Used Kern for sale (40)

Condition: used, This listing is for a Kern PCB 250-3 Balance. The unit is in full working condition and is ready for immediate release. Bjdpfxjxx Atzo Abbolr The Kern PCB 250-3 is a Precision Laboratory Balance that is highly accurate, fully programmable and comes with a range of advanced features for precise record keeping and weighing. The balance is suitable for weighing and counting even the smallest parts. The balance is supplied with an 81mm weighing plate. A built-in recipe function makes determining the exact measurements of a mixture as easy as possible. This mode will allow you to weigh the specific parts of a mixture, record each value and recall your measurements afterwards for reference. Pre-tare function - manually subtracts known container weights Fully programmable - configure the balance to measure in special units such as length of thread g/m, paper weight g/m² or similar Percentage determination - store a given weight value (100%) and determine deviations from the target value CAL EXT function - adjust the balance's accuracy with an external adjustment weight RS232 interface - allows the balance to interface with a PC or printer GLP/ISO record keeping of weighing data with date, time and identification number Dedicated Recipe function logs the weight of a tare container plus the recipe's ingredients % Determination mode - calculates % deviations from a target value (100%) Vibration-free weighing - filters out vibrations to maintain stable weight results Supplied with a weighing range of 250g Manufacturer's part: Kern PCB 250-3

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Bjdpfx Aboxn Axcebelr

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Bsdsxz D Rgepfx Abbelr Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: excellent (used), With C-axis With driven tools Swing over bed 400 mm Distance between centers 1000 mm Spindle speeds 1-3'000 rpm Control: SIEMENS 840D sl ShopTurn Misc. accessories Bjdjx A E H Sspfx Abbolr MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1994, Manual Plus control unit Turning diameter 260 mm Swing diameter 475 mm Center distance 1000 mm Turning length 880 mm Bodpfxot T T Uro Abbelr Spindle speed 3,000 min-1 4-fold parat holder Tailstock

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bedpfx Abov D H E Nobelr

Condition: used, This listing is for a Kern EMB 220-1 Balance. The unit is in full working condition and is ready for immediate release. The Kern EMB 220-1 is a precision balance tailored for laboratory and educational settings. Its compact design and user-friendly features make it an excellent choice for accurate measurements in various environments. Key Features: Capacity and Resolution: Maximum Capacity: 220g Bljdpjxxzi Ujfx Abbsr Resolution: 0.1g This capacity and resolution make it ideal for weighing small samples, chemicals, and powders with precision. Compact Dimensions: Size: 170 x 240 x 38 mm Weight: 600g Its lightweight and compact form factor allow for easy handling and storage, perfect for classroom or lab benches with limited space. User-Friendly Display: The balance features a large LCD display with a digit height of 15 mm, ensuring readability from a distance. This is particularly useful in crowded work spaces. Simple Operation: Designed for ease of use, it operates with a two-button interface, making it accessible for users of all experience levels, including students in educational settings. Tare Function: The tare function facilitates easy adjustments when weighing items in containers, allowing users to exclude the weight of bowls, plates, or cups for accurate net weight readings. Power Supply: The balance runs on batteries (included), enhancing portability. The automatic shut-off function helps conserve battery life during periods of inactivity. Additional Features: It includes a ring-shaped draft shield (available on certain models) to minimize the impact of air currents on measurements, ensuring greater accuracy. A hook for underfloor weighing expands its functional versatility, allowing for weighing larger or bulkier items. Applications: The Kern EMB 220-1 Balance is versatile and suitable for various applications, including: Laboratories: Ideal for weighing chemicals and samples in research and testing environments. Educational Use: Perfect for classrooms where students learn about measurements and experiments. Field Experiments: Lightweight and battery-operated, making it a practical choice for outdoor scientific work. Technical Specifications: Weighing Capacity: 220g Resolution: 0.1g Dimensions: 170 x 240 x 38 mm Weight: 600g Display: Large LCD display with 15 mm digit height Operation: Simple two-button operation Tare Function: Yes Power Supply: Batteries (included) with automatic shut-off function

