Used Polymer for sale (98)

Condition: used, functionality: fully functional, Polymer Laboratories PL-ELS 1000 Evaporative Light Scattering Detector. Laboratories is a completely new design of high sensitivity Evaporative Light Scattering (ELS) Detector for HPLC, microHPLC and GPC/SEC. This ELS detector has replaced the RI for the detection of solutes with no UV chromophore, giving enhanced performance with the benefits over an RI of improved sensitivity, excellent baseline stability, gradient compatability, and providing a positive response for all solute/solvent combinations. Features: -Small footprint for laboratory convenience -Improved sensitivity -Low dispersion -Excellent baseline stability -Wide gradient compatibility -Rapid equilibrium -Detection of even relatively volatile compounds -The PL-ELS 1000 from Polymer Good working condition. Please check out our other listings as well. Hodet Uk Dmjpfx Aagsnl

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Hnjdpexd D I Rsfx Aagol

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm Hjdpexlknmofx Aagjnl • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Year of construction: 1999, condition: used, We have two units available Name: Polymer dosing system for liquid Manufacturer: Reiflock Type: Reifomat 500 Year built: 1999 Performance: Polymer throughput: 0,12 - 2,5 l / min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Empty weight: Approx. 120 kg Technical doc.: yes Condition: Second hand Hodpoyvixbsfx Aagsnl Price: On demand

Year of construction: 1989, condition: ready for operation (used), Polymer storage tank Article no.: RE-HU-2019-0602-B38-e Product: Used polymer storage tank container Material: GF - UP / Leguval W 17 (glass fiber reinforced polyester resin with top layer) Manufacturer: Theodor Vanck GmbH Dimensions: diameter 2.40 x height 2.80m Hnsdpfx Aasd Hgc Usgel Volume: 12 m3 Year of construction: 1989 Fabr. No .: 55163

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops Hnodpfewv Eazox Aagsl • Condition: Very well maintained, immediately ready for operation

Year of construction: 2000, condition: used, Manufacturer: Tomal Type: PolyRex 3,0 Year built: 2000 Content: 2 x 1,5 m3 Conveying / dosing of: Powdered Polymer # Chamber: 2 Control: Yes Material: Stainless steel Model: Vertical Dimensions: L 1.900/1.050 x W 1.800/600 x H 2.200/2.200 mm Empty weight: 300 kg Technical doc.: Yes Condition: Second hand Price: By request Hjdpfxeyg E A Ae Aagjnl

Condition: used, Name: Dosing system for polymers Manufacturer: Alltech Type: Polymat 1000 V7 KD S Year built: 2003 Content: 1000 Liter Conveying / dosing of: Powdered # Chamber: 2 Control: Yes Driving force: 1: 0,55 kW, 12 0,55 kW Model: Horizontal Dimensions: Length 2000 x width 900 x height 1900 mm Hodpfx Aovt Sdpsagjnl Empty weight: 1000 kg Technical doc.: Yes Accessories: Dry material dispenser type T09K0007 Condition: Second hand Price: On demand

Year of construction: 1998, condition: used, Name: Dosing System For Polymers Hnsdpfx Aoxa Atqjagsl Manufacturer: PRO-ENTEC Type: RM2 Year built: 1998 Conveying / dosing of: Liquid polymer Performance: 2 - 30 L/h Control: Yes Dimensions: L 1.150 x W 600 x H 1.600 mm Empty weight: 100 kg Technical doc.: No Condition: Second hand Price: On demand

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Hsdpfxjibikws Aagonl Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Condition: excellent (used), Offer for a plate mounting machine with microdot cameras for label flexo presses, year 2015, 560 mm width, in excellent condition Hedpfx Aaoy Sfcbsgonl

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Hodpfxouvdzus Aagenl

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) Hedpfx Ajxna U Ueagsnl - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: used, Year of construction: 2007, For enquiries regarding the vehicle, Mr. Seidel (by phone) will be happy to assist you. Polyma LA0400185T68W Light Mast Trailer Rated output: 18 kVA, 14.4 kW / 26A, operating hours: 6,367 h We are happy to provide you with a leasing or financing offer upon request. Mr. Seidel (phone) is happy to assist you. Further information can be found on our homepage. ... Subject to errors, alterations, and prior sale !!! - Hsdpjyxadgsfx Aagjnl = Further information = Unladen weight: 1,660 kg Payload: 40 kg Gross vehicle weight: 1,700 kg Please contact Tobias Ebert for further information.

