Used Plum Stoner for sale (212)

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m². Iiedpjv Dxzcjfx Aacoh

Condition: used, functionality: fully functional, Year of construction: 2012, DUE TO CHANGEOVER TO HEUFT THERMAL OIL OVEN TECHNOLOGY WE OFFER: Used HEIN oven system 5 StoneRoll 2 Ecostone² with baking technology 5 HEIN STONEROLL ANNULAR TUBE DECK OVENS ▪ TYPE: SR 106 3/8 ▪ 3 BAKING TRAYS 1000 X 600 PER SHELF ▪ 8 LEVELS = 24 BAKING TRAYS ▪ BAKING SURFACE: 14.4 M² ▪ USABLE HEIGHT PER DECK ~ 178.7 MM ▪ EXTERNAL DIMENSIONS: 1900 X 2500 X 3590 (BHT) ▪ BURNER: OIL ▪ WITH TROLLEY DRIVE ▪ YEAR OF CONSTRUCTION: 2012 ACCESSORIES: ▪ 15 BAKING TROLLEYS WITH 8 TRAYS ▪ 2 STONE TROLLEYS ▪ 1 LOADING TROLLEY ▪ 1 UNLOADING TROLLEY ▪ 1 COOLING TROLLEY 2 HEIN ECOSTONE² RACK OVENS ▪ TYPE: LR1-108-5-D ECOSTONE ▪ ROTATING PLATE ▪ FOR BAKING TRAYS 1000 X 600 ▪ BAKING SURFACE: 12 M² ▪ EXTERNAL DIMENSIONS: 175 X 168 X 2970 (TBH) ▪ CONNECTED LOAD ACCORDING TO MANUFACTURER: 100 KW ▪ BURNER: OIL ▪ TOUCHSCREEN COMPUTER CONTROL ▪ YEAR OF CONSTRUCTION: ONE OVEN BUILT IN 2019, ONE OVEN BUILT IN 2017 Below are the key details: • Loading: We will load the equipment onto the buyer’s trucks. • Condition: Sold as seen on site, without installation or warranty. Iiodpfxju Uubhe Aacsh • Inspection: The ovens are currently operational and can be visited for inspection at their location in St. Vith, Belgium, near the German border. Note: All information is provided to the best of our knowledge but without guarantee. Errors, prior sale, and technical changes are reserved. There may be deviations from the listed accessories.

Year of construction: 2020, condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm Ijdpfx Aaehwd Dnocsih - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: used, diameter 220 mm Iiodpfov Dxy Sjx Aaceh Total height 240 mm Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1981, pressure 100 t punching cross-cut in cmm -- stroke 100 mm throat 510 mm work height max. 1100 mm Twist power 31 Durchm. in 25 mm channels - flange 100-400 mm Number of ventilators 80-400 mm 100-400 mm 100-550 mm punch stroke bei 20 mm Hub: 60 p.Min sheet thickness max. bei Luftbiegung: 10 mm total power requirement 7,5 kW Iisdpfxsvgnnqe Aacsh weight of the machine ca. 2,4 t dimensions of the machine ca. 1,7 x 0,9 x 2,3 m Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 3050 - 4020 mm 4 pieces of upper tools for press brake: Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,-- Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = 670,-- Deer foot upper tool No.2 length: 4020 mm, dimensions see sketch, price = 780.-- Iijdpfxeva I Spj Aacsh (Image 5 & 6) Deer foot upper tool No.4 length: 3050 mm, dimensions see sketch, price = 650.-- Prices plus VAT (Image 7 & 8) Machine dealer with own stock of 1600 m².

Condition: as good as new (ex-display), thickness of jaw 129 / 220 mm Isdpfx Aaeu U T Tpjcsih clamping width 85 / 275 mm high of jaw 40 / 63 mm weight 16 / 70 kg dimensions of the machine ca. 0,45 x 0,2 x 0,15 m Machine dealer with own stock of 1600 m².

Condition: repair required (used), Year of construction: 1989, fuel type: electric, weight max. in kg 1250 kg fork length 950 mm Ijdju I Et Depfx Aacsih stroke height 1500 mm weight 595 kg dimensions of the machine ca. m Electric pedestrian forklift with travel drive in need of repair. He worked well until the end, until all functions stopped. The electrician's diagnosis was a defective circuit board in the charging control. Since we almost never use a forklift anyway, we sell it as in need of repair or as a spare parts carrier. Charger available. No statement can be made about the condition of the armored plate battery because the truck no longer works. Tires brittle, one wheel broken. This is a defective used device, so we are selling it with exclusion of any warranty.