Condition: excellent (used), Professional stereo microscope KERN OZT 464 from the renowned German manufacturer KERN & Sohn GmbH, designed for industrial, laboratory, electronics, and research applications. Equipped with a high-quality ODC824 digital camera (3.1 MP CMOS, USB 2.0), enabling direct image transfer to a PC – an ideal solution for documentation, inspection, and analysis. Technical specifications: • Microscope model: KERN OZT 464 Bsdpfx Asxmlfijbbolr • Type: stereo, binocular with trinocular camera port • Eyepiece: widefield WF 10x/20 mm • Magnification: approx. 7x – 45x (standard) • Illumination: adjustable LED, upper and lower • Power supply: 100–240 V, 50/60 Hz • Camera: KERN ODC824, 3.1 MP, 1/2” Aptina CMOS, USB 2.0 • Image capture and analysis software (Windows compatible) • Includes power and USB cables Condition: • Device in very good condition, fully functional • Clear and sharp image, smooth mechanical operation • Complete set with all cables, protective cover, and digital camera Applications: • Research and industrial laboratories • Quality control and metrology • Electronics servicing and micromounting • Education, science, and microscopic documentation

Year of construction: 1990, condition: ready for operation (used), Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible. Bledpfxsxx Ufpj Abbjr

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t Bodsr U Skhepfx Abbolr dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 power chuck, tailstock, chipconveyor *

Condition: excellent (used), Year of construction: 1994, Manual Plus control unit Turning diameter 260 mm Swing diameter 475 mm Center distance 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parat holder Bledpfx Aot T T Uxobbjr Tailstock

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Blsdpfxsv D H Dxo Abber

Condition: ready for operation (used), Year of construction: 2008, turning diameter over cross slide: 420 mm, spindle bore: 106 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 420 mm, turning length: 2,000 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, total length: 1,900 mm, total width: 2,100 mm, total height: 1,900 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 1 rpm, overall weight: 5,100 kg, three-jaw chuck diameter: 650 mm, Equipment: rotational speed infinitely variable, The DMT Kern CD650 lathe is suitable for both precision operations and heavy-duty machining. It is ideally suited for small batch and single-piece production. Bledow A Iu Ijpfx Abbsr Additional information: Weight: 5,100 kg Dimensions: Machine: 1.9 m + distance between centers x 2.1 m x 1.9 m (LxWxH) Control cabinet: 1.2 x 0.5 x 1.6 m (LxWxH) Accessories & options: C-axis with drilling, milling, and engraving cycles, including free ICP input Ethernet and USB interface for network connectivity Chip conveyor Original documentation Fixed and traveling steady rest Self-centering 3-jaw chuck Ø400 mm Bdoc Rx Trsw A Iu Iofvsg Independent 4-jaw chuck Ø600 mm Faceplate/claw plate Ø650 mm Various internal/external jaws Fixed and rotating centers Approx. 30 Multifix toolholders, type C Drill chuck with MK5 mount

Condition: good (used), Year of construction: 1989, I'm selling a Kern 822-43 scale, and the scale is in working order. Bjdpfxjvdnn Se Abbolr

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Blodpfxjr D Nmye Abbjr Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m SAUTER turret 12 pos. , VDI 30 Blodpfx Asxhqqmjbbjr chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Condition: like new (used), Year of construction: 2014, Lead and feed screw lathe Kern Turning length: 2000 mm Turning diameter: 650 mm Diameter over cross slide: 420 mm Fixed and travelling steady rest Multifix toolholder size C Bodpfx Absxwm Rbobelr

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Blsdev D H Nbepfx Abbor

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bjdpsv D H Epefx Abbolr

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bledpfev D H Hmox Abbjr

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Blsdpfxsv D H H Tj Abbor

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bljdpov D H N Isfx Abbjr

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bsdpfx Aov D H H Hobbjlr

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bledpfx Aov D H Rxobber

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bodpfev D H Iqex Abbelr