; tool length measurement; tool clamping monitoring • Enclosure & safety: full machine enclosure; polycarbonate safety windows; automatic lubrication system; safety cabinet with air conditioning • Connectivity: USB interface; network connection • News spindle in 2020. New spindle has only 80 hours Additional equipment, not included • Chip conveyor • High-pressure coolant system, 20 bar with belt filter unit • Coolant flushing system • Hydraulic unit • Workpiece measuring system (25.0 HDR) • Pallet handling interface (optional) Technical Specification Gksdjycuc Depfx Acieb Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment Gsdpfxex D Rvnj Aciekb • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No

Condition: like new (used), Year of construction: 2012, Parts shown by hand not come. With machine come tool holders SK 40. X 600 mm; Y 430 mm, Z 460 mm; A 150 deg x 0.001;C 360 deg x 0.001 12.000 rpm, Godpfelpcdwjx Acijkb Heidenhain iTNC 530 , 40 tool places in changer SK 40.

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) Gedsx D Di Uepfx Acijkb • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg Gsdpfx Aowtg Inocijkb

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 182823025, functionality: fully functional, operating hours: 2,417 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 650 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 400 kg, controller manufacturer: Heidehein, overall weight: 13,000 kg, controller model: TNC640, nominal power (apparent): 60 kVA, rapid traverse Z-axis: 1,417 m/min, rapid traverse X-axis: 1,417 m/min, rapid traverse Y-axis: 1,417 m/min, workpiece diameter (max.): 500 mm, operating hours of spindle: 2,417 h, Equipment: documentation/manual, Perfect running machine, 5 axle G6 Axile. Gsdpfjvumzxex Acijkb Can be shown in running condition.

Condition: good (used), Parts shown by hand not come. Gksdpfx Aoyb R Erscijb

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm Godpfex R Em Dsx Aciskb table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours