Used Pneumatic Table for sale (22,140)

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: Dujdpfx Aoxaatnscxop - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation Dodpfx Aexaafqocxoup - stepless speed control - welding torch on / off - Control for turning time

Condition: used, There are 7 pneumatic pickers available for sale. The units were self-built by the customer. Dodpfxeyrl Rde Acxoup

Condition: used, Year of construction: 2005, pressure 30 t Dusdpfsyfwvrex Acxsp Stroke 190 mm distance between columns 440 mm side window 450 mm daylight (max. stroke up, adjustment up) 350 mm table surface area 595x450 / 440x595 mm table height over floor 725 - 900 mm table adjustment range 175 mm ram surface 90 mm power requirement 0,5 kW Weight 1,20 kg dimensions (WxDxH) 1,5 x 1,0 x 2,9 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Basic unit power pack K 30.181-190.10 with stroke limitation, anti-rotation protection, universal underframe UUM 1-200.031, adjustable working height Total stroke 190 mm / power stroke 10 mm

Condition: new, Adopts a typical cross table layout Equipped with a high-precision, high-end gearbox with precise gear shifting Suitable for milling, boring, drilling, reaming, tapping, turning, etc. of large workpieces Fanuc - Siemens - Heidenhain Duodpfxoynzvbs Acxop

Condition: new, BRAND NEW NC ROTARY TABLES Working position: vertical - horizontal Applications: positioning - stepless rotation // interpolation Dusdpfx Ajm Tvz Dscxsp Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – The clamping surface can also be square Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Integration into machines with HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered.

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Dsdsm Tv Azjpfx Acxeup Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: good (used), Year of construction: 1986, CNC Table-type Boring Mill Manufacturer: TOS VARNSDORF Model: WH 10 NC Year: 1986 with Heidenhain TNC 135 control. Spindle diameter: 100 mm Spindle taper: SK50 Spindle speeds: Motor 20 kW Spindle travel: 630 mm Travel paths: X 1250 mm, Y 1100 mm, Z 950 mm Dedoyk Tltjpfx Acxoup Table size: 1000 x 1120 mm, load capacity 3000 kg Weight: 12,800 kg Equipped with coolant system, machine documentation available. Machine not under power.

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, pressing force: 4 t, table width: 245 mm, table length: 360 mm, stroke length: 50 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Max. stroke: 50 mm Max. pressing force: 4 t Table dimensions: approx. 360 x 245 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 700 x 1800 mm Machine weight: 600 kg EQUIPMENT On base frame External reference: Groven - Lot 5 Djdpfx Acsyn Hncsxeup

Condition: not inspected (used), functionality: unexamined, table width: 200 mm, table length: 300 mm, No minimum price – guaranteed sale to the highest bidder! Bidding constitutes a binding obligation to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Table dimensions: 300 x 200 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 500 x 500 x 1400 mm Machine weight: 200 kg External reference: Groven – Lot 1 Duodpfx Aeyn Hcmocxjp

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table Dsdpfxjykzhvs Acxsup -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: used, Year of construction: 2013, machine/vehicle number: 13051888-1/012 Art.-Nr. 6153100, Technical data: - Manufacturer: Unikraft - Type: SHT 1001 G - Year of manufacture: 2013 - Platform dimensions: 1450x1130mm Djdpewxtwyofx Acxjup - Lifting capacity: 1,000kg - Hydraulic lifting device - Net weight: 250kg - Min. height: 82 mm - Max. lifting height: 760 mm - Duration from 82 to 760 mm Lifting height: 18 s - Motor power: 0.75 kW - Anti-pinch strips - Voltage/Hz: 400/50 - Location: Blomberg warehouse

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Dsdpfsxta Dyox Acxoup Location: Supplier

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Table Type Boring and Milling Machine | Brand: TOS-VARNSDORF | Type: VARIA | Year of construction 2005 The machine can be inspected under power by appointment. Dujdpeyr R Syofx Acxop Condition: Fully functional / ready for use. TECHNICAL DATA: - Working spindle diameter: 130 mm - Hollow cone working spindle: ISO 50 - Spindle speed range: 10 - 3.500 rpm - Crosswise adjustment of table X: 4.000 mm - Vertical adjustment spindle box Y: 2.500 mm - Longitudinal adjustment of the column Z: 2.000 mm - Extension of working spindle W: 800 mm - Clamping surface of the table: 1.800 x 1.800 mm - Max. Workpiece weight: 20 tons - Machine weight: approx. 36,85 tons Electrical data: - Total installed power consumption: 110 kVA EQUIPMENT: - CNC Control: SINUMERIK 840D pl - Tool changer (chain magazine): 60-position - Chip conveyor - Documentation - CE marking Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: used, Description For sale is a set of SCHUNK pneumatic 2-jaw power clamping blocks (centrically clamping) including manual/control valve (as shown) and an extensive set of top/clamping jaws (various designs, incl. prism/V-jaws). Ideal for fixture construction, series production, and flexible setups. Djdpfx Asyp Iflocxeup 2 units available Price quoted: net/unit Collection in 57439 Attendorn. Shipping possible.

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Dodpfx Acsyr Numsxsup Possibility to work horizontally or vertically The increment is done by the front handle

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Dedsxpxrhjpfx Acxeup Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Duedpfx Ajxpxrbjcxep Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Duodpfsgp Dymox Acxep Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Dujdjd Iincepfx Acxsp Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 2000 kg 190 mm connected load frequency 400 V total power requirement 0,75 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t Dodpfxofrzt Ao Acxeup dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor Dodjfv Aykopfx Acxsup - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm Dodogxi Ebepfx Acxeup height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery Duodpfxogp Dyqj Acxop

Condition: excellent (used), Manual rotary table Ø 450 mm Total height: 150 mm Base dimensions: Length 580 mm x Depth 500 mm Weight: approx 150 kg Duodpfx Aoyr I Ncocxsp In very good condition