Used Pneumatic Press Stanze With Tools for sale (48,699)

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Hsdodzqmzepfx Aagenl Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, 12-piece die block for GEWA press brake Hsdpfx Aaowbvmiegonl Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Hnsdpfx Aaeh U Dtuogol Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Clinching unit TOX - Pneumatic-Hydro Toxpress Hydro-pneumatic press TOX Pressotechnik KRAFT PAKET Type CRS 03.62 No.: 207599.2 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 tons Projection: 20 mm Installation height: 32 mm - Built-in clinching tool - Pneumatic valve for control - Push-through joining or clinching - For creating a form-fit connection between 2 sheets without piercing or heating the sheets - Mounted on the stand - with simple electrical control and foot switch Own weight: 230 kg Hodpfx Asdz Sqqsagonl Comes from a production plant, sold without electrical control

Year of construction: 2025, condition: new, functionality: fully functional, Rolleri segmented die / lower tool system AMADA: 835 mm x 2, 200 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm, 10 mm. V16 R2 85°, V22 R2 85°, V35 R2 85°, V50 R3 85°. Rolleri segmented upper tool system AMADA: 455 mm, 300 mm, 150 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm x 2, 10 mm and left horn 100 mm + right horn 415 mm. R 0.8 / 85° H 66.5. Hsdpfx Ajyqyfmjagonl

Year of construction: 2025, condition: new, functionality: fully functional, UKB lower die segments / bottom tool system AMADA 415 mm, 835 mm with minor damage (brand Eurostamp) V16 R2 85° Hnedpfsyqyc Ssx Aagsl V22 R2.5 85° V35 R3 85° V50 R4 85° UKB upper tool segments system AMADA 415 mm, 150 mm, 35 mm, 15 mm and horn left/right 100 mm R 0.8 / 85° H 66.5

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Presses are fully operational and in use. For any questions, please contact: Piotr Żołnierczyk - 606 666 023 Hnedpfjy Avb Aex Aagol

Condition: new, pressing force: 3 t, Force 32 kN, stroke 100 mm Hnodpfx Aaoyxmppjgsl

Condition: good (used), Year of construction: 1999, Pneumatic press make SCHMIDT Type:ZHS-2/22 year 1999 with two-hand operation. Hedpfxoiduvcj Aagsnl UVV until 2023.

Year of construction: 2025, condition: new, length 3100 mm height 120 mm width 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on Request V-Openings: - 80.0 mm / 85° / R 10.0 with guide rollers - 50.0 mm / 85° / R 5.0 with guide rollers Hsdpfxoxxml Ie Aagonl - 35.0 mm / 85° / R 4.0 - 22.0 mm / 85° / R 2.5 - 2x Mounting Screws incl. Link Chain

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos Hodpfegph Arex Aagsnl -Dimension: 33 x 170 mm -Length: 1485 mm (1 x 855/630 mm each) -Weight: 44.6 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos Hnedpegwhvaefx Aagjl -Dimensions: 150/101 / H75 mm / 150/77 / H159 mm -Weight: 7.2 kg / 11.4 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool -Tool: for press brake Hnedpecn Rdvefx Aagsl -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for press brake: divided 17 pieces -Tool: 30 ° Hnsdpfxehablws Aagjl -Dimensions: 145 x 35 mm -Total length: 2675 mm -Lengths: 7 x 250 mm / 1 x 175/170/90/85/80/75/70/65/60/55 mm each -Transport dimensions: 600/400 / H170 mm -Weight: 63.2 kg

Condition: used, Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek Hjdpecn Rd Refx Aagonl -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° Hodpfx Ajc R Ug Rjagonl -Dimensions: 190 x 45 mm -Total length: 2125 mm -Lengths: 20/25/30/35/40/45/50/55/60/65/70/75/80/85/90/100/200/500/500 mm -Weight: 84 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided Hnjdpec Saurofx Aagsl -Tool: 88° -Dimensions: 188 x 55 mm -Total length: 351 mm -Lengths: 341/10 mm -Weight: 18.6 kg

Condition: good (used), pressing tool, sheet metal former, forming tool, ball forming tool -Pressing tool: ball forming tool -Radius: 50.11 mm -Hole: Ø 40 mm Hjdpfx Aaovmx T Degonl -Dimensions: Ø 165 x 270 mm -Weight: 18.4 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 14 pieces Hnjdpegwdp Ajfx Aagel -Tool angle: 25° -Drawing: in the photos -Dimension: 25 x 158 mm -Length total: 2615 mm (lengths see parts list photo) -Weight: 47.3 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos Hnjdogph Dhepfx Aagol -Dimension: 29 x 171 mm -Length: 1570 mm (1x 650/500/420 mm each) -Weight: 41.2 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Hedpfx Aasfn Am Degsnl -Tool: split, for press brake -Tool angle: 60° -Drawing: in the photos -Dimension: 25 x 165 mm -Length: 3562 mm (each 1 x 1818/800/387/190/122/85/60/55/45 mm) -Weight: 124 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 88° -Dimensions: 190 x 55 mm -Total length: 1126 mm -Lengths: 338/338/450 mm -Weight: 54 kg Hjdpfec Sauwjx Aagonl

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Hjdpfx Ajc Sqctsagonl -Tool for: press brake -Tool: 45° -Thickness: 25 mm -Total length: 400 mm -Total height: 192 mm -Weight: 15 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 145 x 43 mm -Total length: 2946 mm -Lengths: 25/30/35/40/50/70/100/200/200/300/400/500/996 mm Hnodec R S Hbopfx Aagel -Weight: 92 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 60° -Thickness: 25 mm -Total length: 1570 mm -Lengths: 75/75/120/120/590 mm -Total height: 246 mm -Weight: 44 kg Hnjdpfxoc Spnde Aagol