Condition: used, This listing is for a Heidolph Polymax 1040 Platform Shaker The unit is in full working condition and is ready for immediate release. The Heidolph Polymax 1040 Platform Shaker is expertly designed to deliver consistent and reliable shaking for a wide range of applications in laboratory settings. From gentle mixing to vigorous shaking, this platform shaker provides the perfect solution for your sample preparation needs. Key Features: - Customizable Speed Settings:Adjust the shaking speed from 2 to 50 RPM, allowing for precise control based on your specific requirements. - Temperature-Controlled Integration:The 1000 series device can be integrated into the incubation system, enabling temperature-controlled applications with the Polymax 1040 for optimal sample conditions. Hnsdpfxexxx S Hs Aagol - Large Platform:The spacious platform (40 x 40 cm) accommodates a variety of flask sizes and sample containers, making it versatile for different lab protocols. - Robust Design:Built with a sturdy frame and durable materials, ensuring long-lasting performance even in demanding environments. - Impressive Load Capacity:Designed to handle a load weight of up to 5 kg, accommodating all required samples on this platform wave shaker. - User-Friendly Interface:Intuitive digital display for easy monitoring of speed and time settings, enhancing convenience during operation. - Continuous or Timed Operation:Operate the device continuously or set a timer for up to 120 minutes, providing flexibility for various laboratory processes. - Safety First:Equipped with an overload protection feature that automatically shuts off the shaker if it becomes overloaded, preventing damage to both the shaker and your samples. - Applications:Cell Culture: Ideal for cultivating cells in flasks or plates with consistent agitation. - Chemical Reactions: Perfect for mixing reagents or solutions thoroughly to ensure uniform results. - Sample Preparation: Efficiently shake samples for extraction processes or homogenization.

Condition: used, This listing is for a Heidolph Polymax 1040 Wave Platform Shaker. The unit is in full working condition and is ready for immediate release. Elevate your laboratory's capabilities with the Heidolph Polymax 1040 Wave Platform Shaker, a versatile and reliable solution designed for a wide range of applications, including cell culture, mixing, and incubation. This medium-sized shaker is engineered to provide optimal performance while ensuring gentle and effective agitation for your samples. Key Features: Variable Tilt Angles: Choose between a 5° tilt angle for soft, gentle movements or a 10° tilt angle for more vigorous shaking, accommodating various vessel types such as culture plates, media bottles, and Erlenmeyer flasks. Adjustable Speed Control: Easily set and adjust the speed from 2 to 50 rpm using the intuitive analog control knob, making it ideal for delicate cell culture applications. Temperature Control Compatibility: Designed to work seamlessly with a modular incubator system, the Polymax 1040 supports variable temperature control up to 65 °C, allowing for precise incubation conditions. Hnjdpfx Asxx Ah Soagel Technical Specifications: Maximum Load Capacity: 5 kg Shaking Type: Orbital rocking shaker Analog Timer: Set for unattended operation from 1 to 120 minutes, with an acoustic alarm signaling when the time is up. Benefits: Unmatched Versatility: The Polymax 1040 can handle a variety of vessels, giving you the flexibility to conduct multiple experiments without limitations. User-Friendly Operation: The straightforward analog controls and timer make it easy to set up and monitor your experiments, ensuring reliable results every time. Robust Design: With a shipping weight of 10 kg and a durable construction, this shaker is built to withstand the demands of everyday laboratory use. Choose the Heidolph Polymax 1040 Wave Platform Shaker for a dependable, high-performance shaking solution that meets the diverse needs of your laboratory. Experience enhanced efficiency and precision in your mixing and incubation processes today!

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Hsdpfxefy T H Io Aagonl 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Here we offer the BYK Gardner micro-TRI device for measuring surface gloss. Technical data: Gloss: Measuring areas: for high gloss 20° 10 x 10 mm, medium gloss 60° 9 x 15 mm, matt gloss 85° 5 x 38 mm. Measurement time: 0.5 seconds Measuring range: 20° 0 - 2000 GE / 60° 0 - 1000 GE / 85° 0 - 160 GE Repeatability: 0 - 99.9 GE 0.2 GE / 100 - 2000 GE 0.5% Comparability: 0 - 99.9 GE 0.5 GE / 100 - 2000 GE 0.5% Layer thickness: Hnjdpfx Aaevn Emgegjl Substrate: Fe magnetic and NFe non-magnetic Measuring range: 0 - 500 µm (0 - 20 mil) Repeatability ± 2% / basic tolerance ± 1.5 (± 0.06 mil)

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively Hnodpswm Nq Esfx Aagjl