Condition: used, pressure 10 t distance between columns 425 mm dayligth 380 mm spindle diameter 50 mm Isdpfx Aasvgnpheceih weight of the machine ca. 200 kg dimensions of the machine ca. 1,3 x 0,8 x 2 m Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine dealer with own stock of 1600 m². Iiedpfx Asvxllkjacsh

Condition: used, Year of construction: 1975, x-travel 420 mm y-travel 270 mm workpiece height - mm table-size 254 x 482 mm throat 254 / 318 mm grinding spindle speeds 12. - 60.000 U/min. spindle stroke 92 mm spindle turning speed range 90, 136, 184, 280 U/min number of strokes adjustable 2 - 120 Hübe bei 51 mm 0 1,25 µm bei 30 mm Required air-pressure 7 bar weight of the machine ca. 1430 kg dimensions of the machine ca. 1,45 x 1,2 x 2,4 m The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available. Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, Iedpfx Asvgnm Tjacoih groove grinding, eccentric adjustment of the grinding spindle. Machine body made of Meehanit cast, strong internal ribbing, cross slide fully supported - no overhang of the table, heating in the main spindle housing. Special price! Machine dealer with own stock of 1600 m².

Condition: used, faceplate diameter 400 / 450 mm bore 100 / 120 mm faceplate - height 120/165 mm short taper Din 55022 7 Gr. 11 Iiedpou U T Itsfx Aaceh Four-jaw face plate. Short taper - design, according to DIN 55022/27, size 11, with 6 studs, reversible top jaws, Baking individually via threaded spindles only individually adjustable. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1990, number of spindles 11 diameter 220 mm throat 110 mm Boring power 10 mm spindle distance 55 - 175 mm weight 17,3 kg speeds 2600 U/min dimensions of the machine ca. 220 x 270 x 370 mm Multi-spindle drill head Romai KF 18 10 11 (11 drives, 3 cardan shafts, fixed Drilling pattern plate, i.e. adjustable by changing the spindle mounting plate, Iodpfx Aeuh E Rgoaceih 10 mm drilling capacity per spindle. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 297 mm Iiedpfx Ajwbvi Reacoh bore stroke 120 mm speeds 8 / 75 - 1600 U/min table-size 500 x 460 mm spindle taper MK 4 column diameter 115 mm spindle feeds: 3 / 0,1 - 0,26 mm/U distance spindle /table 715 mm distance spindle/base plate 1180 mm engine output 1,5 kW table rotating 360 Grad weight of the machine ca. 335 kg dimensions of the machine ca. 0,5 x 0,76 x 1,89 m Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: new, filling capacity 750 kg max. workpiece height 900 x 300 mm workpiece weight total 550 kg max. workpiece weight 30 kg/Stck. revolutions per minute 22 U/min filling amount 50-60 % Colour blau 5015 RAL 0 1775 x 440 mm Iiedpfx Ajv S Iq Ajaceh total power requirement 3 kW weight of the machine ca. 1995 kg dimensions of the machine ca. 2,9 x 1,33 x 1,75 m New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. The EVO model is available for light to medium workpieces. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workpieces + 300 kg deburring medium = hard manganese balls Pic 6 or cast iron pentagons Pic 7. These are over Sideros available. Stepless speed adjustment via frequency converter approx. 13-22 rpm (2850,-- €) Soundproof housing (65/70 Db) photo 7 and Sideros ECO B2 dust extraction against Available at extra cost. For complicated workpieces, the manufacturer recommends 100 kg sample parts of the material to be deburred to the factory for testing before ordering. VIDEO on our website. Machine dealer with own stock of 1600 m².

Condition: new, filling capacity 750 kg max. workpiece height 900 x 300 mm workpiece weight total 550 kg max. workpiece weight 30 kg / Stck. revolutions per minute 22 U/min filling amount 50-60 % Iodpfx Ajvv H Tdsacjih Colour blau 5015 RAL 0 1775 x 440 mm total power requirement 3 kW weight of the machine ca. 1995 kg dimensions of the machine ca. 2,9 x 1,33 x 1,75 m New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. The EVO model is available for light to medium workpieces. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workpieces + 300 kg deburring medium = hard manganese balls pic 6 or cast iron pentagons pic 7. These are over Sideros available. Stepless speed adjustment via frequency converter approx. 13-22 rpm (2850,-- €) Soundproof housing (65/70 Db) photo 7 and Sideros ECO B2 dust extraction against Available at extra cost. For complicated workpieces, the manufacturer recommends 100 kg sample parts of the material to be deburred to the factory for testing before ordering. VIDEO on our website. Machine dealer with own stock of 1600 m².

