Used Pneumatic Toggle Press for sale (17,719)

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Powered by air- 6 bar Gbsdpfx Aiowqcbfsveu Measurments: by client demands

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Godpfx Ajzk Eqmsivjbu Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: good (used), Manufacturer: unknown Type press: P 14 (?) Type: Table mounting press Dimensions: 150 x 220 x 750 mm Gbjdjrt Immopfx Aivsu Table dimensions: 1,500 x 700 x 820 mm Weight: approx. 80 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Gbedpfx Aiez Irbqsvsu Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: new, pressure 500 kN stroke 40 mm throat 73 mm Working height from to 60 - 150 mm table surface area 115 x 70 mm weight of the machine ca. 10 Kg .Toggle lever hand press SPECIAL OFFER!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle Gbodpfjf Nb Exox Aivju • Hand lever arranged in a user-friendly manner, return via spring

Condition: like new (used), machine/vehicle number: 5703202, Max. pressing force: 25 kN Outreach: 105 mm Max. working stroke: 60 mm Table size: 150 x 200 mm Gbedpsy Uv Hcjfx Aivou Through-hole in the table: 25 mm Stroke adjustment: 180 mm Min./max. installation height: 30/210 mm Space requirement without/with lever: 300 x 400 x 640/1100 mm Weight: 74 kg

Condition: excellent (used), CATALOGUE NUMBER: 7993 TECHNICAL DATA - Number of loading areas: 2 - Manually adjustable side clamps: 2 x 4 pieces - Pneumatic vertical clamps: 2 x 4 pieces - Maximum length of glued elements: 2500 mm - Maximum height of glued elements: 1330 mm - Maximum thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000 x 1350 x 2000 mm - Weight: 900 kg ADVANTAGES - Two working areas Gedpfxjzxhcze Aivjbu - Gluing length: 2500 mm - Pneumatic actuators - Guides for gluing thin elements - Unpainted - Mobile – on wheels - Used press, very good condition Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines Gsdpfx Aisu Nftgevobu futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. *

Condition: used, Year of construction: 2016, Column press Tox 4 Mag 008.288 A.001, year 2016 Pressing force: 80 kN Total stroke: 180 mm Power stroke: 12 mm Machine weight: 760 kg Gbedpew D R I Tofx Aivsu

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Two-hand control (two-hand release) Gbedpfox Eiuxex Aivsu 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Magnifying lamp Worktable Ergonomic safety work chair

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines Gbedpfxeu Nfr Ns Aivou futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws i.D. *

Condition: new, pressure 17,0 kN stroke 60 mm throat 105 mm Gbsdpfofv Avnox Aivou Working height from to 75 -180 mm table surface area 170 x 130 mm spindle diameter 25 mm weight of the machine ca. 35 Kg dimensions 260 x 130 x415 mm Knee lever hand presses SPECIAL PRICE!!! HK 1700 stroke 60 mm with crank with fine adjustment of working height Stand height 450 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Gjdpfefv Av Ssx Aivjbu Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: new, pressure 26,0 kN Godpfx Aisfv Avrevjbu stroke 60 mm throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: used, Pneumatische Buchpresse - pneumatic Book Press Kokkelink BP 40 1 Pressplatte  / 1 Press Palte Pressfläche / Press Size max. 400 x 400mm Presshöhe / Press high max. 350mm Presshöhe stufenlos regelbar / Press high steppless adjustable Gewicht / Weight 250kg Gjdpfsx Rq Ruox Aivebu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Table size: 660 x 450 mm Stroke length: 520 mm Gbsdpjq U Rbfofx Aivsu

Condition: good (used), functionality: fully functional, pneumatic Gsdozip N Ropfx Aivsbu

Condition: used, Format: 0x0 Gjdpfx Aisx Rh D Sjvjbu Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm Godpfofv Awaox Aivjbu spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, pressure 100 t distance between columns 310 mm no. of strokes 80 Hub/min ram - range of adjustment 40 mm table surface area 400x300 mm ram surface 250x190 mm table height 960 mm tool hole in ram Ø 35 mm Gbodolp U Sdopfx Aivsu weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2200 m

Condition: new, Year of construction: 2025, functionality: fully functional, Kyori High-Speed Press ANEX 40-1100 with Fixed Stroke Gsdpfx Aoydvgtjivebu Technical Specifications Capacity: 400 kN Die Area (L-R x F-B): 1100 x 600 mm Fixed Stroke Length: 13 mm (other stroke lengths available upon request) Speed with Maximum 180 kg Upper Die Weight (other upper die weights available upon request): 13 mm Stroke Length: 1050 SPM (strokes per minute) Power Supply: 76 kVA Servo Motor Power: 47 kW Die Shut Height: 250 – 300 mm (customizable) Slide Adjustment: 50 mm Strip Inlet Width: max. 200 mm Strip Inlet Height: 90 – 150 mm Additional Information · Highly dynamic, link-motion fixed stroke design · Modern, high-performance PCS100 press control with modular design · Highly efficient drive system for reduced CO2 footprint · Bottom dead center position and crank angle remain unchanged · Industry 4.0 ready via OPC-UA interface · Press force monitoring · Integrated tool monitoring · Integrated PV100 servo feeder system

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm Godjzl E Saopfx Aivsbu ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm stroke 70 mm work stroke 10 mm table surface area 220x190 mm throat 150 mm weight of the machine ca. 350 kg Gjdpfx Asy Umf Aeivjbu

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Gbjdpfx Aijh U Dtusvju Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Gbodoz It Dmepfx Aivou Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.