Condition: used, Year of construction: 2000, functionality: not functional, BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed Hedpfx Aaey Splgegsnl • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition. Plastics-only medical device use. Y-Axis, live tooling, tailstock, workpiece unloader. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2009 Location: Ireland Availability: Immediate Machine Overview We are pleased to offer this 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition, available through Used Machine Tools Ireland. This machine was used only for dry machining of plastics by a medical device manufacturer, meaning: No heavy metal cutting No coolant contamination Exceptionally low mechanical wear The Mori Seiki NL Series is globally recognised as a benchmark for high-precision CNC turning, and the NL2000Y/500 is especially sought after due to its Y-axis capability, live tooling, and BMT (Built-in Motor Turret) design. Key Features & Benefits Y-Axis CNC Lathe – complex milling and turning in one setup BMT Turret Technology – superior rigidity, accuracy, and thermal stability Live Tooling up to 6,000 RPM – ideal for milling, drilling, and tapping Medical / Plastics-Only Use – extremely clean operating history Tailstock & Workpiece Unloader – ideal for automated production MSX-850 III Control – powerful, reliable Mori Seiki control system Technical Specifications – Mori Seiki NL2000Y/500 Capacity Hodpfx Asyhqkzeagonl Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis: 260 mm Z-Axis: 590 mm Y-Axis: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial & radial driven toolholders ✔ Selection of static toolholders ✔ Extraction unit for plastic machining Additional Notes Used exclusively for dry plastic machining No coolant system fitted, however the machine is prepared for coolant installation and can be added at cost Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Plastic & polymer machining Precision CNC turning & milling Aerospace, electronics & high-tolerance components This Mori Seiki NL2000Y/500 CNC Lathe represents a rare opportunity to acquire a premium Japanese turning centre with an exceptionally clean usage history.

Condition: used, Year of construction: 2019, Used machine Hedew Nadyspfx Aagjnl Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Hnodpfoy Au Arox Aagjl Feed pumps and blower available if required. *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: used, mileage: 227,000 km, power: 265 kW (360.30 HP), first registration: 04/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, Manufacturer MAN Model TGS 26.360 6x4H?4 Simon Moos KSA VacuDrain Hnedpfxou A Hnxs Aagel Year 2013 Condition Good Serial Number WMA35SZZXDM618777 Ref. nr. 1017672 Reg. date: Hk: 360 Km: 227000 Gearbox: Manual Eurotype: 5 Diesel tank: 1 Tank liter: 400 L Rear view camera: ? Air conditioning: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65R22.5 - 315/80R22.5 - 385/65R22.5 Cover% left 50% 50% 50% Front suspension: Feather Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 17735 Kg Load capacity 8265 Kg Manufacturer: Simon Moos KSA 1275 Type 1 High pressure pump: Pratissoli KF36 High pressure capacity: 120 l/min - 120 bar High pressure pump hours: 204 Vacuum pump: Samson V15 (KS725) Vacuum capacity: 900 m3/h Vacuum pump timer: 3157 Sludge pump: Allweiler AEB 1L 551 Sludge pump capacity: 30 m3/h Sludge pump hours: 2397 Polymer pump: Allweiler SNP 25.1 Polymer pump capacity: 2.4 m3/h Polymer pump hours: 2347 Remote control: ? Water heater: ? Tank capacity sludge tank: 4900 L Tank capacity drainage tank: 8400 L Tank capacity polymer tank: 1700 L Tank capacity reject water tank: 3600 L Suction hose 3" 1x30m + 2x15m Flush hose: 1x80m + 1x8 m - 1/2"

Condition: excellent (used), functionality: fully functional, 1 x Leumi ABL outfeed packing system, comprising of a stainless-steel rotary accumulation table (“lazy susan”) with integrated incline conveyor, ideal for product collection, buffering, and feeding into downstream packaging equipment. Suitable for a wide range of food and non-food applications. This unit allows operators to efficiently manage product flow, reducing manual handling and improving line efficiency: 1 x Leumi ABL outfeed inclined conveyor. Overall dimensions – 2010mm long x 1000mm wide x 1110mm high. Hsdpfx Aaoyzxbvegsnl 1 x Leumi ABL lazy susan with polymer top. Technical Specification ⚙️ ✅ Type: Rotary accumulation table with incline conveyor ✅ Table Diameter: 1200mm ✅ Height: 850mm ✅ Top: Polymer surface ✅ Electrical Supply: 1 Phase ✅ Construction: Stainless steel frame Key Features ✔️ Integrated incline conveyor for product transfer ✔️ Hygienic, easy-clean design ✔️ Variable speed control for flexible operation ✔️ Compact footprint – ideal for end-of-line or feeding applications ✔️ Suitable for bottles, containers, sachets, and general packaged goods Condition: Good used condition. Fully operational.