Condition: new, filling capacity 300 kg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 625 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg range L-W-H 1 x 1,7 x 1,29 mm New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller Iijdpfx Asu Uu T Rjacsh shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2010, max. wheel diameter 180 mm gear width 40 mm max. module 4 min. module 1 M62 is a manually operated go/no go measuring station for checking the usual gear parameters on gear wheels. Due to the high-precision measuring tools and its robust design, the M62 Flex is ideal for monitoring the quality of gears under workshop conditions during production. M62 provides an accurate and robust solution for quick inspection ofgear teeth after machining, such as hobbing, shaving, grinding and honing on the production line. MARPOSS Industrial PC E9066 N with WINDOWS XP with 15" LCD display with 8 or 12 measuring ports for connecting 12 measuring sensors. Machine dealer with own stock of 1600 m². Isdpfx Asvzh Nqeacsih

Condition: new, sheet width 1290 mm Ijdpsvzhgpofx Aacjih plate thickness 5 mm pre-bending ja roll diameter 120 mm roll speed 1 - 6 m/min total power requirement 1,1 kW weight of the machine ca. 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, pressure 40 t stroke 250 mm table-size 625 x 1100 mm flat steel flat 200 x 20 tube diameter max. 2" table height 950 mm work speed 9,1 - 4,7 mm/sec return speed 45 mm/sec weight of the machine ca. 750 kg dimensions of the machine ca. 1,25 x 0,9 x 1 m total power requirement 3 kW quantity of oil 45 l New hydraulic horizontal bending press with stepless pressure regulation under load, patented tool holder, the BOTTOM cylinder allows 360° bends! Immersion depth and retraction point adjustable by handwheel,stepless feed Iijdovx Dwrjpfx Aacsh adjustment. The machine is in the following sizes obtainable: pressure from 22 until 150 t, stroke from 200 until 450 mm. Many tools are in offer for the different kind of bending with additional price list. For more information please look at the video.

Condition: new, table diameter 800 mm table load 2 t swivelling range --> 95 Grad max. torque 1250 Nm table rotation speed 2 U/min Working height from to 550 - 1300 vertikal mm Working height from to 650 - 1400 horiz. mm total power requirement 2,53 kW weight of the machine ca. 930 kg dimensions of the machine ca. 1,85 x 1,66 m Video available on our website. Electric 400 Volt Hand control panel Hydraulic-device Hydraulic positioner for permanent turning right + left, tilting, Iijdpfx Aaek Rfwtocjh Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m². Iiedpfxovp Sd Is Aacoh

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Isdpfx Asvw Du Usacjih Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: used, Year of construction: 1998, max. wheel diameter 200 mm gear width 140 mm max. module 5 workpiece length - max. 400 mm external diameter min. 20 mm control Siemens Sinumerik max. tool diameter 270 mm Max. mould width 50,8 mm Distance of shafts min/max. 120/230 mm axial cross angle -18 / -21 ° shaving wheel spindle turning speeds max. 400 U/min weight of the machine ca. 5,5 t Iiodpfx Asvtgq Reacjh dimensions of the machine ca. 3,6 x 2,6 x 3,3 m The ZSE 150 scraping machine is used in small and medium series production as a universal scraping machine with a deburring unit on the back. Compact and easily accessible, all operating elements and the work area are easy to reach from the operator's location. A large operator door provides unhindered access to the work area. This enables simple and quick conversion and tool changing processes. This machine is equipped with a pallet ring magazine. Regardless of whether it is for plunge, diagonal or parallel feed or for corrections such as conicity or crowning, all feeds and correction movements are carried out by the scraping head. The simple automatic loading due to the stationary workpiece is also the result of this machine concept and enables the construction of an extremely stable machine bed. This in turn is a basic requirement for achieving the highest gearing qualities. The CNC control controls the axes according to the attached sketch. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), max. wheel diameter 150 mm gear width 1 - 200 mm max. module 4 Ijdpfxovzhg No Aacjih min. module 1 control Sinumerik 840 D table diameter 140 mm maximum axial offset 200 mm milling tool taper ISO 40 diameter of hob max. 130 mm cutter length max. 220 mm milling spindle speeds (infinitely variable) 300 - 1200 U/min shifting max. 170 mm milling head -swivable +/- 45 ° feed speeds 1 - 1500 mm/min rapid travel speed 3000 m/min max. workpiece diameter im Magazin: 150 mm total power requirement 50 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,7 x 3,6 x 2,6 m Used gear hobbing machine, Pfauter, new in 1992 completely overhauled in 2023 by the specialist company SerWeMa, with Siemens Sinumerik 840 D control system and workpiece magazine.